# File: xorg.conf # File generated by fglrxconfig (C) ATI Research, a substitute for xf86config. # Note by ATI: the below copyright notice is there for servicing possibly # pending third party rights on the file format and the instance of this file. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # DRI Section # ********************************************************************** # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** # ********************************************************************** # Server flags section. # ********************************************************************** # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: # === ATI device section === #Section "Device" # Identifier "ATI Graphics Adapter" # Driver "fglrx" ## ### generic DRI settings ### ## === disable PnP Monitor === # #Option "NoDDC" ## === disable/enable XAA/DRI === # Option "no_accel" "no" # Option "no_dri" "no" ## === misc DRI settings === # Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr ## ### FireGL DDX driver module specific settings ### ## === Screen Management === # Option "DesktopSetup" "0x00000000" # Option "MonitorLayout" "AUTO, AUTO" # Option "IgnoreEDID" "off" # Option "HSync2" "unspecified" # Option "VRefresh2" "unspecified" # Option "ScreenOverlap" "0" ## === TV-out Management === # Option "NoTV" "yes" # Option "TVStandard" "NTSC-M" # Option "TVHSizeAdj" "0" # Option "TVVSizeAdj" "0" # Option "TVHPosAdj" "0" # Option "TVVPosAdj" "0" # Option "TVHStartAdj" "0" # Option "TVColorAdj" "0" # Option "GammaCorrectionI" "0x00000000" # Option "GammaCorrectionII" "0x00000000" ## === OpenGL specific profiles/settings === # Option "Capabilities" "0x00000000" ## === Video Overlay for the Xv extension === # Option "VideoOverlay" "on" ## === OpenGL Overlay === ## Note: When OpenGL Overlay is enabled, Video Overlay ## will be disabled automatically # Option "OpenGLOverlay" "off" ## === Center Mode (Laptops only) === # Option "CenterMode" "off" ## === Pseudo Color Visuals (8-bit visuals) === # Option "PseudoColorVisuals" "off" ## === QBS Management === # Option "Stereo" "off" # Option "StereoSyncEnable" "1" ## === FSAA Management === # Option "FSAAEnable" "no" # Option "FSAAScale" "1" # Option "FSAADisableGamma" "no" # Option "FSAACustomizeMSPos" "no" # Option "FSAAMSPosX0" "0.000000" # Option "FSAAMSPosY0" "0.000000" # Option "FSAAMSPosX1" "0.000000" # Option "FSAAMSPosY1" "0.000000" # Option "FSAAMSPosX2" "0.000000" # Option "FSAAMSPosY2" "0.000000" # Option "FSAAMSPosX3" "0.000000" # Option "FSAAMSPosY3" "0.000000" # Option "FSAAMSPosX4" "0.000000" # Option "FSAAMSPosY4" "0.000000" # Option "FSAAMSPosX5" "0.000000" # Option "FSAAMSPosY5" "0.000000" ## === Misc Options === # Option "UseFastTLS" "0" # Option "BlockSignalsOnLock" "on" # Option "UseInternalAGPGART" "yes" # Option "ForceGenericCPU" "no" ## BusID "PCI:1:0:0" # no device found at config time # Screen 0 #EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. ### EOF ### Section "ServerLayout" # The Identifier line must be present # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". Identifier "Server Layout" Screen "Screen0" 0 0 InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # # FontPath "/usr/X11R6/lib/X11/fonts/local/" # FontPath "/usr/X11R6/lib/X11/fonts/misc/" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:-1" EndSection Section "Module" # This loads the DBE extension module. # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. # This loads the Type1 and FreeType font modules # Load "glx" # libglx.a Load "dri" # libdri.a Load "dbe" # Double buffer extension Load "extmod" # Option "omit xfree86-dga" Load "type1" Load "freetype" # This loads the GLX module EndSection Section "InputDevice" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Identifier "Keyboard1" Driver "kbd" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) Option "XkbModel" "pc105" Option "XkbLayout" "us,ru" Option "XkbVariant" ",winkeys" Option "XkbOptions" "grp:ctrl_shift_toggle" EndSection Section "InputDevice" # Identifier and driver # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ImPS/2" Option "ZAxisMapping" "4 5" Option "Device" "/dev/input/mice" # When using XQUEUE, comment out the above two lines, and uncomment EndSection Section "Monitor" # Option "DPMS" # === mode lines based on GTF === # VGA @ 100Hz # Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync # SVGA @ 100Hz # Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync # XVGA @ 100Hz # Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync # 1152x864 @ 60Hz # Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync # 1152x864 @ 85Hz # Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync # 1152x864 @ 100Hz # Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync # 1280x960 @ 75Hz # Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync # 1280x960 @ 100Hz # Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync # SXGA @ 100Hz Identifier "Monitor0" HorizSync 30.0 - 82.0 VertRefresh 50.0 - 85.0 # ModeLine "1280x1024@100" 81.0 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync EndSection Section "Device" # The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified. # Chipset "generic" # The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # installed. Option "MonitorLayout" "AUTO, AUTO" BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 Identifier "Standard VGA" Driver "radeon" VendorName "Unknown" BoardName "Unknown" EndSection Section "Screen" # Device "ATI Graphics Adapter" # DefaultDepth 24 #Option "backingstore" Identifier "Screen0" Device "Standard VGA" Monitor "Monitor0" DefaultDepth 16 # SubSection "Display" # Depth 24 # Modes "1280x1024" # EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" EndSubSection # SubSection "Display" # Depth 15 # Modes "1280x1024" # EndSubSection # SubSection "Display" # Depth 32 # Modes "1280x1024" # EndSubSection EndSection Section "DRI" # Access to OpenGL ICD is allowed for all users: # Access to OpenGL ICD is restricted to a specific user group: # Group 100 # users # Mode 0660 Mode 0666 EndSection