Attachment 1359 Details for Bug 8942 – lspci

lspci

lspci.log (text/plain), 13.06 KB, created by Anton Farygin on 2006-01-27 13:27:00 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Anton Farygin

Created: 2006-01-27 13:27:00 MSK

Size: 13.06 KB

patch

obsolete

>0000:00:00.0 Host bridge: ATI Technologies Inc ATI Radeon Xpress 200 (RS480/RS482/RX480/RX482) Chipset - Host bridge (rev 01)
>	Subsystem: Micro-Star International Co., Ltd.: Unknown device 0361
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>
>0000:00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, cache line size 10
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 00009000-00009fff
>	Memory behind bridge: fd500000-fd5fffff
>	Prefetchable memory behind bridge: bbf00000-dbefffff
>	Expansion ROM at 0000000000009000 [disabled] [size=4K]
>	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] #10 [0041]
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [b8] #08 [a803]
>
>0000:00:04.0 PCI bridge: ATI Technologies Inc: Unknown device 5a36 (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, cache line size 10
>	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
>	I/O behind bridge: 0000a000-0000afff
>	Memory behind bridge: fd600000-fddfffff
>	Prefetchable memory behind bridge: dbf00000-ddefffff
>	Expansion ROM at 000000000000a000 [disabled] [size=4K]
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] #10 [0041]
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [b8] #08 [a803]
>
>0000:00:05.0 PCI bridge: ATI Technologies Inc: Unknown device 5a37 (prog-if 00 [Normal decode])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, cache line size 10
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: fde00000-fe1fffff
>	Prefetchable memory behind bridge: fff00000-000fffff
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] #10 [0041]
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [b8] #08 [a803]
>
>0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
>	Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, cache line size 10
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 00000000febff000 (32-bit, non-prefetchable)
>	Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>
>0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
>	Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, cache line size 10
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 00000000febfe000 (32-bit, non-prefetchable)
>	Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>
>0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) (prog-if 20 [EHCI])
>	Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, cache line size 10
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 00000000febfd000 (32-bit, non-prefetchable)
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>		Bridge: PM- B3+
>	Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>
>0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81)
>	Subsystem: Micro-Star International Co., Ltd.: Unknown device 0361
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Region 0: I/O ports at 0b00
>	Region 1: Memory at 0000000030000000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [b0] #08 [a802]
>
>0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80) (prog-if 8a [Master SecP PriP])
>	Subsystem: Micro-Star International Co., Ltd.: Unknown device 0361
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 17
>	Region 0: I/O ports at <ignored>
>	Region 1: I/O ports at <ignored>
>	Region 2: I/O ports at <ignored>
>	Region 3: I/O ports at <ignored>
>	Region 4: I/O ports at ff00 [size=16]
>	Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>
>0000:00:14.2 Class 0403: ATI Technologies Inc: Unknown device 437b (rev 01)
>	Subsystem: Micro-Star International Co., Ltd.: Unknown device 0361
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, cache line size 10
>	Interrupt: pin ? routed to IRQ 17
>	Region 0: Memory at 00000000febf8000 (64-bit, non-prefetchable)
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>
>0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64
>	Bus: primary=00, secondary=05, subordinate=06, sec-latency=64
>	I/O behind bridge: 0000b000-0000bfff
>	Memory behind bridge: fe200000-feafffff
>	Prefetchable memory behind bridge: ddf00000-dfefffff
>	Expansion ROM at 000000000000b000 [disabled] [size=4K]
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>
>0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE) (prog-if 00 [VGA])
>	Subsystem: Micro-Star International Co., Ltd.: Unknown device 0361
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, cache line size 10
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at 00000000c0000000 (32-bit, prefetchable) [size=00000000fd5c0000]
>	Region 1: I/O ports at 9800 [size=256]
>	Region 2: Memory at 00000000fd5f0000 (32-bit, non-prefetchable) [size=64K]
>	Expansion ROM at 0000000000020000 [disabled]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] #10 [0001]
>	Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>
>0000:04:00.0 Ethernet controller: Agere Systems: Unknown device ed00 (rev 01)
>	Subsystem: Micro-Star International Co., Ltd.: Unknown device 0361
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, cache line size 10
>	Interrupt: pin A routed to IRQ 3
>	Region 0: Memory at 00000000fe000000 (64-bit, non-prefetchable)
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [48] #10 [0001]
>	Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>
>0000:05:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21)
>	Subsystem: Micro-Star International Co., Ltd.: Unknown device 0361
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 168
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 00000000fe200000 (32-bit, non-prefetchable)
>	Bus: primary=05, secondary=06, subordinate=09, sec-latency=176
>	Memory window 0: 32000000-33fff000 (prefetchable)
>	Memory window 1: 34000000-35fff000
>	I/O window 0: 0000b000-0000b0ff
>	I/O window 1: 0000b400-0000b4ff
>	BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>
>0000:05:04.2 Class 0805: O2 Micro, Inc.: Unknown device 7120 (rev 01)
>	Subsystem: Micro-Star International Co., Ltd.: Unknown device 0361
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at 00000000feaffc00 (32-bit, non-prefetchable)
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:05:04.3 Bridge: O2 Micro, Inc.: Unknown device 7130 (rev 01)
>	Subsystem: Micro-Star International Co., Ltd.: Unknown device 0361
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at 00000000feafe000 (32-bit, non-prefetchable)
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:05:04.4 FireWire (IEEE 1394): O2 Micro, Inc.: Unknown device 00f7 (rev 02) (prog-if 10 [OHCI])
>	Subsystem: O2 Micro, Inc.: Unknown device 00f7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, cache line size 10
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 00000000feafd000 (32-bit, non-prefetchable)
>	Region 1: Memory at 00000000feaff000 (32-bit, non-prefetchable) [size=2K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>
>0000:05:09.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
>	Subsystem: Micro-Star International Co., Ltd.: Unknown device 6833
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, cache line size 10
>	Interrupt: pin A routed to IRQ 5
>	Region 0: Memory at 00000000feafa000 (32-bit, non-prefetchable)
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 8942: 1358 | 1359 | 1360