Attachment 3067 Details for Bug 17892 – Логи с установленного Школьного Сервера на m/b VIA 2000+

Логи с установленного Школьного Сервера на m/b VIA 2000+

debian.txt (text/plain), 15.28 KB, created by Storke on 2008-11-14 16:30:48 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Storke

Created: 2008-11-14 16:30:48 MSK

Size: 15.28 KB

patch

obsolete

>server:/home/vv# lspci -v
>00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
>        Subsystem: VIA Technologies, Inc. Unknown device 0000
>        Flags: bus master, 66MHz, medium devsel, latency 8
>        Memory at e0000000 (32-bit, prefetchable) [size=64M]
>        Capabilities: [a0] AGP version 2.0
>        Capabilities: [c0] Power Management version 2
>
>00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
>        Flags: bus master, 66MHz, medium devsel, latency 0
>        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>        Memory behind bridge: dde00000-dfefffff
>        Prefetchable memory behind bridge: d5d00000-ddcfffff
>        Capabilities: [80] Power Management version 2
>
>00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
>        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>        Flags: bus master, medium devsel, latency 32, IRQ 11
>        I/O ports at e400 [size=32]
>        Capabilities: [80] Power Management version 2
>
>00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
>        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>        Flags: bus master, medium devsel, latency 32, IRQ 5
>        I/O ports at e800 [size=32]
>        Capabilities: [80] Power Management version 2
>
>00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
>        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>        Flags: bus master, medium devsel, latency 32, IRQ 9
>        I/O ports at ec00 [size=32]
>        Capabilities: [80] Power Management version 2
>
>00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
>        Subsystem: VIA Technologies, Inc. USB 2.0
>        Flags: bus master, medium devsel, latency 32, IRQ 10
>        Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
>        Capabilities: [80] Power Management version 2
>
>00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
>        Subsystem: VIA Technologies, Inc. Unknown device 0000
>        Flags: bus master, stepping, medium devsel, latency 0
>        Capabilities: [c0] Power Management version 2
>
>00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
>        Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
>        Flags: bus master, medium devsel, latency 32, IRQ 14
>        I/O ports at fc00 [size=16]
>        Capabilities: [c0] Power Management version 2
>
>00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
>        Subsystem: Elitegroup Computer Systems Unknown device a101
>        Flags: medium devsel, IRQ 9
>        I/O ports at e000 [size=256]
>        Capabilities: [c0] Power Management version 2
>
>00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
>        Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235
>        Flags: bus master, medium devsel, latency 32, IRQ 11
>        I/O ports at dc00 [size=256]
>        Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
>        Capabilities: [40] Power Management version 2
>
>01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03) (prog-if 00 [VGA])
>        Subsystem: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics
>        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
>        Memory at d8000000 (32-bit, prefetchable) [size=64M]
>        Memory at de000000 (32-bit, non-prefetchable) [size=16M]
>        Expansion ROM at dfef0000 [disabled] [size=64K]
>        Capabilities: [60] Power Management version 2
>        Capabilities: [70] AGP version 2.0 
>
>server:/home/vv# lsusb -v
>
>Bus 004 Device 003: ID 090c:1000 Feiya Technology Corp. Memory Bar
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               2.00
>  bDeviceClass            0 (Defined at Interface level)
>  bDeviceSubClass         0
>  bDeviceProtocol         0
>  bMaxPacketSize0        64
>  idVendor           0x090c Feiya Technology Corp.
>  idProduct          0x1000 Memory Bar
>  bcdDevice           11.00
>  iManufacturer           1 LG Electronics
>  iProduct                2 USB Drive
>  iSerial                 3 AA04012700007609
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           32
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0
>    bmAttributes         0x80
>      (Bus Powered)
>    MaxPower              100mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           2
>      bInterfaceClass         8 Mass Storage
>      bInterfaceSubClass      6 SCSI
>      bInterfaceProtocol     80 Bulk (Zip)
>      iInterface              0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0200  1x 512 bytes
>        bInterval             255
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x02  EP 2 OUT
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0200  1x 512 bytes
>        bInterval             255
>Device Qualifier (for other device speed):
>  bLength                10
>  bDescriptorType         6
>  bcdUSB               2.00
>  bDeviceClass            0 (Defined at Interface level)
>  bDeviceSubClass         0
>  bDeviceProtocol         0
>  bMaxPacketSize0        64
>  bNumConfigurations      1
>Device Status:     0x0000
>  (Bus Powered)
>
>Bus 004 Device 001: ID 0000:0000
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               2.00
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 Unused
>  bDeviceProtocol         1 Single TT
>  bMaxPacketSize0        64
>  idVendor           0x0000
>  idProduct          0x0000
>  bcdDevice            2.06
>  iManufacturer           3 Linux 2.6.18-6-486 ehci_hcd
>  iProduct                2 EHCI Host Controller
>  iSerial                 1 0000:00:10.3
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 Unused
>      bInterfaceProtocol      0 Full speed hub
>      iInterface              0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0002  1x 2 bytes
>        bInterval              12
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             6
>  wHubCharacteristic 0x000a
>    No power switching (usb 1.0)
>    Per-port overcurrent protection
>    TT think time 8 FS bits
>  bPwrOn2PwrGood       10 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0100 power
>   Port 3: 0000.0100 power
>   Port 4: 0000.0100 power
>   Port 5: 0000.0000
>   Port 6: 0000.0503 highspeed power enable connect
>Device Status:     0x0003
>  Self Powered
>  Remote Wakeup Enabled
>
>Bus 003 Device 001: ID 0000:0000
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 Unused
>  bDeviceProtocol         0 Full speed hub
>  bMaxPacketSize0        64
>  idVendor           0x0000
>  idProduct          0x0000
>  bcdDevice            2.06
>  iManufacturer           3 Linux 2.6.18-6-486 uhci_hcd
>  iProduct                2 UHCI Host Controller
>  iSerial                 1 0000:00:10.2
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 Unused
>      bInterfaceProtocol      0 Full speed hub
>      iInterface              0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0002  1x 2 bytes
>        bInterval             255
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             2
>  wHubCharacteristic 0x000a
>    No power switching (usb 1.0)
>    Per-port overcurrent protection
>  bPwrOn2PwrGood        1 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0301 lowspeed power connect
>   Port 2: 0000.0100 power
>Device Status:     0x0003
>  Self Powered
>  Remote Wakeup Enabled
>
>Bus 002 Device 001: ID 0000:0000
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 Unused
>  bDeviceProtocol         0 Full speed hub
>  bMaxPacketSize0        64
>  idVendor           0x0000
>  idProduct          0x0000
>  bcdDevice            2.06
>  iManufacturer           3 Linux 2.6.18-6-486 uhci_hcd
>  iProduct                2 UHCI Host Controller
>  iSerial                 1 0000:00:10.1
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 Unused
>      bInterfaceProtocol      0 Full speed hub
>      iInterface              0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0002  1x 2 bytes
>        bInterval             255
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             2
>  wHubCharacteristic 0x000a
>    No power switching (usb 1.0)
>    Per-port overcurrent protection
>  bPwrOn2PwrGood        1 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0300 lowspeed power
>Device Status:     0x0003
>  Self Powered
>  Remote Wakeup Enabled
>
>Bus 001 Device 001: ID 0000:0000
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 Unused
>  bDeviceProtocol         0 Full speed hub
>  bMaxPacketSize0        64
>  idVendor           0x0000
>  idProduct          0x0000
>  bcdDevice            2.06
>  iManufacturer           3 Linux 2.6.18-6-486 uhci_hcd
>  iProduct                2 UHCI Host Controller
>  iSerial                 1 0000:00:10.0
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 Unused
>      bInterfaceProtocol      0 Full speed hub
>      iInterface              0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0002  1x 2 bytes
>        bInterval             255
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             2
>  wHubCharacteristic 0x000a
>    No power switching (usb 1.0)
>    Per-port overcurrent protection
>  bPwrOn2PwrGood        1 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0100 power
>Device Status:     0x0003
>  Self Powered
>  Remote Wakeup Enabled
>
>server:/home/vv# lspci -D
>0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
>0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
>0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
>0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
>0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
>0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
>0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
>0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
>0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
>0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
>0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03)

Actions: View

Attachments on bug 17892: 3067