Attachment 4747 Details for Bug 24896 – dmesg после suspend-to-disk

dmesg после suspend-to-disk

dmesg.suspend_to_disk.log (text/x-log), 65.65 KB, created by Rinat Bikov on 2011-01-11 20:25:40 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Rinat Bikov

Created: 2011-01-11 20:25:40 MSK

Size: 65.65 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 2.6.35-std-def-alt9 (builder@apiary.orion.altlinux.org) (gcc version 4.4.5 20101112 (ALT Linux 4.4.5-alt3) (GCC) ) #1 SMP Thu Dec 9 08:49:02 UTC 2010
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 0000000037fa8000 (usable)
>[    0.000000]  BIOS-e820: 0000000037fa8000 - 0000000037fb0000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 0000000037fb0000 - 0000000037fbe000 (ACPI data)
>[    0.000000]  BIOS-e820: 0000000037fbe000 - 0000000038000000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>[    0.000000] DMI present.
>[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>[    0.000000] last_pfn = 0x37fa8 max_arch_pfn = 0x100000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-EFFFF uncachable
>[    0.000000]   F0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
>[    0.000000]   1 disabled
>[    0.000000]   2 disabled
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] Scanning 0 areas for low memory corruption
>[    0.000000] modified physical RAM map:
>[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
>[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
>[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
>[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
>[    0.000000]  modified: 0000000000100000 - 0000000037fa8000 (usable)
>[    0.000000]  modified: 0000000037fa8000 - 0000000037fb0000 (ACPI NVS)
>[    0.000000]  modified: 0000000037fb0000 - 0000000037fbe000 (ACPI data)
>[    0.000000]  modified: 0000000037fbe000 - 0000000038000000 (ACPI NVS)
>[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
>[    0.000000]  modified: 00000000fee00000 - 00000000fef00000 (reserved)
>[    0.000000]  modified: 00000000ffb80000 - 0000000100000000 (reserved)
>[    0.000000] initial memory mapped : 0 - 01800000
>[    0.000000] found SMP MP-table at [c00ff780] ff780
>[    0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
>[    0.000000]  0000000000 - 0000400000 page 4k
>[    0.000000]  0000400000 - 0037000000 page 2M
>[    0.000000]  0037000000 - 00373fe000 page 4k
>[    0.000000] kernel direct mapping tables up to 373fe000 @ 15000-1b000
>[    0.000000] RAMDISK: 00d23000 - 00f00000
>[    0.000000] ACPI: RSDP 000f9c10 00014 (v00 ACPIAM)
>[    0.000000] ACPI: RSDT 37fb0000 00048 (v01 040808 RSDT2125 20080408 MSFT 00000097)
>[    0.000000] ACPI: FACP 37fb0200 00084 (v02 040808 FACP2125 20080408 MSFT 00000097)
>[    0.000000] ACPI: DSDT 37fb0630 0967B (v01  F5N00 F5N00001 00000001 INTL 20051117)
>[    0.000000] ACPI: FACS 37fbe000 00040
>[    0.000000] ACPI: APIC 37fb0390 00070 (v01 040808 APIC2125 20080408 MSFT 00000097)
>[    0.000000] ACPI: MCFG 37fb0440 0003C (v01 040808 OEMMCFG  20080408 MSFT 00000097)
>[    0.000000] ACPI: OEMX 37fb0480 00176 (v01 040808 OEMX2125 20080408 MSFT 00000097)
>[    0.000000] ACPI: DBGP 37fb0400 00034 (v01 040808 DBGP2125 20080408 MSFT 00000097)
>[    0.000000] ACPI: BOOT 37fb0600 00028 (v01 040808 BOOT2125 20080408 MSFT 00000097)
>[    0.000000] ACPI: OEMB 37fbe040 00071 (v01 040808 OEMB2125 20080408 MSFT 00000097)
>[    0.000000] ACPI: HPET 37fb9cb0 00038 (v01 040808 OEMHPET0 20080408 MSFT 00000097)
>[    0.000000] ACPI: SSDT 37fb9cf0 001EA (v01  AMI   POWERNOW 00000001 AMD  00000001)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 11MB HIGHMEM available.
>[    0.000000] 883MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 373fe000
>[    0.000000]   low ram: 0 - 373fe000
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000010 -> 0x00001000
>[    0.000000]   Normal   0x00001000 -> 0x000373fe
>[    0.000000]   HighMem  0x000373fe -> 0x00037fa8
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[2] active PFN ranges
>[    0.000000]     0: 0x00000010 -> 0x0000009f
>[    0.000000]     0: 0x00000100 -> 0x00037fa8
>[    0.000000] On node 0 totalpages: 229175
>[    0.000000] free_area_init_node: node 0, pgdat c1478e40, node_mem_map c15c7200
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1736 pages used for memmap
>[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 24 pages used for memmap
>[    0.000000]   HighMem zone: 2962 pages, LIFO batch:0
>[    0.000000] Using APIC driver default
>[    0.000000] Detected use of extended apic ids on hypertransport bus
>[    0.000000] ACPI: PM-Timer IO Port: 0x508
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] ACPI: IRQ14 used by override.
>[    0.000000] ACPI: IRQ15 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
>[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] early_res array is doubled to 64 at [18000 - 187ff]
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>[    0.000000] Allocating PCI resources starting at 38000000 (gap: 38000000:c6c00000)
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 13 pages/cpu @c2000000 s30784 r0 d22464 u2097152
>[    0.000000] pcpu-alloc: s30784 r0 d22464 u2097152 alloc=1*4194304
>[    0.000000] pcpu-alloc: [0] 0 1 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227383
>[    0.000000] Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=975a9df1-30b7-4eb4-b2c2-00b806126732 resume=/dev/sda1 panic=30 splash=silent reboot=p printk.time=1
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Enabling fast FPU save and restore... done.
>[    0.000000] Enabling unmasked SIMD FPU exception support... done.
>[    0.000000] Initializing CPU#0
>[    0.000000] allocated 4585440 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] Subtract (49 early reservations)
>[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
>[    0.000000]   #2 [0001000000 - 00015befc4]   TEXT DATA BSS
>[    0.000000]   #3 [0000d23000 - 0000f00000]         RAMDISK
>[    0.000000]   #4 [00015bf000 - 00015c515d]             BRK
>[    0.000000]   #5 [00000ff790 - 0000100000]   BIOS reserved
>[    0.000000]   #6 [00000ff780 - 00000ff790]    MP-table mpf
>[    0.000000]   #7 [000009fc00 - 00000fda80]   BIOS reserved
>[    0.000000]   #8 [00000fdbdc - 00000ff780]   BIOS reserved
>[    0.000000]   #9 [00000fda80 - 00000fdbdc]    MP-table mpc
>[    0.000000]   #10 [0000010000 - 0000011000]      TRAMPOLINE
>[    0.000000]   #11 [0000011000 - 0000015000]     ACPI WAKEUP
>[    0.000000]   #12 [0000015000 - 0000018000]         PGTABLE
>[    0.000000]   #13 [00015c6000 - 00015c7000]         BOOTMEM
>[    0.000000]   #14 [00015c7000 - 0001cc7000]         BOOTMEM
>[    0.000000]   #15 [00015c5180 - 00015c5184]         BOOTMEM
>[    0.000000]   #16 [00015c51c0 - 00015c5280]         BOOTMEM
>[    0.000000]   #17 [00015c5280 - 00015c52d4]         BOOTMEM
>[    0.000000]   #18 [0001cc7000 - 0001cca000]         BOOTMEM
>[    0.000000]   #19 [00015c5300 - 00015c5304]         BOOTMEM
>[    0.000000]   #20 [00015c5340 - 00015c5400]         BOOTMEM
>[    0.000000]   #21 [00015c5400 - 00015c5425]         BOOTMEM
>[    0.000000]   #22 [00015c5440 - 00015c5467]         BOOTMEM
>[    0.000000]   #23 [00015c5480 - 00015c55b4]         BOOTMEM
>[    0.000000]   #24 [00015c55c0 - 00015c5600]         BOOTMEM
>[    0.000000]   #25 [00015c5600 - 00015c5640]         BOOTMEM
>[    0.000000]   #26 [00015c5640 - 00015c5680]         BOOTMEM
>[    0.000000]   #27 [00015c5680 - 00015c56c0]         BOOTMEM
>[    0.000000]   #28 [00015c56c0 - 00015c5700]         BOOTMEM
>[    0.000000]   #29 [00015c5700 - 00015c5740]         BOOTMEM
>[    0.000000]   #30 [00015c5740 - 00015c5780]         BOOTMEM
>[    0.000000]   #31 [00015c5780 - 00015c57c0]         BOOTMEM
>[    0.000000]   #32 [00015c57c0 - 00015c5800]         BOOTMEM
>[    0.000000]   #33 [00015c5800 - 00015c5840]         BOOTMEM
>[    0.000000]   #34 [00015c5840 - 00015c5850]         BOOTMEM
>[    0.000000]   #35 [00015c5880 - 00015c590a]         BOOTMEM
>[    0.000000]   #36 [00015c5940 - 00015c59ca]         BOOTMEM
>[    0.000000]   #37 [0002000000 - 000200d000]         BOOTMEM
>[    0.000000]   #38 [0002200000 - 000220d000]         BOOTMEM
>[    0.000000]   #39 [00015c5a00 - 00015c5a04]         BOOTMEM
>[    0.000000]   #40 [00015c5a40 - 00015c5a44]         BOOTMEM
>[    0.000000]   #41 [00015c5a80 - 00015c5a88]         BOOTMEM
>[    0.000000]   #42 [00015c5ac0 - 00015c5ac8]         BOOTMEM
>[    0.000000]   #43 [00015c5b00 - 00015c5ba8]         BOOTMEM
>[    0.000000]   #44 [00015c5bc0 - 00015c5c28]         BOOTMEM
>[    0.000000]   #45 [0001cca000 - 0001cce000]         BOOTMEM
>[    0.000000]   #46 [0001cce000 - 0001d4e000]         BOOTMEM
>[    0.000000]   #47 [0001d4e000 - 0001d8e000]         BOOTMEM
>[    0.000000]   #48 [000220d000 - 000266c7e0]         BOOTMEM
>[    0.000000] Initializing HighMem for node 0 (000373fe:00037fa8)
>[    0.000000] Memory: 896296k/917152k available (3033k kernel code, 20404k reserved, 1566k data, 532k init, 11944k highmem)
>[    0.000000] virtual kernel memory layout:
>[    0.000000]     fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
>[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>[    0.000000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>[    0.000000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>[    0.000000]       .init : 0xc147e000 - 0xc1503000   ( 532 kB)
>[    0.000000]       .data : 0xc12f64c6 - 0xc147dd68   (1566 kB)
>[    0.000000]       .text : 0xc1000000 - 0xc12f64c6   (3033 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
>[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
>[    0.000000] 	Verbose stalled-CPUs detection is disabled.
>[    0.000000] NR_IRQS:4352 nr_irqs:512
>[    0.000000] spurious 8259A interrupt: IRQ7.
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] Fast TSC calibration failed
>[    0.000000] TSC: PIT calibration matches HPET. 1 loops
>[    0.000000] Detected 1693.651 MHz processor.
>[    0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3387.30 BogoMIPS (lpj=6774604)
>[    0.008448] pid_max: default: 32768 minimum: 301
>[    0.008719] Security Framework initialized
>[    0.008942] SELinux:  Disabled at boot.
>[    0.009224] Mount-cache hash table entries: 512
>[    0.009583] Initializing cgroup subsys ns
>[    0.009803] Initializing cgroup subsys cpuacct
>[    0.010024] Initializing cgroup subsys memory
>[    0.010250] Initializing cgroup subsys devices
>[    0.010473] Initializing cgroup subsys freezer
>[    0.010691] Initializing cgroup subsys net_cls
>[    0.010908] Initializing cgroup subsys blkio
>[    0.011162] CPU: Physical Processor ID: 0
>[    0.012005] CPU: Processor Core ID: 0
>[    0.012222] mce: CPU supports 5 MCE banks
>[    0.012444] using C1E aware idle routine
>[    0.012663] Performance Events: AMD PMU driver.
>[    0.012928] ... version:                0
>[    0.013139] ... bit width:              48
>[    0.013355] ... generic registers:      4
>[    0.013566] ... value mask:             0000ffffffffffff
>[    0.013779] ... max period:             00007fffffffffff
>[    0.013990] ... fixed-purpose events:   0
>[    0.014200] ... event mask:             000000000000000f
>[    0.016682] ACPI: Core revision 20100428
>[    0.032089] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.032831] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.072925] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01
>[    0.076000] Booting Node   0, Processors  #1 Ok.
>[    0.012000] Initializing CPU#1
>[    0.012000] System has AMD C1E enabled
>[    0.160133] Brought up 2 CPUs
>[    0.160136] Total of 2 processors activated (6774.96 BogoMIPS).
>[    0.160131] Switch to broadcast mode on CPU1
>[    0.161372] Switch to broadcast mode on CPU0
>[    0.161372] regulator: core version 0.5
>[    0.161372] NET: Registered protocol family 16
>[    0.161372] EISA bus registered
>[    0.161372] node 0 link 0: io port [5000, ffffff]
>[    0.161372] node 0 link 0: io port [1000, 1fff]
>[    0.161372] TOM: 0000000040000000 aka 1024M
>[    0.161372] node 0 link 0: mmio [e0000000, efffffff]
>[    0.161372] node 0 link 0: mmio [a0000, bffff]
>[    0.161372] node 0 link 0: mmio [40000000, fe0bffff]
>[    0.161372] bus: [00, ff] on node 0 link 0
>[    0.161372] bus: 00 index 0 [io  0x2000-0xffff]
>[    0.161372] bus: 00 index 1 [io  0x0000-0x1fff]
>[    0.161372] bus: 00 index 2 [mem 0x40000000-0xffffffff]
>[    0.161372] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
>[    0.161372] ACPI: bus type pci registered
>[    0.161372] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.161372] PCI: not using MMCONFIG
>[    0.161372] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
>[    0.161372] PCI: Using configuration type 1 for base access
>[    0.168111] bio: create slab <bio-0> at 0
>[    0.169847] ACPI: EC: Look up EC in DSDT
>[    0.171210] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.181008] ACPI: Interpreter enabled
>[    0.181222] ACPI: (supports S0 S3 S4 S5)
>[    0.181658] ACPI: Using IOAPIC for interrupt routing
>[    0.182135] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.184930] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.185303] PCI: Using MMCONFIG for extended config space
>[    0.204190] ACPI: EC: GPE = 0x23, I/O: command/status = 0x66, data = 0x62
>[    0.204403] ACPI: No dock devices found.
>[    0.204580] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.205185] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.205432] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>[    0.205432] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>[    0.205432] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>[    0.205432] pci_root PNP0A03:00: address space collision: host bridge window [mem 0x000d0000-0x000dffff] conflicts with Adapter ROM [mem 0x000cf800-0x000d0fff]
>[    0.205432] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xdfffffff]
>[    0.205432] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfed44fff]
>[    0.205482] pci 0000:00:01.0: reg 10: [io  0x0a00-0x0aff]
>[    0.205526] pci 0000:00:01.1: reg 10: [io  0xdc00-0xdc3f]
>[    0.205539] pci 0000:00:01.1: reg 20: [io  0x0600-0x063f]
>[    0.205545] pci 0000:00:01.1: reg 24: [io  0x0700-0x073f]
>[    0.205569] pci 0000:00:01.1: PME# supported from D3hot D3cold
>[    0.205575] pci 0000:00:01.1: PME# disabled
>[    0.205641] pci 0000:00:01.3: reg 10: [mem 0xfd780000-0xfd7fffff]
>[    0.205728] pci 0000:00:02.0: reg 10: [mem 0xfd77f000-0xfd77ffff]
>[    0.205757] pci 0000:00:02.0: supports D1 D2
>[    0.205760] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.205764] pci 0000:00:02.0: PME# disabled
>[    0.205789] pci 0000:00:02.1: reg 10: [mem 0xfd77ec00-0xfd77ecff]
>[    0.205823] pci 0000:00:02.1: supports D1 D2
>[    0.205826] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.205830] pci 0000:00:02.1: PME# disabled
>[    0.205861] pci 0000:00:04.0: reg 10: [mem 0xfd77d000-0xfd77dfff]
>[    0.205890] pci 0000:00:04.0: supports D1 D2
>[    0.205893] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.205897] pci 0000:00:04.0: PME# disabled
>[    0.205922] pci 0000:00:04.1: reg 10: [mem 0xfd77e800-0xfd77e8ff]
>[    0.205957] pci 0000:00:04.1: supports D1 D2
>[    0.205959] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.205964] pci 0000:00:04.1: PME# disabled
>[    0.206005] pci 0000:00:06.0: reg 20: [io  0xffa0-0xffaf]
>[    0.206048] pci 0000:00:07.0: reg 10: [mem 0xfd778000-0xfd77bfff]
>[    0.206083] pci 0000:00:07.0: PME# supported from D3hot D3cold
>[    0.206087] pci 0000:00:07.0: PME# disabled
>[    0.206160] pci 0000:00:09.0: reg 10: [io  0xd480-0xd487]
>[    0.206166] pci 0000:00:09.0: reg 14: [io  0xd400-0xd403]
>[    0.206171] pci 0000:00:09.0: reg 18: [io  0xd080-0xd087]
>[    0.206176] pci 0000:00:09.0: reg 1c: [io  0xd000-0xd003]
>[    0.206181] pci 0000:00:09.0: reg 20: [io  0xcc00-0xcc0f]
>[    0.206187] pci 0000:00:09.0: reg 24: [mem 0xfd776000-0xfd777fff]
>[    0.206237] pci 0000:00:0a.0: reg 10: [mem 0xfd77c000-0xfd77cfff]
>[    0.206242] pci 0000:00:0a.0: reg 14: [io  0xc880-0xc887]
>[    0.206248] pci 0000:00:0a.0: reg 18: [mem 0xfd77e400-0xfd77e4ff]
>[    0.206254] pci 0000:00:0a.0: reg 1c: [mem 0xfd77e000-0xfd77e00f]
>[    0.206282] pci 0000:00:0a.0: supports D1 D2
>[    0.206285] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.206291] pci 0000:00:0a.0: PME# disabled
>[    0.206339] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.206343] pci 0000:00:0c.0: PME# disabled
>[    0.206390] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.206394] pci 0000:00:0d.0: PME# disabled
>[    0.206422] pci 0000:00:12.0: reg 10: [mem 0xfc000000-0xfcffffff]
>[    0.206430] pci 0000:00:12.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.206437] pci 0000:00:12.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
>[    0.206445] pci 0000:00:12.0: reg 30: [mem 0xfd740000-0xfd75ffff pref]
>[    0.206604] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
>[    0.206823] pci 0000:00:08.0:   bridge window [io  0xf000-0x0000] (disabled)
>[    0.206828] pci 0000:00:08.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>[    0.206832] pci 0000:00:08.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>[    0.206836] pci 0000:00:08.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.206840] pci 0000:00:08.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.206843] pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.206847] pci 0000:00:08.0:   bridge window [mem 0x40000000-0xdfffffff] (subtractive decode)
>[    0.206850] pci 0000:00:08.0:   bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode)
>[    0.206884] pci 0000:00:0c.0: PCI bridge to [bus 02-04]
>[    0.207105] pci 0000:00:0c.0:   bridge window [io  0xe000-0xefff]
>[    0.207109] pci 0000:00:0c.0:   bridge window [mem 0xfd800000-0xfeafffff]
>[    0.207115] pci 0000:00:0c.0:   bridge window [mem 0xf8000000-0xfaffffff 64bit pref]
>[    0.207176] pci 0000:05:00.0: reg 10: [mem 0xfebf0000-0xfebfffff 64bit]
>[    0.207227] pci 0000:05:00.0: PME# supported from D3hot
>[    0.207233] pci 0000:05:00.0: PME# disabled
>[    0.207253] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.207644] pci 0000:00:0d.0: PCI bridge to [bus 05-05]
>[    0.207869] pci 0000:00:0d.0:   bridge window [io  0xf000-0x0000] (disabled)
>[    0.207873] pci 0000:00:0d.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>[    0.207878] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>[    0.207889] pci_bus 0000:00: on NUMA node 0
>[    0.207896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.208427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>[    0.208525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>[    0.233393] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
>[    0.233393] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
>[    0.233393] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>[    0.234197] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>[    0.235135] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
>[    0.236208] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
>[    0.237141] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
>[    0.238077] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *7
>[    0.238966] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
>[    0.239851] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
>[    0.240730] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
>[    0.241620] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
>[    0.242509] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
>[    0.243408] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
>[    0.244326] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
>[    0.245212] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
>[    0.246149] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>[    0.247086] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *7
>[    0.247974] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *7
>[    0.252031] HEST: Table is not found!
>[    0.252260] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.252421] vgaarb: loaded
>[    0.252671] PCI: Using ACPI for IRQ routing
>[    0.252671] PCI: pci_cache_line_size set to 64 bytes
>[    0.252671] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>[    0.252671] reserve RAM buffer: 0000000037fa8000 - 0000000037ffffff 
>[    0.252671] NetLabel: Initializing
>[    0.252671] NetLabel:  domain hash size = 128
>[    0.252671] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.252750] NetLabel:  unlabeled traffic allowed by default
>[    0.253041] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.256012] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
>[    0.256500] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
>[    0.264037] Switching to clocksource hpet
>[    0.264326] pnp: PnP ACPI init
>[    0.264392] ACPI: bus type pnp registered
>[    0.270366] pnp: PnP ACPI: found 14 devices
>[    0.270659] ACPI: ACPI bus type pnp unregistered
>[    0.270946] PnPBIOS: Disabled by ACPI PNP
>[    0.271248] system 00:06: [io  0x04d0-0x04d1] has been reserved
>[    0.271536] system 00:06: [io  0x0800-0x080f] has been reserved
>[    0.271822] system 00:06: [io  0x0500-0x057f] has been reserved
>[    0.272070] system 00:06: [io  0x0580-0x05ff] has been reserved
>[    0.272298] system 00:06: [io  0x0800-0x087f] could not be reserved
>[    0.272510] system 00:06: [io  0x0880-0x08ff] has been reserved
>[    0.272724] system 00:06: [io  0x0d00-0x0d7f] has been reserved
>[    0.272936] system 00:06: [io  0x0d80-0x0dff] has been reserved
>[    0.273200] system 00:06: [io  0x0900-0x097f] has been reserved
>[    0.273411] system 00:06: [io  0x0980-0x09ff] has been reserved
>[    0.273625] system 00:06: [mem 0x000d0000-0x000d3fff window] could not be reserved
>[    0.273994] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
>[    0.274370] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
>[    0.274741] system 00:06: [mem 0xfefe0000-0xfefe01ff] has been reserved
>[    0.274962] system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
>[    0.275175] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
>[    0.275395] system 00:09: [io  0x0250-0x0253] has been reserved
>[    0.275612] system 00:09: [io  0x0256-0x025f] has been reserved
>[    0.275827] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.276045] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.276278] system 00:0b: [io  0x5000-0x507f] has been reserved
>[    0.276491] system 00:0b: [io  0x5080-0x50ff] has been reserved
>[    0.276710] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.276935] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.277163] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
>[    0.277377] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
>[    0.277599] system 00:0d: [mem 0x00100000-0x3fffffff] could not be reserved
>[    0.277815] system 00:0d: [mem 0xe0000000-0xffffffff] could not be reserved
>[    0.318540] pci 0000:00:08.0: PCI bridge to [bus 01-01]
>[    0.318774] pci 0000:00:08.0:   bridge window [io  disabled]
>[    0.318990] pci 0000:00:08.0:   bridge window [mem disabled]
>[    0.319202] pci 0000:00:08.0:   bridge window [mem pref disabled]
>[    0.319420] pci 0000:00:0c.0: PCI bridge to [bus 02-04]
>[    0.319631] pci 0000:00:0c.0:   bridge window [io  0xe000-0xefff]
>[    0.319844] pci 0000:00:0c.0:   bridge window [mem 0xfd800000-0xfeafffff]
>[    0.320068] pci 0000:00:0c.0:   bridge window [mem 0xf8000000-0xfaffffff 64bit pref]
>[    0.320446] pci 0000:00:0d.0: PCI bridge to [bus 05-05]
>[    0.320661] pci 0000:00:0d.0:   bridge window [io  disabled]
>[    0.320880] pci 0000:00:0d.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>[    0.321110] pci 0000:00:0d.0:   bridge window [mem pref disabled]
>[    0.321334] pci 0000:00:08.0: setting latency timer to 64
>[    0.321342] pci 0000:00:0c.0: setting latency timer to 64
>[    0.321349] pci 0000:00:0d.0: setting latency timer to 64
>[    0.321354] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.321357] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.321361] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.321364] pci_bus 0000:00: resource 7 [mem 0x40000000-0xdfffffff]
>[    0.321368] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed44fff]
>[    0.321371] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
>[    0.321374] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
>[    0.321377] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.321381] pci_bus 0000:01: resource 7 [mem 0x40000000-0xdfffffff]
>[    0.321384] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfed44fff]
>[    0.321387] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
>[    0.321391] pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfeafffff]
>[    0.321394] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xfaffffff 64bit pref]
>[    0.321398] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
>[    0.321500] NET: Registered protocol family 2
>[    0.321809] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>[    0.322442] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.323806] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.324543] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.324773] TCP reno registered
>[    0.324994] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.325250] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.325631] NET: Registered protocol family 1
>[    0.357106] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[    0.357390] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[    0.357686] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[    0.357981] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[    0.358284] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[    0.358507] pci 0000:00:12.0: Boot video device
>[    0.358521] PCI: CLS 64 bytes, default 64
>[    0.358590] Trying to unpack rootfs image as initramfs...
>[    0.426029] Freeing initrd memory: 1908k freed
>[    0.428166] Simple Boot Flag at 0x52 set to 0x1
>[    0.429424] Machine check injector initialized
>[    0.429848] Scanning for low memory corruption every 60 seconds
>[    0.430525] audit: initializing netlink socket (disabled)
>[    0.430761] type=2000 audit(1294774413.428:1): initialized
>[    0.447626] highmem bounce pool size: 64 pages
>[    0.447853] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    0.448405] VFS: Disk quotas dquot_6.5.2
>[    0.448673] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.448979] msgmni has been set to 1730
>[    0.449593] alg: No test for stdrng (krng)
>[    0.449948] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>[    0.450332] io scheduler noop registered (default)
>[    0.450581] io scheduler cfq registered
>[    0.451043] pcieport 0000:00:0c.0: setting latency timer to 64
>[    0.451070]   alloc irq_desc for 40 on node -1
>[    0.451074]   alloc kstat_irqs on node -1
>[    0.451085] pcieport 0000:00:0c.0: irq 40 for MSI/MSI-X
>[    0.451263] pcieport 0000:00:0d.0: setting latency timer to 64
>[    0.451285]   alloc irq_desc for 41 on node -1
>[    0.451288]   alloc kstat_irqs on node -1
>[    0.451295] pcieport 0000:00:0d.0: irq 41 for MSI/MSI-X
>[    0.452159] ERST: Table is not found!
>[    0.452386] isapnp: Scanning for PnP cards...
>[    0.805674] isapnp: No Plug & Play device found
>[    0.875784] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.885038] brd: module loaded
>[    0.885449] Fixed MDIO Bus: probed
>[    0.885865] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>[    0.888239] i8042.c: Detected active multiplexing controller, rev 1.1.
>[    0.889670] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.889890] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    0.890117] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    0.890341] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    0.890563] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    0.891155] mice: PS/2 mouse device common for all mice
>[    0.891631] EISA: Probing bus 0 at eisa.0
>[    0.891849] EISA: Cannot allocate resource for mainboard
>[    0.892281] cpuidle: using governor ladder
>[    0.892496] cpuidle: using governor menu
>[    0.893069] TCP bic registered
>[    0.893385] Using IPI No-Shortcut mode
>[    0.923907] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.080543] registered taskstats version 1
>[    1.081159] Freeing unused kernel memory: 532k freed
>[    1.081882] Write protecting the kernel text: 3036k
>[    1.082187] Write protecting the kernel read-only data: 1344k
>[    1.267652] SCSI subsystem initialized
>[    1.707549] libata version 3.00 loaded.
>[    1.715490] pata_acpi 0000:00:06.0: setting latency timer to 64
>[    1.716072] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
>[    1.716320]   alloc irq_desc for 23 on node -1
>[    1.716323]   alloc kstat_irqs on node -1
>[    1.716338] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>[    1.716795] pata_acpi 0000:00:09.0: setting latency timer to 64
>[    1.716803] pata_acpi 0000:00:09.0: PCI INT A disabled
>[    1.726656] ahci 0000:00:09.0: version 3.0
>[    1.726678] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>[    1.727116] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
>[    1.727345] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
>[    1.727667] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
>[    1.728072] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio 
>[    1.728301] ahci 0000:00:09.0: setting latency timer to 64
>[    1.763692] scsi0 : ahci
>[    1.769962] scsi1 : ahci
>[    1.770311] scsi2 : ahci
>[    1.770617] scsi3 : ahci
>[    1.770989] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
>[    1.771386] ata2: SATA max UDMA/133 abar m8192@0xfd776000 port 0xfd776180 irq 23
>[    1.771782] ata3: SATA max UDMA/133 abar m8192@0xfd776000 port 0xfd776200 irq 23
>[    1.772199] ata4: SATA max UDMA/133 abar m8192@0xfd776000 port 0xfd776280 irq 23
>[    2.113094] ata2: SATA link down (SStatus 0 SControl 300)
>[    2.121098] ata3: SATA link down (SStatus 0 SControl 300)
>[    2.125089] ata4: SATA link down (SStatus 0 SControl 300)
>[    2.504043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    2.504775] ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
>[    2.504998] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
>[    2.505825] ata1.00: configured for UDMA/100
>[    2.506240] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 0000 PQ: 0 ANSI: 5
>[    2.527190] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>[    2.527671] sd 0:0:0:0: [sda] Write Protect is off
>[    2.527912] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.527937] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.528508]  sda: sda1 sda2 sda3 sda4 < sda5 >
>[    2.638341] sd 0:0:0:0: [sda] Attached SCSI disk
>[    3.381931] PM: Starting manual resume from disk
>[    3.443880] EXT3-fs: barriers not enabled
>[    3.456068] kjournald starting.  Commit interval 5 seconds
>[    3.456125] EXT3-fs (sda3): mounted filesystem with writeback data mode
>[    5.842502] ACPI: acpi_idle registered with cpuidle
>[    5.842571] ACPI: processor limited to max C-state 1
>[    5.874116] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 (2 cpu cores) (version 2.20.00)
>[    5.874269] powernow-k8:    0 : fid 0x9 (1700 MHz), vid 0x13
>[    5.874272] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x14
>[    5.874275] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x1a
>[    7.149952] udev[2199]: starting version 165
>[    7.499988] ACPI: AC Adapter [AC0] (on-line)
>[    7.502393] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    7.502404] ACPI: Power Button [PWRB]
>[    7.502473] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>[    7.502479] ACPI: Sleep Button [SLPB]
>[    7.502529] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
>[    7.507024] ACPI: Lid Switch [LID]
>[    7.507115] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    7.507122] ACPI: Power Button [PWRF]
>[    7.540516] ACPI: Battery Slot [BAT0] (battery absent)
>[    7.558079] thermal LNXTHERM:01: registered as thermal_zone0
>[    7.558092] ACPI: Thermal Zone [THRM] (72 C)
>[    7.663213] input: PC Speaker as /devices/platform/pcspkr/input/input5
>[    7.671028] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
>[    7.671570] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
>[    7.671577]   alloc irq_desc for 22 on node -1
>[    7.671579]   alloc kstat_irqs on node -1
>[    7.671594] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
>[    7.671601] forcedeth 0000:00:0a.0: setting latency timer to 64
>[    7.671680] forcedeth 0000:00:0a.0: Invalid Mac address detected: 15:81:57:00:33:26
>[    7.671683] forcedeth 0000:00:0a.0: Please complain to your hardware vendor. Switching to a random MAC.
>[    8.029915] acpi device:1e: registered as cooling_device2
>[    8.030932] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
>[    8.031074] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>[    8.100861] asus_laptop: Asus Laptop Support version 0.42
>[    8.105207] asus_laptop:   F5N model detected
>[    8.107246] asus_laptop: Backlight controlled by ACPI video driver
>[    8.107316] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input7
>[    8.189767] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 56:26:64:d4:f5:78
>[    8.189773] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3
>[    8.189881] i2c i2c-0: nForce2 SMBus adapter at 0x600
>[    8.189910] i2c i2c-1: nForce2 SMBus adapter at 0x700
>[    8.260155] cfg80211: Calling CRDA to update world regulatory domain
>[    8.260170] rtc_cmos 00:08: RTC can wake from S4
>[    8.260364] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>[    8.260416] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
>[    8.425165] usbcore: registered new interface driver usbfs
>[    8.425208] usbcore: registered new interface driver hub
>[    8.432595] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    8.434620] usbcore: registered new device driver usb
>[    8.614147] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0
>[    8.654214] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
>[    8.733878] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    8.734449] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
>[    8.734457]   alloc irq_desc for 21 on node -1
>[    8.734460]   alloc kstat_irqs on node -1
>[    8.734473] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
>[    8.734515] ohci_hcd 0000:00:02.0: setting latency timer to 64
>[    8.734519] ohci_hcd 0000:00:02.0: OHCI Host Controller
>[    8.734557] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>[    8.734594] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfd77f000
>[    8.791052] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>[    8.791058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.791062] usb usb1: Product: OHCI Host Controller
>[    8.791065] usb usb1: Manufacturer: Linux 2.6.35-std-def-alt9 ohci_hcd
>[    8.791067] usb usb1: SerialNumber: 0000:00:02.0
>[    8.791270] hub 1-0:1.0: USB hub found
>[    8.791277] hub 1-0:1.0: 5 ports detected
>[    8.791901] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20
>[    8.791908]   alloc irq_desc for 20 on node -1
>[    8.791911]   alloc kstat_irqs on node -1
>[    8.791924] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20
>[    8.791972] ohci_hcd 0000:00:04.0: setting latency timer to 64
>[    8.791976] ohci_hcd 0000:00:04.0: OHCI Host Controller
>[    8.791991] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
>[    8.792036] ohci_hcd 0000:00:04.0: irq 20, io mem 0xfd77d000
>[    8.838967] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    8.838972] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>[    8.847050] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    8.847056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.847060] usb usb2: Product: OHCI Host Controller
>[    8.847063] usb usb2: Manufacturer: Linux 2.6.35-std-def-alt9 ohci_hcd
>[    8.847066] usb usb2: SerialNumber: 0000:00:04.0
>[    8.847283] hub 2-0:1.0: USB hub found
>[    8.847290] hub 2-0:1.0: 5 ports detected
>[    8.847401] pata_amd 0000:00:06.0: version 0.4.1
>[    8.847484] pata_amd 0000:00:06.0: setting latency timer to 64
>[    8.848043] scsi4 : pata_amd
>[    8.848166] scsi5 : pata_amd
>[    8.849663] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>[    8.849667] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>[    8.850227] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
>[    8.850234] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
>[    8.850289] ehci_hcd 0000:00:02.1: setting latency timer to 64
>[    8.850294] ehci_hcd 0000:00:02.1: EHCI Host Controller
>[    8.850326] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>[    8.850361] ehci_hcd 0000:00:02.1: debug port 1
>[    8.850371] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
>[    8.850385] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfd77ec00
>[    8.860034] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
>[    8.860071] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    8.860075] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.860078] usb usb3: Product: EHCI Host Controller
>[    8.860081] usb usb3: Manufacturer: Linux 2.6.35-std-def-alt9 ehci_hcd
>[    8.860084] usb usb3: SerialNumber: 0000:00:02.1
>[    8.860294] hub 3-0:1.0: USB hub found
>[    8.860300] hub 3-0:1.0: 5 ports detected
>[    8.860899] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 22
>[    8.860906] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22
>[    8.860956] ehci_hcd 0000:00:04.1: setting latency timer to 64
>[    8.860960] ehci_hcd 0000:00:04.1: EHCI Host Controller
>[    8.860973] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
>[    8.861010] ehci_hcd 0000:00:04.1: debug port 1
>[    8.861022] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
>[    8.861052] ehci_hcd 0000:00:04.1: irq 22, io mem 0xfd77e800
>[    8.876045] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
>[    8.876086] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
>[    8.876089] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.876093] usb usb4: Product: EHCI Host Controller
>[    8.876096] usb usb4: Manufacturer: Linux 2.6.35-std-def-alt9 ehci_hcd
>[    8.876099] usb usb4: SerialNumber: 0000:00:04.1
>[    8.876309] hub 4-0:1.0: USB hub found
>[    8.876315] hub 4-0:1.0: 5 ports detected
>[    9.013489] ata5.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.21, max UDMA/33
>[    9.013522] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
>[    9.028463] ata5.00: configured for UDMA/33
>[    9.030707] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.21 PQ: 0 ANSI: 5
>[    9.030971] scsi 4:0:0:0: Attached scsi generic sg1 type 5
>[    9.031080] ata6: port disabled. ignoring.
>[    9.150669] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
>[    9.150677]   alloc irq_desc for 19 on node -1
>[    9.150680]   alloc kstat_irqs on node -1
>[    9.150693] ath5k 0000:05:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
>[    9.150704] ath5k 0000:05:00.0: setting latency timer to 64
>[    9.150780] ath5k 0000:05:00.0: registered as 'phy0'
>[    9.160909] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
>[    9.160919] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
>[    9.160926] hda_intel: Disable MSI for Nvidia chipset
>[    9.160991] HDA Intel 0000:00:07.0: setting latency timer to 64
>[    9.173039] usb 3-3: new high speed USB device using ehci_hcd and address 2
>[    9.305789] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    9.305796] Uniform CD-ROM driver Revision: 3.20
>[    9.305926] sr 4:0:0:0: Attached scsi CD-ROM sr0
>[    9.325295] usb 3-3: New USB device found, idVendor=0bda, idProduct=0116
>[    9.325301] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    9.325304] usb 3-3: Product: USB2.0-CRW
>[    9.325307] usb 3-3: Manufacturer: Generic
>[    9.325310] usb 3-3: SerialNumber: 20021111153705700
>[    9.513835] usbcore: registered new interface driver libusual
>[    9.526805] Initializing USB Mass Storage driver...
>[    9.527498] scsi6 : usb-storage 3-3:1.0
>[    9.528966] usbcore: registered new interface driver usb-storage
>[    9.528971] USB Mass Storage support registered.
>[    9.656466] ath: EEPROM regdomain: 0x60
>[    9.656469] ath: EEPROM indicates we should expect a direct regpair map
>[    9.656475] ath: Country alpha2 being used: 00
>[    9.656478] ath: Regpair used: 0x60
>[    9.789328] phy0: Selected rate control algorithm 'minstrel'
>[    9.789707] Registered led device: ath5k-phy0::rx
>[    9.789728] Registered led device: ath5k-phy0::tx
>[    9.789733] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
>[   10.282024] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input9
>[   10.534216] scsi 6:0:0:0: Direct-Access     Generic- xD/SDMMC/MS/Pro  1.00 PQ: 0 ANSI: 0 CCS
>[   10.534539] sd 6:0:0:0: Attached scsi generic sg2 type 0
>[   10.538961] sd 6:0:0:0: [sdb] Attached SCSI removable disk
>[   11.140962] Adding 2096444k swap on /dev/sda1.  Priority:-1 extents:1 across:2096444k 
>[   11.502782] EXT3-fs (sda3): using internal journal
>[   16.990443] device-mapper: uevent: version 1.0.3
>[   16.990676] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
>[   18.048946] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.048952] device-mapper: ioctl: error adding target to table
>[   18.065771] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.065777] device-mapper: ioctl: error adding target to table
>[   18.077703] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.077709] device-mapper: ioctl: error adding target to table
>[   18.089698] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.089704] device-mapper: ioctl: error adding target to table
>[   18.101729] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.101736] device-mapper: ioctl: error adding target to table
>[   18.113876] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.113883] device-mapper: ioctl: error adding target to table
>[   18.124751] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.124759] device-mapper: ioctl: error adding target to table
>[   18.141904] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.141910] device-mapper: ioctl: error adding target to table
>[   18.153935] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.153942] device-mapper: ioctl: error adding target to table
>[   18.166185] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.166192] device-mapper: ioctl: error adding target to table
>[   18.176525] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.176530] device-mapper: ioctl: error adding target to table
>[   18.188608] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.188614] device-mapper: ioctl: error adding target to table
>[   18.200615] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.200621] device-mapper: ioctl: error adding target to table
>[   18.212737] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.212744] device-mapper: ioctl: error adding target to table
>[   18.221582] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.221587] device-mapper: ioctl: error adding target to table
>[   18.233581] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>[   18.233586] device-mapper: ioctl: error adding target to table
>[   18.542272] fuse init (API version 7.14)
>[   30.846821] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   35.768754] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>[   47.500929] Linux agpgart interface v0.103
>[   48.464982] nvidia: module license 'NVIDIA' taints kernel.
>[   48.464991] Disabling lock debugging due to kernel taint
>[   50.092638] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
>[   50.092649] nvidia 0000:00:12.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
>[   50.092660] nvidia 0000:00:12.0: setting latency timer to 64
>[   50.092667] vgaarb: device changed decodes: PCI:0000:00:12.0,olddecodes=io+mem,decodes=none:owns=io+mem
>[   50.092993] NVRM: loading NVIDIA UNIX x86 Kernel Module  260.19.21  Thu Nov  4 20:24:24 PDT 2010
>[  464.170395] NET: Registered protocol family 17
>[  465.423765] wlan0: authenticate with 1c:bd:b9:b7:99:4a (try 1)
>[  465.425245] wlan0: authenticated
>[  465.425312] wlan0: associate with 1c:bd:b9:b7:99:4a (try 1)
>[  465.430623] wlan0: RX AssocResp from 1c:bd:b9:b7:99:4a (capab=0xc31 status=0 aid=1)
>[  465.430627] wlan0: associated
>[  465.431519] cfg80211: Calling CRDA for country: GB
>[  465.669167] padlock: VIA PadLock not detected.
>[  549.160037] wlan0: deauthenticating from 1c:bd:b9:b7:99:4a by local choice (reason=3)
>[  549.176065] cfg80211: Calling CRDA to update world regulatory domain
>[  599.428107] ata1.00: configured for UDMA/100
>[  599.428115] ata1: EH complete
>[  599.428328] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[  744.179574]   alloc irq_desc for 42 on node -1
>[  744.179581]   alloc kstat_irqs on node -1
>[  744.179596] forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X
>[  744.179808] eth0: no link during initialization.
>[  744.713403] forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X
>[  744.713609] eth0: no link during initialization.
>[  870.845218] wlan0: authenticate with 1c:bd:b9:b7:99:4a (try 1)
>[  870.846000] wlan0: authenticated
>[  870.846061] wlan0: associate with 1c:bd:b9:b7:99:4a (try 1)
>[  870.850368] wlan0: RX AssocResp from 1c:bd:b9:b7:99:4a (capab=0xc31 status=0 aid=1)
>[  870.850376] wlan0: associated
>[  970.362173] ata1.00: configured for UDMA/100
>[  970.362181] ata1: EH complete
>[  970.379099] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[  973.211136] PM: Syncing filesystems ... done.
>[  973.212757] Freezing user space processes ... (elapsed 0.06 seconds) done.
>[  973.277155] Freezing remaining freezable tasks ... (elapsed 0.04 seconds) done.
>[  973.324239] Suspending console(s) (use no_console_suspend to debug)
>[  973.341592] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  973.388682] forcedeth 0000:00:0a.0: PME# enabled
>[  973.388695] forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI
>[  973.388702] forcedeth 0000:00:0a.0: PCI INT A disabled
>[  973.388797] ehci_hcd 0000:00:04.1: PCI INT B disabled
>[  973.388806] ohci_hcd 0000:00:04.0: PCI INT A disabled
>[  973.388818] ehci_hcd 0000:00:02.1: PCI INT B disabled
>[  973.388825] ohci_hcd 0000:00:02.0: PCI INT A disabled
>[  973.500261] sd 0:0:0:0: [sda] Stopping disk
>[  973.701028] HDA Intel 0000:00:07.0: PCI INT A disabled
>[  974.517128] ahci 0000:00:09.0: PCI INT A disabled
>[  974.664709] PM: suspend of devices complete after 1339.882 msecs
>[  974.744164] PM: late suspend of devices complete after 79.448 msecs
>[  974.744243] ACPI: Preparing to enter system sleep state S3
>[  974.847213] PM: Saving platform NVS memory
>[  974.855206] Disabling non-boot CPUs ...
>[  974.960035] CPU 1 is now offline
>[  974.960040] SMP alternatives: switching to UP code
>[  974.966327] Back to C!
>[  974.966327] PM: Restoring platform NVS memory
>[  974.970224] Enabling non-boot CPUs ...
>[  974.970536] SMP alternatives: switching to SMP code
>[  974.975538] Booting Node 0 Processor 1 APIC 0x1
>[  974.965496] Initializing CPU#1
>[  975.064045] Switch to broadcast mode on CPU1
>[  975.080446] CPU1 is up
>[  975.080858] ACPI: Waking up from system sleep state S3
>[  975.300561] ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00002, writing 0xb00003)
>[  975.300617] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00002, writing 0xb00003)
>[  975.300669] pata_amd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
>[  975.300760] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[  975.300838] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[  975.300855] ahci 0000:00:09.0: restoring config space at offset 0x1 (was 0xb00103, writing 0xb00107)
>[  975.300880] forcedeth 0000:00:0a.0: restoring config space at offset 0x7 (was 0x0, writing 0xfd77e000)
>[  975.300885] forcedeth 0000:00:0a.0: restoring config space at offset 0x6 (was 0x0, writing 0xfd77e400)
>[  975.300892] forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
>[  975.300972] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[  975.301081] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[  975.301097] pcieport 0000:00:0d.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
>[  975.301197] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[  975.301260] ath5k 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
>[  975.301277] ath5k 0000:05:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfebf0004)
>[  975.301282] ath5k 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  975.301289] ath5k 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
>[  975.301444] PM: early resume of devices complete after 1.106 msecs
>[  975.301627] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
>[  975.301636] ohci_hcd 0000:00:02.0: setting latency timer to 64
>[  975.301656] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
>[  975.301661] ehci_hcd 0000:00:02.1: setting latency timer to 64
>[  975.301682] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20
>[  975.301687] ohci_hcd 0000:00:04.0: setting latency timer to 64
>[  975.301701] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22
>[  975.301706] ehci_hcd 0000:00:04.1: setting latency timer to 64
>[  975.301730] pata_amd 0000:00:06.0: setting latency timer to 64
>[  975.301757] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
>[  975.301762] HDA Intel 0000:00:07.0: setting latency timer to 64
>[  975.301793] pci 0000:00:08.0: setting latency timer to 64
>[  975.301804] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>[  975.301808] ahci 0000:00:09.0: setting latency timer to 64
>[  975.302025] sd 0:0:0:0: [sda] Starting disk
>[  975.305114] forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
>[  975.305122] forcedeth 0000:00:0a.0: PME# disabled
>[  975.308757] ata6: port disabled. ignoring.
>[  975.473487] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[  975.473493] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
>[  975.473497] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[  975.473534] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
>[  975.489403] ata5.00: configured for UDMA/33
>[  975.621027] ata2: SATA link down (SStatus 0 SControl 300)
>[  975.621044] ata4: SATA link down (SStatus 0 SControl 300)
>[  975.621057] ata3: SATA link down (SStatus 0 SControl 300)
>[  975.826073] forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X
>[  975.826270] eth0: no link during initialization.
>[  976.405072] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  976.569152] ata1.00: configured for UDMA/100
>[  976.612140] PM: resume of devices complete after 1310.582 msecs
>[  976.612805] Restarting tasks ... done.
>[  976.619457] video LNXVIDEO:00: Restoring backlight state
>[  979.012506] ata1.00: configured for UDMA/100
>[  979.012513] ata1: EH complete
>[ 1016.931011] CE: hpet increased min_delta_ns to 7500 nsec
>[ 1512.883529] ata1.00: configured for UDMA/100
>[ 1512.883537] ata1: EH complete
>[ 1517.083425] PM: Syncing filesystems ... done.
>[ 1517.084376] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[ 1517.117152] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 1517.132274] Suspending console(s) (use no_console_suspend to debug)
>[ 1517.149276] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 1517.196176] forcedeth 0000:00:0a.0: PME# enabled
>[ 1517.196192] forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI
>[ 1517.196232] HDA Intel 0000:00:07.0: PCI INT A disabled
>[ 1517.196362] ehci_hcd 0000:00:04.1: PCI INT B disabled
>[ 1517.196372] ohci_hcd 0000:00:04.0: PCI INT A disabled
>[ 1517.196387] ehci_hcd 0000:00:02.1: PCI INT B disabled
>[ 1517.196396] ohci_hcd 0000:00:02.0: PCI INT A disabled
>[ 1517.292438] sd 0:0:0:0: [sda] Stopping disk
>[ 1518.308203] ahci 0000:00:09.0: PCI INT A disabled
>[ 1518.324070] PM: suspend of devices complete after 1191.160 msecs
>[ 1518.404172] PM: late suspend of devices complete after 80.096 msecs
>[ 1518.404251] ACPI: Preparing to enter system sleep state S3
>[ 1518.507215] PM: Saving platform NVS memory
>[ 1518.515362] Disabling non-boot CPUs ...
>[ 1518.620034] CPU 1 is now offline
>[ 1518.620037] SMP alternatives: switching to UP code
>[ 1518.626239] Back to C!
>[ 1518.626239] PM: Restoring platform NVS memory
>[ 1518.630290] Enabling non-boot CPUs ...
>[ 1518.630606] SMP alternatives: switching to SMP code
>[ 1518.635530] Booting Node 0 Processor 1 APIC 0x1
>[ 1518.625433] Initializing CPU#1
>[ 1518.625433] Switch to broadcast mode on CPU1
>[ 1518.740441] CPU1 is up
>[ 1518.740882] ACPI: Waking up from system sleep state S3
>[ 1518.960564] ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00002, writing 0xb00003)
>[ 1518.960619] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00002, writing 0xb00003)
>[ 1518.960672] pata_amd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
>[ 1518.960763] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[ 1518.960841] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[ 1518.960858] ahci 0000:00:09.0: restoring config space at offset 0x1 (was 0xb00103, writing 0xb00107)
>[ 1518.960883] forcedeth 0000:00:0a.0: restoring config space at offset 0x7 (was 0x0, writing 0xfd77e000)
>[ 1518.960888] forcedeth 0000:00:0a.0: restoring config space at offset 0x6 (was 0x0, writing 0xfd77e400)
>[ 1518.960970] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[ 1518.961077] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[ 1518.961189] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[ 1518.961251] ath5k 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
>[ 1518.961268] ath5k 0000:05:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfebf0004)
>[ 1518.961274] ath5k 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[ 1518.961281] ath5k 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
>[ 1518.961436] PM: early resume of devices complete after 1.094 msecs
>[ 1518.961713] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
>[ 1518.961721] ohci_hcd 0000:00:02.0: setting latency timer to 64
>[ 1518.961747] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
>[ 1518.961752] ehci_hcd 0000:00:02.1: setting latency timer to 64
>[ 1518.961773] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20
>[ 1518.961778] ohci_hcd 0000:00:04.0: setting latency timer to 64
>[ 1518.962506] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22
>[ 1518.962515] ehci_hcd 0000:00:04.1: setting latency timer to 64
>[ 1518.962521] pata_amd 0000:00:06.0: setting latency timer to 64
>[ 1518.962561] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
>[ 1518.962566] HDA Intel 0000:00:07.0: setting latency timer to 64
>[ 1518.962574] pci 0000:00:08.0: setting latency timer to 64
>[ 1518.962773] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>[ 1518.962778] ahci 0000:00:09.0: setting latency timer to 64
>[ 1518.962844] sd 0:0:0:0: [sda] Starting disk
>[ 1518.962939] forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
>[ 1518.962945] forcedeth 0000:00:0a.0: PME# disabled
>[ 1518.966983] ata6: port disabled. ignoring.
>[ 1519.128566] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[ 1519.128572] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
>[ 1519.128577] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[ 1519.128615] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
>[ 1519.144494] ata5.00: configured for UDMA/33
>[ 1519.280044] ata2: SATA link down (SStatus 0 SControl 300)
>[ 1519.280063] ata4: SATA link down (SStatus 0 SControl 300)
>[ 1519.280077] ata3: SATA link down (SStatus 0 SControl 300)
>[ 1519.481352] forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X
>[ 1519.481555] eth0: no link during initialization.
>[ 1520.512042] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 1520.513578] ata1.00: configured for UDMA/100
>[ 1520.544155] PM: resume of devices complete after 1582.605 msecs
>[ 1520.544825] Restarting tasks ... done.
>[ 1520.552603] video LNXVIDEO:00: Restoring backlight state
>[ 1522.973507] ata1.00: configured for UDMA/100
>[ 1522.973515] ata1: EH complete
>[ 1589.264151] ata1.00: configured for UDMA/100
>[ 1589.264159] ata1: EH complete
>[ 1591.067073] PM: Syncing filesystems ... done.
>[ 1591.068077] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 1591.085193] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 1591.101264] PM: Preallocating image memory... done (allocated 114403 pages)
>[ 1599.273823] PM: Allocated 457612 kbytes in 8.17 seconds (56.01 MB/s)
>[ 1599.273827] Suspending console(s) (use no_console_suspend to debug)
>[ 1599.294560] forcedeth 0000:00:0a.0: PME# enabled
>[ 1599.294575] forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI
>[ 1599.294657] HDA Intel 0000:00:07.0: PCI INT A disabled
>[ 1599.294767] ata6: port disabled. ignoring.
>[ 1599.700040] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 1599.765187] ahci 0000:00:09.0: PCI INT A disabled
>[ 1599.765224] PM: freeze of devices complete after 490.793 msecs
>[ 1599.765697] PM: late freeze of devices complete after 0.467 msecs
>[ 1599.765776] ACPI: Preparing to enter system sleep state S4
>[ 1599.814321] PM: Saving platform NVS memory
>[ 1599.822700] PM: Saving platform NVS memory
>[ 1599.831256] Disabling non-boot CPUs ...
>[ 1599.845276] CPU 1 is now offline
>[ 1599.845282] SMP alternatives: switching to UP code
>[ 1599.851426] PM: Creating hibernation image:
>[ 1599.852010] PM: Need to copy 112752 pages
>[ 1599.852010] PM: Restoring platform NVS memory
>[ 1599.855195] Enabling non-boot CPUs ...
>[ 1599.855522] SMP alternatives: switching to SMP code
>[ 1599.860459] Booting Node 0 Processor 1 APIC 0x1
>[ 1599.850700] Initializing CPU#1
>[ 1599.850700] Switch to broadcast mode on CPU1
>[ 1599.964441] CPU1 is up
>[ 1599.964945] ACPI: Waking up from system sleep state S4
>[ 1600.136659] pata_amd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
>[ 1600.136689] HDA Intel 0000:00:07.0: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
>[ 1600.136757] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[ 1600.136835] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[ 1600.136852] ahci 0000:00:09.0: restoring config space at offset 0x1 (was 0xb00103, writing 0xb00107)
>[ 1600.136956] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[ 1600.137076] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[ 1600.137093] pcieport 0000:00:0d.0: restoring config space at offset 0x7 (was 0x200001f1, writing 0x1f1)
>[ 1600.137193] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[ 1600.137203] nvidia 0000:00:12.0: restoring config space at offset 0xc (was 0xfd740000, writing 0x0)
>[ 1600.137425] PM: early restore of devices complete after 1.088 msecs
>[ 1600.182063] ohci_hcd 0000:00:02.0: setting latency timer to 64
>[ 1600.182133] ehci_hcd 0000:00:02.1: setting latency timer to 64
>[ 1600.182205] ohci_hcd 0000:00:04.0: setting latency timer to 64
>[ 1600.182258] ehci_hcd 0000:00:04.1: setting latency timer to 64
>[ 1600.182348] pata_amd 0000:00:06.0: setting latency timer to 64
>[ 1600.182382] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
>[ 1600.182387] HDA Intel 0000:00:07.0: setting latency timer to 64
>[ 1600.182417] pci 0000:00:08.0: setting latency timer to 64
>[ 1600.182429] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>[ 1600.182433] ahci 0000:00:09.0: setting latency timer to 64
>[ 1600.182474] forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
>[ 1600.182480] forcedeth 0000:00:0a.0: PME# disabled
>[ 1600.183178] sd 0:0:0:0: [sda] Starting disk
>[ 1600.188105] ata6: port disabled. ignoring.
>[ 1600.237031] usb usb2: root hub lost power or was reset
>[ 1600.237054] usb usb1: root hub lost power or was reset
>[ 1600.237081] usb usb4: root hub lost power or was reset
>[ 1600.237092] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
>[ 1600.237116] usb usb3: root hub lost power or was reset
>[ 1600.237123] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
>[ 1600.353442] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[ 1600.353447] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
>[ 1600.353452] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[ 1600.353488] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
>[ 1600.369450] ata5.00: configured for UDMA/33
>[ 1600.501027] ata3: SATA link down (SStatus 0 SControl 300)
>[ 1600.501044] ata4: SATA link down (SStatus 0 SControl 300)
>[ 1600.501058] ata2: SATA link down (SStatus 0 SControl 300)
>[ 1600.501074] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 1600.502160] ata1.00: configured for UDMA/100
>[ 1600.585032] usb 3-3: reset high speed USB device using ehci_hcd and address 2
>[ 1600.702079] forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X
>[ 1600.702276] eth0: no link during initialization.
>[ 1600.756938] ath5k phy0: gain calibration timeout (2452MHz)
>[ 1600.787176] ath5k phy0: gain calibration timeout (2452MHz)
>[ 1601.308377] PM: restore of devices complete after 1126.892 msecs
>[ 1601.309424] Restarting tasks ... done.
>[ 1601.310292] video LNXVIDEO:00: Restoring backlight state
>[ 1624.274087] ata1.00: configured for UDMA/100
>[ 1624.274096] ata1: EH complete

Actions: View

Attachments on bug 24896: 4745 | 4746 | 4747 | 4868