Attachment 3200 Details for Bug 18459 – smart data from sdc, mcp67

smart data from sdc, mcp67

sdc.smart (text/plain), 4.60 KB, created by Sergey Bolshakov on 2009-01-09 18:03:29 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Sergey Bolshakov

Created: 2009-01-09 18:03:29 MSK

Size: 4.60 KB

patch

obsolete

>smartctl version 5.38 [x86_64-alt-linux-gnu] Copyright (C) 2002-8 Bruce Allen
>Home page is http://smartmontools.sourceforge.net/
>
>=== START OF INFORMATION SECTION ===
>Model Family:     SAMSUNG SpinPoint P120 series
>Device Model:     SAMSUNG SP2504C
>Serial Number:    S09QJ1ML508269
>Firmware Version: VT100-38
>User Capacity:    250,059,350,016 bytes
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   7
>ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 4a
>Local Time is:    Fri Jan  9 18:00:10 2009 MSK
>
>==> WARNING: May need -F samsung3 enabled; see manual for details.
>
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x84)	Offline data collection activity
>					was suspended by an interrupting command from host.
>					Auto Offline Data Collection: Enabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		 (4775) seconds.
>Offline data collection
>capabilities: 			 (0x5b) SMART execute Offline immediate.
>					Auto Offline data collection on/off support.
>					Suspend Offline collection upon new
>					command.
>					Offline surface scan supported.
>					Self-test supported.
>					No Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					General Purpose Logging supported.
>Short self-test routine 
>recommended polling time: 	 (   1) minutes.
>Extended self-test routine
>recommended polling time: 	 (  79) minutes.
>
>SMART Attributes Data Structure revision number: 16
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  Always       -       0
>  3 Spin_Up_Time            0x0007   100   100   025    Pre-fail  Always       -       5888
>  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       173
>  5 Reallocated_Sector_Ct   0x0033   253   253   010    Pre-fail  Always       -       0
>  7 Seek_Error_Rate         0x000f   253   253   051    Pre-fail  Always       -       0
>  8 Seek_Time_Performance   0x0025   253   253   015    Pre-fail  Offline      -       0
>  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       19902
> 10 Spin_Retry_Count        0x0033   253   253   051    Pre-fail  Always       -       0
> 11 Calibration_Retry_Count 0x0012   253   002   000    Old_age   Always       -       0
> 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       157
>190 Airflow_Temperature_Cel 0x0022   121   100   000    Old_age   Always       -       39
>194 Temperature_Celsius     0x0022   121   100   000    Old_age   Always       -       39
>195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       39767812
>196 Reallocated_Event_Count 0x0032   253   253   000    Old_age   Always       -       0
>197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       3
>198 Offline_Uncorrectable   0x0030   253   253   000    Old_age   Offline      -       0
>199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
>200 Multi_Zone_Error_Rate   0x000a   100   100   000    Old_age   Always       -       0
>201 Soft_Read_Error_Rate    0x000a   100   100   000    Old_age   Always       -       0
>202 TA_Increase_Count       0x0032   100   100   000    Old_age   Always       -       2
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>No self-tests have been logged.  [To run self-tests, use: smartctl -t]
>
>
>SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
>SMART Selective self-test log data structure revision number 0
>Warning: ATA Specification requires selective self-test log data structure revision number = 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>

Actions: View

Attachments on bug 18459: 3196 | 3197 | 3198 | 3199 | 3200