Attachment 2445 Details for Bug 14631 – вывод dmesg

вывод dmesg

dmesg (text/plain), 20.25 KB, created by stalker on 2008-02-23 21:58:32 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: stalker

Created: 2008-02-23 21:58:32 MSK

Size: 20.25 KB

patch

obsolete

>Linux version 2.6.18-std-smp-alt12 (builder@apiary.armor.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt12)) #1 SMP Mon Feb 11 00:44:54 MSK 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003e790000 (usable)
> BIOS-e820: 000000003e790000 - 000000003e79e000 (ACPI data)
> BIOS-e820: 000000003e79e000 - 000000003e7e0000 (ACPI NVS)
> BIOS-e820: 000000003e7e0000 - 000000003e800000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>103MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>On node 0 totalpages: 255888
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 26512 pages, LIFO batch:7
>DMI 2.4 present.
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x000fad70
>ACPI: XSDT (v001 NEC             0x05000730 MSFT 0x00000097) @ 0x3e790100
>ACPI: FADT (v003 MSTEST OEMFACP  0x05000730 MSFT 0x00000097) @ 0x3e790290
>ACPI: MADT (v001 MSTEST OEMAPIC  0x05000730 MSFT 0x00000097) @ 0x3e790390
>ACPI: MCFG (v001 MSTEST OEMMCFG  0x05000730 MSFT 0x00000097) @ 0x3e790400
>ACPI: SLIC (v001 NEC             0x05000730 MSFT 0x00000097) @ 0x3e790440
>ACPI: OEMB (v001 MSTEST AMI_OEM  0x05000730 MSFT 0x00000097) @ 0x3e79e040
>ACPI: HPET (v001 MSTEST OEMHPET  0x05000730 MSFT 0x00000097) @ 0x3e79a250
>ACPI: GSCI (v001 MSTEST GMCHSCI  0x05000730 MSFT 0x00000097) @ 0x3e79e0c0
>ACPI: DSDT (v001  A0579 A0579000 0x00000000 INTL 0x20060113) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a202 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3e800000:c0600000)
>Detected 1866.795 MHz processor.
>Built 1 zonelists.  Total pages: 255888
>Kernel command line: BOOT_IMAGE=2618-std-smp-12 ro root=805 panic=30
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1010432k/1023552k available (1591k kernel code, 12496k reserved, 638k data, 192k init, 106048k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 3736.06 BogoMIPS (lpj=7472130)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>checking if image is initramfs... it is
>Freeing initrd memory: 489k freed
>ACPI: Core revision 20060707
>ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist.
>CPU0: Intel(R) Core(TM)2 CPU          6320  @ 1.86GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3733.41 BogoMIPS (lpj=7466835)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6320  @ 1.86GHz stepping 06
>Total of 2 processors activated (7469.48 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>migration_cost=39
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:07: ioport range 0x290-0x297 has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: ff500000-ff5fffff
>  PREFETCH window: bbe00000-bfdfffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: bfe00000-bfefffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: a000-afff
>  MEM window: ff600000-ff6fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: b000-bfff
>  MEM window: ff700000-ff7fffff
>  PREFETCH window: 40000000-400fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1203426114.816:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 7616k
>vesafb: mode is 800x600x16, linelength=1600, pages=6
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 192k freed
>Executing init=/init
>input: AT Translated Set 2 keyboard as /class/input/input0
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0xE880 ctl 0xE802 bmdma 0xE080 irq 217
>ata2: SATA max UDMA/133 cmd 0xE480 ctl 0xE402 bmdma 0xE088 irq 217
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>ATA: abnormal status 0x7F on port 0xE487
>  Vendor: ATA       Model: ST380815AS        Rev: 3.AA
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda4 < sda5 sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata3: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xC800 irq 217
>ata4: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC808 irq 217
>scsi2 : ata_piix
>ATA: abnormal status 0x7F on port 0xD087
>scsi3 : ata_piix
>ATA: abnormal status 0x7F on port 0xCC07
>ahci 0000:02:00.0: version 2.0
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ata5: SATA max UDMA/133 cmd 0xF8874100 ctl 0x0 bmdma 0x0 irq 169
>ata6: SATA max UDMA/133 cmd 0xF8874180 ctl 0x0 bmdma 0x0 irq 169
>scsi4 : ahci
>ata5: SATA link down (SStatus 0 SControl 300)
>scsi5 : ahci
>ata6: SATA link down (SStatus 0 SControl 300)
>raid5: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  6908.000 MB/sec
>raid5: using function: pIII_sse (6908.000 MB/sec)
>raid6: int32x1    686 MB/s
>raid6: int32x2    748 MB/s
>raid6: int32x4    649 MB/s
>raid6: int32x8    623 MB/s
>raid6: mmxx1     2419 MB/s
>raid6: mmxx2     2534 MB/s
>raid6: sse1x1    1673 MB/s
>raid6: sse1x2    1993 MB/s
>raid6: sse2x1    3153 MB/s
>raid6: sse2x2    3577 MB/s
>raid6: using algorithm sse2x2 (3577 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>input: PC Speaker as /class/input/input1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>USB Universal Host Controller Interface driver v3.0
>Linux agpgart interface v0.102 (c) Dave Jones
>3w-9xxx: scsi6: AEN: INFO (0x04:0x0053): Battery capacity test is overdue:.
>scsi6 : 3ware 9000 Storage Controller
>3w-9xxx: scsi6: Found a 3ware 9000 Storage Controller at 0xff5ff000, IRQ: 169.
>3w-9xxx: scsi6: Firmware FE9X 3.08.02.005, BIOS BE9X 3.08.00.002, Ports: 8.
>  Vendor: AMCC      Model: 9650SE-8LP DISK   Rev: 3.08
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 3906166784 512-byte hdwr sectors (1999957 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>SCSI device sdb: drive cache: write back, no read (daft)
>SCSI device sdb: 3906166784 512-byte hdwr sectors (1999957 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>SCSI device sdb: drive cache: write back, no read (daft)
> sdb: sdb1
>sd 6:0:0:0: Attached scsi disk sdb
>sd 6:0:0:0: Attached scsi generic sg1 type 0
>JMB363: IDE controller at PCI slot 0000:02:00.1
>ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 177
>JMB363: chipset revision 3
>JMB363: 100% native mode on irq 177
>    ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>agpgart: Detected an Intel 965G Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>ts: Compaq touchscreen protocol output
>Probing IDE interface ide1...
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000d880
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 177, io base 0x0000dc00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000d400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 217, io base 0x0000d480
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 233, io base 0x0000d800
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 233, io mem 0xff9fb800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 225, io mem 0xff9fb400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 19 (level, low) -> IRQ 217
>skge 1.9 addr 0xff7fc000 irq 217 chip Yukon-Lite rev 9
>skge eth0: addr 00:1b:fc:9e:0f:63
>PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 233
>Adding 6144820k swap on /dev/sda6.  Priority:-1 extents:1 across:6144820k
>EXT3 FS on sda5, internal journal
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem sdb1
>Ending clean XFS mount for filesystem: sdb1
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (7996 buckets, 63968 max) - 228 bytes per conntrack
>skge eth0: enabling interface
>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>All bugs added by David S. Miller <davem@redhat.com>
>localnet: add 01:00:5e:00:00:01 mcast address to master interface
>wan: add 01:00:5e:00:00:01 mcast address to master interface
>skge eth0: Link is up at 1000 Mbps, full duplex, flow control none
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>nfsd: last server has exited
>nfsd: unexporting all filesystems
>RPC: failed to contact portmap (errno -5).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>3w-9xxx: scsi6: AEN: INFO (0x04:0x004E): Battery capacity test started:.
>3w-9xxx: scsi6: AEN: INFO (0x04:0x0055): Battery charging started:.
>3w-9xxx: scsi6: AEN: INFO (0x04:0x0056): Battery charging completed:.
>3w-9xxx: scsi6: AEN: INFO (0x04:0x0050): Battery capacity test completed:255 hours.
>3w-9xxx: scsi6: AEN: INFO (0x04:0x0055): Battery charging started:.
>3w-9xxx: scsi6: AEN: INFO (0x04:0x0056): Battery charging completed:.

Actions: View

Attachments on bug 14631: 2445 | 2446