Attachment 3089 Details for Bug 17971 – я этим ядром всё нормально

я этим ядром всё нормально

dmesg-2.6.18-ovz-smp-alt24 (text/plain), 16.49 KB, created by Sergey Y. Afonin on 2008-11-25 19:17:24 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Sergey Y. Afonin

Created: 2008-11-25 19:17:24 MSK

Size: 16.49 KB

patch

obsolete

>Bootdata ok (command line is auto BOOT_IMAGE=2618-ovz-smp-24 ro root=805 panic=30)
>Linux version 2.6.18-ovz-smp-alt24 (builder@apiary.armor.altlinux.org) (gcc version 4.1.2 20070626 (ALT Linux, build 4.1.2-alt2)) #1 SMP Tue May 6 19:11:08 MSD 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fcf0000 (usable)
> BIOS-e820: 000000003fcf0000 - 000000003fd96000 (ACPI NVS)
> BIOS-e820: 000000003fd96000 - 000000003fdfd000 (usable)
> BIOS-e820: 000000003fdfd000 - 000000003fe5f000 (reserved)
> BIOS-e820: 000000003fe5f000 - 000000003fe6a000 (usable)
> BIOS-e820: 000000003fe6a000 - 000000003fedf000 (ACPI NVS)
> BIOS-e820: 000000003fedf000 - 000000003fee7000 (usable)
> BIOS-e820: 000000003fee7000 - 000000003feff000 (ACPI data)
> BIOS-e820: 000000003feff000 - 000000003ff00000 (usable)
> BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fff80000 - 00000000fff8c000 (reserved)
>DMI 2.5 present.
>ACPI: RSDP (v002 INTEL                                 ) @ 0x00000000000f03c0
>ACPI: XSDT (v001 INTEL  S3200SHC 0x00000000 INTL 0x01000013) @ 0x000000003fefe120
>ACPI: FADT (v003 INTEL  S3200SHC 0x00000000 MSFT 0x01000013) @ 0x000000003fefb000
>ACPI: MADT (v001 INTEL  S3200SHC 0x00000000 MSFT 0x01000013) @ 0x000000003fef4000
>ACPI: WDDT (v001 INTEL  S3200SHC 0x00000000 MSFT 0x01000013) @ 0x000000003fef3000
>ACPI: MCFG (v001 INTEL  S3200SHC 0x00000000 MSFT 0x01000013) @ 0x000000003fef2000
>ACPI: SPCR (v001 INTEL  S3200SHC 0x00000000 MSFT 0x01000013) @ 0x000000003fef1000
>ACPI: DMAR (v001 INTEL  S3200SHC 0x00000001 MSFT 0x01000013) @ 0x000000003fef0000
>ACPI: SSDT (v001 INTEL   Cpu0Ist 0x00000010 MSFT 0x01000013) @ 0x000000003feef000
>ACPI: SSDT (v001 INTEL   Cpu1Ist 0x00000010 MSFT 0x01000013) @ 0x000000003feee000
>ACPI: SSDT (v001 INTEL   Cpu2Ist 0x00000010 MSFT 0x01000013) @ 0x000000003feed000
>ACPI: SSDT (v001 INTEL   Cpu3Ist 0x00000010 MSFT 0x01000013) @ 0x000000003feec000
>ACPI: SSDT (v001 INTEL     CpuPm 0x00000010 MSFT 0x01000013) @ 0x000000003feeb000
>ACPI: HEST (v001 INTEL  S3200SHC 0x00000001 INTL 0x00000001) @ 0x000000003feea000
>ACPI: BERT (v001 INTEL  S3200SHC 0x00000001 INTL 0x00000001) @ 0x000000003fee9000
>ACPI: ERST (v001 INTEL  S3200SHC 0x00000001 INTL 0x00000001) @ 0x000000003fee8000
>ACPI: EINJ (v001 INTEL  S3200SHC 0x00000001 INTL 0x00000001) @ 0x000000003fee7000
>ACPI: DSDT (v001 INTEL  S3200SHC 0x00000000 MSFT 0x01000013) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003ff00000
>Bootmem setup node 0 0000000000000000-000000003ff00000
>On node 0 totalpages: 256149
>  DMA zone: 2790 pages, LIFO batch:0
>  DMA32 zone: 253359 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 5, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 0000000000100000
>Nosave address range: 000000003fcf0000 - 000000003fd96000
>Nosave address range: 000000003fdfd000 - 000000003fe5f000
>Nosave address range: 000000003fe6a000 - 000000003fedf000
>Nosave address range: 000000003fee7000 - 000000003feff000
>Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
>Built 1 zonelists.  Total pages: 256149
>Kernel command line: auto BOOT_IMAGE=2618-ovz-smp-24 ro root=805 panic=30
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 1995.063 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>Memory: 1022792k/1047552k available (1919k kernel code, 22752k reserved, 1265k data, 220k init)
>Calibrating delay using timer specific routine.. 3993.19 BogoMIPS (lpj=7986397)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>Freeing SMP alternatives: 28k freed
>Page beancounter hash is 65536 entries.
>checking if image is initramfs... it is
>Freeing initrd memory: 437k freed
>ACPI: Core revision 20060707
>ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist.
>Using local APIC timer interrupts.
>result 12469140
>Detected 12.469 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.30 BogoMIPS (lpj=7980603)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Pentium(R) Dual  CPU  E2180  @ 2.00GHz stepping 0d
>Brought up 2 CPUs
>testing NMI watchdog ... OK.
>migration_cost=11
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at f0000000
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>Boot video device is 0000:02:00.0
>PCI: Firmware left 0000:03:00.0 e100 interrupts enabled, disabling
>PCI: Firmware left 0000:03:01.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>pnp: 00:06: ioport range 0x500-0x53f has been reserved
>pnp: 00:06: ioport range 0x400-0x47f could not be reserved
>pnp: 00:06: ioport range 0xca0-0xcaf has been reserved
>pnp: 00:06: ioport range 0x680-0x6ff has been reserved
>pnp: 00:06: ioport range 0x800-0x87f could not be reserved
>pnp: 00:06: ioport range 0x600-0x61f has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: 41000000-418fffff
>  PREFETCH window: 40000000-40ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-1fff
>  MEM window: 41900000-419fffff
>  PREFETCH window: 50000000-500fffff
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1227645765.484:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>NET: Registered protocol family 1
>Freeing unused kernel memory: 220k freed
>Executing init=/init
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>GSI 17 sharing vector 0xC9 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x2430 irq 14
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>  Vendor: ATA       Model: ST380815AS        Rev: 4.AA
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
>sd 0:0:0:0: Attached scsi disk sda
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2438 irq 15
>scsi1 : ata_piix
>ATA: abnormal status 0x7F on port 0x177
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 21 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata3: SATA max UDMA/133 cmd 0x2448 ctl 0x2466 bmdma 0x2410 irq 201
>ata4: SATA max UDMA/133 cmd 0x2440 ctl 0x2462 bmdma 0x2418 irq 201
>scsi2 : ata_piix
>ATA: abnormal status 0x7F on port 0x244F
>scsi3 : ata_piix
>ATA: abnormal status 0x7F on port 0x2447
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>input: PC Speaker as /class/input/input0
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v3.0
>GSI 18 sharing vector 0xD1 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 209, io base 0x000020c0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Real Time Clock Driver v1.12ac
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 201, io base 0x000020a0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>FDC 0 is a National Semiconductor PC87306
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1a.2 to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 169, io base 0x00002080
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>GSI 19 sharing vector 0xD9 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 217, io base 0x00002060
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>GSI 20 sharing vector 0xE1 and IRQ 20
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 225, io base 0x00002040
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 209, io base 0x00002020
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 169, io mem 0x41a21400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 217, io mem 0x41a21000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 209
>Adding 2048248k swap on /dev/sda7.  Priority:-1 extents:1 across:2048248k
>EXT3 FS on sda5, internal journal
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda10, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (4092 buckets, 32736 max) - 312 bytes per conntrack

Actions: View

Attachments on bug 17971: 3089 | 3090 | 3091 | 3092