Attachment 4758 Details for Bug 24923 – xorg.conf

xorg.conf

xorg.conf (text/plain), 8.27 KB, created by serpiph on 2011-01-16 13:52:27 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: serpiph

Created: 2011-01-16 13:52:27 MSK

Size: 8.27 KB

patch

obsolete

># **********************************************************************
># Refer to the XF86Config(4/5) man page for details about the format of
># this file.
># **********************************************************************
>
>Section "Files"
>
>#    RgbPath	"/usr/share/X11/rgb"
>
>### Multiple FontPath entries are allowed (they are concatenated together)
># By default, Mandrake 6.0 and later now use a font server independent of
># the X server to render fonts.
>
>##    FontPath   "unix/:-1"
>
>EndSection
>
># **********************************************************************
># Server flags section.
># **********************************************************************
>
>Section "ServerFlags"
>
>    # Uncomment this to cause a core dump at the spot where a signal is
>    # received.  This may leave the console in an unusable state, but may
>    # provide a better stack trace in the core dump to aid in debugging
>    #NoTrapSignals
>
>    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
>    # This allows clients to receive this key event.
>    #DontZap
>
>    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
>    # sequences.  This allows clients to receive these key events.
>    #DontZoom
>
>    # This  allows  the  server  to start up even if the
>    # mouse device can't be opened/initialised.
>#    Option "AllowMouseOpenFail" "yes"
>
>    Option "Xinerama" "yes"
>
>    Option "AutoAddDevices" "yes"
>    Option "AutoEnableDevices" "yes"
>    Option "IgnoreABI" "on"
>    Option "GlxVisuals" "all"
>
>EndSection
>
># **********************************************************************
># Input devices
># **********************************************************************
>
># **********************************************************************
># Keyboard section
># **********************************************************************
>
>#Section "InputDevice"
>#
>#    Identifier "Keyboard1"
>#    Driver      "kbd"
>#    Option "AutoRepeat"  "250 30"
>#
>#    Option "XkbModel" "pc105"
>#    Option "XkbLayout" "us,ru(winkeys)"
>#    Option "XkbOptions"  "grp:ctrl_shift_toggle,grp:switch,compose:rwin"
>#    Option   "CoreKeyboard" "yes"
>#
>#EndSection
>
># **********************************************************************
># Pointer section
># **********************************************************************
>
>#Section "InputDevice"
>#
>#    Identifier  "Mouse1"
>#    Driver      "mouse"
>#    Option "Protocol"    "IMPS/2"
>#    Option "Device"      "/dev/input/mice"
>#    Option "ZAxisMapping" "4 5"
>#
>#EndSection
>
>Section "Module"
>
># This loads the DBE extension module.
>
>    Load	"dbe"
>
># This loads the Video for Linux module.
>    Load        "v4l"
>
>
># This loads the miscellaneous extensions module, and disables
># initialisation of the XFree86-DGA extension within that module.
>
>    SubSection	"extmod"
>#TEST
>#	Option	"omit xfree86-dga"
>
>    EndSubSection
>
># This loads the Type1 and FreeType font modules
>
>#    Load	"freetype"
>    Load	"dri"
>    Load	"glx"
>#    Load	"fi1236"
>#    Load	"randr"
>EndSection
>
>Section "DRI"
>    Mode	0666
>EndSection
>
># **********************************************************************
># Monitor section
># **********************************************************************
>
># Any number of monitor sections may be present
>
>Section "Monitor"
>    Identifier "monitor1"
>    VendorName "NEC"
>    ModelName  "2190UXi"
>    Option     "DPMS"
>
>
># HorizSync is in kHz unless units are specified.
># HorizSync may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>    HorizSync  30-80
>
>
># VertRefresh is in Hz unless units are specified.
># VertRefresh may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>    VertRefresh 50-75
>    Option "PreferredMode" "1600x1200"
>EndSection
>
>Section "Monitor"
>    Identifier "monitor2"
>    VendorName "AG Neovo"
>    ModelName  "X17AV"
>    Option     "DPMS"
>    Option     "LeftOf" "monitor1"
>    Option "PreferredMode" "1280x1024"
>
>
># HorizSync is in kHz unless units are specified.
># HorizSync may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>    HorizSync  30-80
>
>
># VertRefresh is in Hz unless units are specified.
># VertRefresh may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>    VertRefresh 50-75
>EndSection
>
>
># **********************************************************************
># Graphics device section
># **********************************************************************
>
>Section "Device"
>    Identifier	"ATI Radeon"
>    VendorName	"Sapphire"
>    BoardName	"HD6970"
>    Driver	"vesa"
>#    Driver	"radeon"
>#    Driver	"ati"
>#    Option	"AccelMethod"	"exa"
>    Option	"monitor-DVI-0" "monitor2"
>    Option	"monitor-DVI-1" "monitor1"
>Option	"DRI"	"on"
>    BusID       "PCI:2:0:0"
>#    Screen 0
>EndSection
>
>#Section "Device"
>#    Identifier	"ATI Radeon2"
>#    VendorName	"Sapphire"
>#    BoardName	"HD4870"
>#    Driver	"radeon"
>#    Option	"DRI"	"on"
>#    BusID       "PCI:2:0:0"
>#    Option	"monitor-DVI-0" "monitor2"
>#    Screen 1
>#EndSection
>
>Section "Screen"
>    Identifier "screen1"
>    Device      "ATI Radeon"
>    Monitor     "monitor1"
>    DefaultColorDepth 24
>    Option	"Accel"
>    Subsection "Display"
>        Depth       8
>        Modes       "1600x1200" "1280x1024" "1024x768" "800x600" "640x400"
>#        ViewPort    0 0
>#        Virtual     2880 1200
>    EndSubsection
>    Subsection "Display"
>        Depth       15
>        Modes       "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
>#        ViewPort    0 0
>#        Virtual     2880 1200
>    EndSubsection
>    Subsection "Display"
>        Depth       16
>        Modes       "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
>#        ViewPort    0 0
>#        Virtual     2880 1200
>    EndSubsection
>    Subsection "Display"
>        Depth       24
>        Modes       "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
>#        ViewPort    0 0
>#        Virtual     2880 1200
>    EndSubsection
>    Subsection "Display"
>        Depth       32
>        Modes       "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
>#        ViewPort    0 0
>#        Virtual     2880 1200
>    EndSubsection
>EndSection
>
>Section "Screen"
>    Identifier "screen2"
>    Device      "ATI Radeon2"
>    Monitor     "monitor2"
>    DefaultColorDepth 24
>    Option	"Accel"
>    Subsection "Display"
>        Depth       8
>        Modes       "1280x1024" "1024x768" "800x600" "640x400"
>#        ViewPort    0 0
>#        ViewPort    1600 0
>#        Virtual     2880 1200
>    EndSubsection
>    Subsection "Display"
>        Depth       15
>        Modes       "1280x1024" "1024x768" "800x600" "640x480"
>#        ViewPort    0 0
>#        ViewPort    1600 0
>#        Virtual     2880 1200
>    EndSubsection
>    Subsection "Display"
>        Depth       16
>        Modes       "1280x1024" "1024x768" "800x600" "640x480"
>#        ViewPort    0 0
>#        ViewPort    1600 0
>#        Virtual     2880 1200
>    EndSubsection
>    Subsection "Display"
>        Depth       24
>        Modes       "1280x1024" "1024x768" "800x600" "640x480"
>#        ViewPort    0 0
>#        ViewPort    1600 0
>#        Virtual     2880 1200
>    EndSubsection
>    Subsection "Display"
>        Depth       32
>        Modes       "1280x1024" "1024x768" "800x600" "640x480"
>#        ViewPort    0 0
>#        ViewPort    1600 0
>#        Virtual     2880 1200
>    EndSubsection
>EndSection
>
>Section "ServerLayout"
>    Identifier   "layout1"
>    Screen     0 "screen1" 0 0
>#    Screen     1 "screen2" 1600 0
>#    Screen     1 "screen2" RightOf "screen1"
>#    Screen       "aticonfig-Screen[0]-1" RightOf "screen1"
>#    InputDevice "stylus" "SendCoreEvents"
>#    InputDevice "eraser" "SendCoreEvents"
>#    InputDevice "cursor" "SendCoreEvents"
>#    InputDevice "touch" "SendCoreEvents"
>#    InputDevice "pad"
>EndSection
>
>Section "Extensions"
>#    Option "DAMAGE" "true"
>#    Option "Composite" "true"
>EndSection

Actions: View

Attachments on bug 24923: 4758 | 4759 | 4760