Attachment 3100 Details for Bug 18043 – dmesg для alt3

dmesg для alt3

dmesg_2.6.27-std-def-alt3 (text/plain), 32.18 KB, created by Denis Klimov on 2008-11-29 21:43:13 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Denis Klimov

Created: 2008-11-29 21:43:13 MSK

Size: 32.18 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-std-def-alt3 (builder@apiary.armor.altlinux.org) (gcc version 4.3.2 20081105 (ALT Linux 4.3.2-alt6) (GCC) ) #1 SMP Tue Nov 25 17:05:26 UTC 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f5b2000 (usable)
> BIOS-e820: 000000003f5b2000 - 000000003f5d5000 (ACPI NVS)
> BIOS-e820: 000000003f5d5000 - 000000003f5e6000 (reserved)
> BIOS-e820: 000000003f5e6000 - 000000003f5e9000 (ACPI NVS)
> BIOS-e820: 000000003f5e9000 - 000000003f605000 (reserved)
> BIOS-e820: 000000003f605000 - 000000003f606000 (ACPI NVS)
> BIOS-e820: 000000003f606000 - 000000003f608000 (reserved)
> BIOS-e820: 000000003f608000 - 000000003f611000 (ACPI data)
> BIOS-e820: 000000003f611000 - 000000003f617000 (ACPI NVS)
> BIOS-e820: 000000003f617000 - 000000003f700000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>AMI BIOS detected: BIOS may corrupt low RAM, working it around.
>last_pfn = 0x3f5b2 max_arch_pfn = 0x100000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>kernel direct mapping tables up to 38000000 @ 10000-15000
>RAMDISK: 00e88000 - 00eff211
>ACPI: RSDP 000F03C0, 0024 (r2 MSI_NB)
>ACPI: XSDT 3F60FF10, 005C (r1 MSI_NB MEGABOOK  6222004 MSFT    10013)
>ACPI: FACP 3F5E6C10, 00F4 (r4 MSI_NB MEGABOOK  6222004 MSFT    10013)
>ACPI: DSDT 3F608010, 5337 (r1 MSI_NB MEGABOOK        0 INTL 20051117)
>ACPI: FACS 3F611D40, 0040
>ACPI: APIC 3F610E90, 005C (r2 MSI_NB MEGABOOK  6222004 MSFT    10013)
>ACPI: MCFG 3F615C90, 003C (r1 MSI_NB MEGABOOK  6222004 MSFT       97)
>ACPI: SLIC 3F612C10, 0176 (r1 MSI_NB MEGABOOK  6222004 MSFT       97)
>ACPI: SSDT 3F605510, 04CE (r2  PmRef    CpuPm     3000 INTL 20051117)
>ACPI: SSDT 3F5E8A10, 0232 (r2  PmRef  Cpu0Tst     3000 INTL 20051117)
>ACPI: SSDT 3F611A10, 00A0 (r2  PmRef  Cpu1Tst     3000 INTL 20051117)
>117MB HIGHMEM available.
>896MB LOWMEM available.
>  mapped low ram: 0 - 38000000
>  low ram: 00000000 - 38000000
>  bootmap 00011000 - 00018000
>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000200000 - 00006bd2c0]    TEXT DATA BSS ==> [0000200000 - 00006bd2c0]
>  #4 [0000e88000 - 0000eff211]          RAMDISK ==> [0000e88000 - 0000eff211]
>  #5 [00006be000 - 00006c1000]    INIT_PG_TABLE ==> [00006be000 - 00006c1000]
>  #6 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
>  #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
>  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x00038000
>  HighMem  0x00038000 -> 0x0003f5b2
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009e
>    0: 0x00000100 -> 0x0003f5b2
>On node 0 totalpages: 259392
>free_area_init_node: node 0, pgdat c058a380, node_mem_map c1000240
>  DMA zone: 3946 pages, LIFO batch:0
>  Normal zone: 223300 pages, LIFO batch:31
>  HighMem zone: 29865 pages, LIFO batch:7
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 3f700000:c0400000)
>PERCPU: Allocating 38428 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257111
>Kernel command line: auto BOOT_IMAGE=2627-std-def-3 ro root=803 panic=30
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>TSC: PIT calibration deviates from PMTIMER: 1396800 1599996.
>TSC: Using PIT calibration value
>Detected 1396.800 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1021808k/1038024k available (2495k kernel code, 15468k reserved, 1215k data, 404k init, 120520k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffe18000 - 0xfffff000   (1948 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc05a7000 - 0xc060c000   ( 404 kB)
>      .data : 0xc046fea0 - 0xc059fd40   (1215 kB)
>      .text : 0xc0200000 - 0xc046fea0   (2495 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>spurious 8259A interrupt: IRQ7.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.60 BogoMIPS (lpj=5587200)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 24K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20080609
>ACPI: Checking initramfs for custom DSDT
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
>CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
>APIC calibration not consistent with PM Timer: 87ms instead of 100ms
>APIC delta adjusted to PM-Timer: 833331 (727571)
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3200.01 BogoMIPS (lpj=6400034)
>CPU: L1 I cache: 32K, L1 D cache: 24K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (5993.61 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level SIBLING
>  groups: 0 1
>  domain 1: span 0-1 level CPU
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level SIBLING
>  groups: 1 0
>  domain 1: span 0-1 level CPU
>   groups: 0-1
>net_namespace: 840 bytes
>NET: Registered protocol family 16
>EISA bus registered
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: DMI System Vendor: MICRO-STAR INTERNATIONAL CO., LTD
>ACPI: DMI Product Name: U-100
>ACPI: DMI Product Version: Ver.001
>ACPI: DMI Board Name: U-100
>ACPI: DMI BIOS Vendor: American Megatrends Inc.
>ACPI: DMI BIOS Date: 07/16/2008
>ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: EC: GPE storm detected, transactions will use polling mode
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: 0000:00:02.0 reg 10 32bit mmio: [dfe80000, dfefffff]
>PCI: 0000:00:02.0 reg 14 io port: [d0f0, d0f7]
>PCI: 0000:00:02.0 reg 18 32bit mmio: [c0000000, cfffffff]
>PCI: 0000:00:02.0 reg 1c 32bit mmio: [dff00000, dff3ffff]
>PCI: 0000:00:02.1 reg 10 32bit mmio: [dfe00000, dfe7ffff]
>PCI: 0000:00:1b.0 reg 10 64bit mmio: [ffe00000, ffe03fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>PCI: 0000:00:1d.0 reg 20 io port: [d080, d09f]
>PCI: 0000:00:1d.1 reg 20 io port: [d060, d07f]
>PCI: 0000:00:1d.2 reg 20 io port: [d040, d05f]
>PCI: 0000:00:1d.3 reg 20 io port: [d020, d03f]
>PCI: 0000:00:1d.7 reg 10 32bit mmio: [dff40000, dff403ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed03000
>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: 0000:00:1f.2 reg 10 io port: [d0e0, d0e7]
>PCI: 0000:00:1f.2 reg 14 io port: [d0d0, d0d3]
>PCI: 0000:00:1f.2 reg 18 io port: [d0c0, d0c7]
>PCI: 0000:00:1f.2 reg 1c io port: [d0b0, d0b3]
>PCI: 0000:00:1f.2 reg 20 io port: [d0a0, d0af]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>PCI: 0000:01:00.0 reg 10 io port: [c000, c0ff]
>PCI: 0000:01:00.0 reg 18 64bit mmio: [ffd10000, ffd10fff]
>PCI: 0000:01:00.0 reg 20 64bit mmio: [ffd00000, ffd0ffff]
>PCI: 0000:01:00.0 reg 30 32bit mmio: [dfd00000, dfd0ffff]
>pci 0000:01:00.0: supports D1
>pci 0000:01:00.0: supports D2
>pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>PCI: bridge 0000:00:1c.0 io port: [c000, cfff]
>PCI: bridge 0000:00:1c.0 32bit mmio: [dfd00000, dfdfffff]
>PCI: bridge 0000:00:1c.0 64bit mmio pref: [ffd00000, ffdfffff]
>PCI: 0000:02:00.0 reg 10 io port: [b000, b0ff]
>PCI: 0000:02:00.0 reg 14 32bit mmio: [dfc00000, dfc03fff]
>pci 0000:02:00.0: supports D1
>pci 0000:02:00.0: supports D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:00.0: PME# disabled
>PCI: bridge 0000:00:1c.1 io port: [b000, bfff]
>PCI: bridge 0000:00:1c.1 32bit mmio: [dfc00000, dfcfffff]
>pci 0000:00:1e.0: transparent bridge
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed03000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>tracer: 772 pages allocated for 65536 entries of 48 bytes
>   actual entries 65620
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>ACPI: EC: missing confirmations, switch off interrupt mode.
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:05: ioport range 0x4d0-0x4d1 has been reserved
>system 00:09: ioport range 0x400-0x47f has been reserved
>system 00:09: ioport range 0x1180-0x119f has been reserved
>system 00:09: ioport range 0x500-0x53f has been reserved
>system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:09: iomem range 0xfed20000-0xfed23fff has been reserved
>system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:09: iomem range 0xfc800400-0xfc800fff has been reserved
>PM-Timer running at invalid rate: 87% of normal - aborting.
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
>pci 0000:00:1c.0:   MEM window: 0xdfd00000-0xdfdfffff
>pci 0000:00:1c.0:   PREFETCH window: 0x000000ffd00000-0x000000ffdfffff
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.1:   IO window: 0xb000-0xbfff
>pci 0000:00:1c.1:   MEM window: 0xdfc00000-0xdfcfffff
>pci 0000:00:1c.1:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: disabled
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [c000, cfff]
>bus: 01 index 1 mmio: [dfd00000, dfdfffff]
>bus: 01 index 2 mmio: [ffd00000, ffdfffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 io port: [b000, bfff]
>bus: 02 index 1 mmio: [dfc00000, dfcfffff]
>bus: 02 index 2 mmio: [0, 0]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 mmio: [0, 0]
>bus: 03 index 1 mmio: [0, 0]
>bus: 03 index 2 mmio: [0, 0]
>bus: 03 index 3 io port: [0, ffff]
>bus: 03 index 4 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 476k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1228000834.096:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1761
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: found MSI capability
>pci_express 0000:00:1c.1:pcie00: allocate port service
>pci_express 0000:00:1c.1:pcie02: allocate port service
>pci_express 0000:00:1c.1:pcie03: allocate port service
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed03000 is busy
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>EISA: Probing bus 0 at eisa.0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP bic registered
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 404k freed
>Write protecting the kernel text: 2496k
>Write protecting the kernel read-only data: 1020k
>Executing init=/init
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>Clocksource tsc unstable (delta = 63882620 ns)
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>No dock devices found.
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd0a0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd0a8 irq 15
>ata1.00: ATA-8: WDC WD800BEVT-22ZCT0, 11.01A11, max UDMA/133
>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BEVT-22 11.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>r8169 0000:01:00.0: setting latency timer to 64
>r8169 0000:01:00.0: unknown MAC (37a00000)
>eth0: RTL8169 at 0xf884c000, 00:21:85:47:28:48, XID 34a00000 IRQ 221
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>iTCO_vendor_support: vendor-support=0
>Linux agpgart interface v0.103
>ieee80211_crypt: registered algorithm 'NULL'
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ieee80211_crypt: registered algorithm 'CCMP'
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>ieee80211_crypt: registered algorithm 'WEP'
>ieee80211_crypt: registered algorithm 'TKIP'
>
>Linux kernel driver for RTL8180 / RTL8185 based WLAN cards
>Copyright (c) 2004-2005, Andrea Merello
>rtl8180: Initializing module
>rtl8180: Wireless extensions version 22
>rtl8180: Initializing proc filesystem
>agpgart-intel 0000:00:00.0: Intel 945GME Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>Error: Driver 'pcspkr' is already registered, aborting...
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-std-def-alt3 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d060
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: Power Button (FF) [PWRF]
>ACPI: SSDT 3F5E8C90, 0253 (r2  PmRef  Cpu0Ist     3000 INTL 20051117)
>ACPI: SSDT 3F5E7690, 0653 (r2  PmRef  Cpu0Cst     3001 INTL 20051117)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/PNP0C09:00/PNP0C0D:00/input/input4
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
>ACPI: SSDT 3F5E8F10, 00D0 (r2  PmRef  Cpu1Ist     3000 INTL 20051117)
>ACPI: SSDT 3F611B10, 0083 (r2  PmRef  Cpu1Cst     3000 INTL 20051117)
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-std-def-alt3 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Sleep Button (CM) [SLPB]
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-std-def-alt3 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d020
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (60 C)
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27-std-def-alt3 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff40000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27-std-def-alt3 ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>rtl8180: Configuring chip resources
>rtl8180 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>rtl8180 0000:02:00.0: setting latency timer to 64
>rtl8180: Channel plan is 2
>
>Dot11d_Init()
>rtl8180: MAC controller is a RTL8187SE b/g
>rtl8180: This is a PCI NIC
>rtl8180: usValue is 0x100
>
>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input7
>rtl8180: EEPROM version 104
>rtl8180: WW:**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!
>rtl8180: IRQ 17
>rtl8180: Driver probe completed
>
>usb 5-1: new high speed USB device using ehci_hcd and address 2
>acpi device:1c: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1a/input/input8
>usb 5-1: configuration #1 chosen from 1 choice
>usb 5-1: New USB device found, idVendor=152d, idProduct=2339
>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
>usb 5-1: Product: USB to ATA/ATAPI Bridge
>usb 5-1: Manufacturer: JMicron
>usb 5-1: SerialNumber: 35A4EFFFFFFF
>atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
>ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: WMI: Mapper loaded
>usb 5-5: new high speed USB device using ehci_hcd and address 3
>Marking TSC unstable due to TSC halts in idle
>ACPI: Battery Slot [BAT1] (battery present)
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>usb 5-5: configuration #1 chosen from 1 choice
>usb 5-5: New USB device found, idVendor=0c45, idProduct=62c0
>usb 5-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>usb 5-5: Product: USB 2.0 Camera
>usb 5-5: Manufacturer: Sonix Technology Co., Ltd.
>usb 5-5: SerialNumber: SN0001
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>usb 5-6: new high speed USB device using ehci_hcd and address 4
>usb 5-6: configuration #1 chosen from 1 choice
>usb 5-6: New USB device found, idVendor=0bda, idProduct=0158
>usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 5-6: Product: USB2.0-CRW
>usb 5-6: Manufacturer: Generic
>usb 5-6: SerialNumber: 20071114173400000
>usbcore: registered new interface driver libusual
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>scsi3 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>Linux video capture interface: v2.00
>uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
>input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb5/5-5/5-5:1.0/input/input9
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>EXT3 FS on sda3, internal journal
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>fuse init (API version 7.9)
>scsi 2:0:0:0: Direct-Access     HDS72505 0KLA360               PQ: 0 ANSI: 2 CCS
>sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 38 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 38 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI disk
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>usb-storage: device scan complete
>scsi 3:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>sd 3:0:0:0: [sdc] Attached SCSI removable disk
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>usb-storage: device scan complete
>powernow: This module only works with AMD K7 CPUs
>p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
>p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@vger.kernel.org>
>p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
>p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@vger.kernel.org>
>cpufreq: No nForce2 chipset.
>r8169: eth0: link up
>rtl8180: Bringing up iface
>rtl8180: Card successfully reset
>rtl8180: WIRELESS_MODE_G
>
>NET: Registered protocol family 17
>====>r8180_wx_set_auth()
>====>r8180_wx_set_auth()
>====>r8180_wx_set_auth()
>rtl8180: WW:No more TX desc, returning 2a of 2a
>rtl8180: WW:No more TX desc, returning 2a of 2a
>rtl8180: WW:No more TX desc, returning 2a of 2a
>rtl8180: WW:No more TX desc, returning 2a of 2a
>rtl8180: WW:No more TX desc, returning 2a of 2a
>rtl8180: WW:No more TX desc, returning 2a of 2a
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: WW:nic has lost pointer
>rtl8180: Bringing up iface
>rtl8180: Card successfully reset
>rtl8180: WIRELESS_MODE_G
>
>rtl8180: Bringing up iface
>rtl8180: Card successfully reset
>rtl8180: WIRELESS_MODE_G
>
>atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.

Actions: View

Attachments on bug 18043: 3099 | 3100 | 3101 | 3102