Attachment 7984 Details for Bug 36012 – Лог dmesg из системы с рабочей графикой

Лог dmesg из системы с рабочей графикой

dmesg (text/plain), 56.72 KB, created by Alexey on 2019-02-01 15:39:55 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Alexey

Created: 2019-02-01 15:39:55 MSK

Size: 56.72 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 4.4.135-cpc313 (root@cpc516) (gcc version 4.9.2 (Debian 4.9.2-10) ) #19 SMP Sat Dec 29 15:20:07 UTC 2018
>[    0.000000] Enable data prefetch
>[    0.000000] Enable instruction prefetch
>[    0.000000] bootconsole [early0] enabled
>[    0.000000] CPU0 revision is: 0001a830 (MIPS P5600)
>[    0.000000] FPU revision is: 30f30320
>[    0.000000] MSA revision is: 00000320
>[    0.000000] Machine device tree at: 0x87df5000
>[    0.000000] Determined physical RAM map:
>[    0.000000]  memory: 08000000 @ 00000000 (usable)
>[    0.000000]  memory: c0000000 @ 20000000 (usable)
>[    0.000000] Initial ramdisk at: 0x86000000 (3298306 bytes)
>[    0.000000] MIPS: machine is Baikal-T1 Fastwel CPC313 Board
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000001ffffff]
>[    0.000000]   Normal   [mem 0x0000000002000000-0x000000001fffffff]
>[    0.000000]   HighMem  [mem 0x0000000020000000-0x00000000dfffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
>[    0.000000]   node   0: [mem 0x0000000020000000-0x00000000dfffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000dfffffff]
>[    0.000000] On node 0 totalpages: 204800
>[    0.000000] free_area_init_node: node 0, pgdat 80ab9380, node_mem_map 82018000
>[    0.000000]   DMA zone: 5 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 2048 pages, LIFO batch:0
>[    0.000000]   Normal zone: 68 pages used for memmap
>[    0.000000]   Normal zone: 6144 pages, LIFO batch:0
>[    0.000000]   HighMem zone: 196608 pages, LIFO batch:7
>[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
>[    0.000000] VPE topology {1,1} total 2
>[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
>[    0.000000] Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 bytes
>[    0.000000] MIPS secondary cache 1024kB, 8-way, linesize 32 bytes.
>[    0.000000] PERCPU: Embedded 3 pages/cpu @82804000 s14176 r8192 d26784 u49152
>[    0.000000] pcpu-alloc: s14176 r8192 d26784 u49152 alloc=3*16384
>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 204727
>[    0.000000] Kernel command line: root=/dev/sda1 rw rootwait libata.force=2:1.5Gbps console=ttyS0,115200n8 console=tty0 earlyprintk=uart8250,mmio32,0x1F04A000,115200 maxcpus=2 nohtw board_name=Fastwel CPC313 board_serial=0 board_rev=0.0 kgdboc=ttyS0
>[    0.000000] PID hash table entries: 512 (order: -3, 2048 bytes)
>[    0.000000] Dentry cache hash table entries: 16384 (order: 2, 65536 bytes)
>[    0.000000] Inode-cache hash table entries: 8192 (order: 1, 32768 bytes)
>[    0.000000] Extended Physical Addressing (XPA) enabled
>[    0.000000] Writing ErrCtl register=80000ff0
>[    0.000000] Readback ErrCtl register=80000ff0
>[    0.000000] Cache parity protection enabled
>[    0.000000] L2 cache parity protection enabled
>[    0.000000] MAAR configuration:
>[    0.000000]   [0]: 0x0000000000000000-0x0000000007ffffff speculate maarvh = 0x80000000
>[    0.000000]   [1]: 0x0000000020000000-0x00000000dfffffff speculate maarvh = 0x80000000
>[    0.000000]   [2]: disabled
>[    0.000000] Memory: 3253392K/3276800K available (8073K kernel code, 328K rwdata, 1588K rodata, 304K init, 368K bss, 23408K reserved, 0K cma-reserved, 3145728K highmem)
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] NR_IRQS:255
>[    0.000000] 	Offload RCU callbacks from all CPUs
>[    0.000000] 	Offload RCU callbacks from CPUs: 0-1.
>[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0x114c1bbbeec, max_idle_ns: 440795229572 ns
>[    0.000000] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
>[    0.000004] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
>[    0.008663] CPU timer frequency: 1200 MHz
>[    0.013367] Console: colour dummy device 80x25
>[    0.018181] console [tty0] enabled
>[    0.021924] bootconsole [early0] disabled
>[    0.026380] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
>[    0.066394] pid_max: default: 32768 minimum: 301
>[    0.066538] Mount-cache hash table entries: 4096 (order: 0, 16384 bytes)
>[    0.066549] Mountpoint-cache hash table entries: 4096 (order: 0, 16384 bytes)
>[    0.067140] Initializing cgroup subsys io
>[    0.067161] Initializing cgroup subsys memory
>[    0.067193] Initializing cgroup subsys devices
>[    0.067205] Initializing cgroup subsys freezer
>[    0.067218] Initializing cgroup subsys net_cls
>[    0.067229] Initializing cgroup subsys perf_event
>[    0.067245] Initializing cgroup subsys net_prio
>[    0.067259] Initializing cgroup subsys pids
>[    0.067502] Performance counters: mips/P5600 PMU enabled, 4 32-bit counters available to each CPU, irq 3
>[    0.070811] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
>[    0.070819] Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 bytes
>[    0.070826] MIPS secondary cache 1024kB, 8-way, linesize 32 bytes.
>[    0.070906] Extended Physical Addressing (XPA) enabled
>[    0.070914] CPU1 revision is: 0001a830 (MIPS P5600)
>[    0.070917] FPU revision is: 30f30320
>[    0.070919] MSA revision is: 00000320
>[    0.108598] Brought up 2 CPUs
>[    0.109096] devtmpfs: initialized
>[    0.112795] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>[    0.112848] futex hash table entries: 512 (order: 0, 16384 bytes)
>[    0.113521] NET: Registered protocol family 16
>[    0.135914] cdmm0 discovery (3 blocks)
>[    0.135962] cdmm0-0: @0 (0x0..0xbf), type 0xfd, rev 0
>[    0.136113] cdmm1 discovery (3 blocks)
>[    0.136142] cdmm1-0: @0 (0x0..0xbf), type 0xfd, rev 0
>[    0.136947] dw_dmac 1f041000.dma: DesignWare DMA Controller, 8 channels
>[    0.137269] vgaarb: loaded
>[    0.137506] SCSI subsystem initialized
>[    0.137702] libata version 3.00 loaded.
>[    0.137878] usbcore: registered new interface driver usbfs
>[    0.137938] usbcore: registered new interface driver hub
>[    0.137989] usbcore: registered new device driver usb
>[    0.138637] pps_core: LinuxPPS API ver. 1 registered
>[    0.138663] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.138715] PTP clock support registered
>[    0.139031] Advanced Linux Sound Architecture Driver Initialized.
>[    0.139813] clocksource: Switched to clocksource GIC
>[    0.145847] NET: Registered protocol family 2
>[    0.146327] TCP established hash table entries: 4096 (order: 0, 16384 bytes)
>[    0.146376] TCP bind hash table entries: 4096 (order: 1, 32768 bytes)
>[    0.146419] TCP: Hash tables configured (established 4096 bind 4096)
>[    0.146480] UDP hash table entries: 512 (order: 0, 16384 bytes)
>[    0.146517] UDP-Lite hash table entries: 512 (order: 0, 16384 bytes)
>[    0.146657] NET: Registered protocol family 1
>[    0.146961] RPC: Registered named UNIX socket transport module.
>[    0.146985] RPC: Registered udp transport module.
>[    0.147005] RPC: Registered tcp transport module.
>[    0.147024] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.147055] PCI: CLS 0 bytes, default 32
>[    0.147216] Trying to unpack rootfs image as initramfs...
>[    0.289943] Freeing initrd memory: 3216K
>[    0.290442] be-apb 1f059000.apb_ehb: Baikal Peripheral Bus Error handler
>[    0.290467] be-apb 1f059000.apb_ehb: Version 1.02
>[    0.290646] be-axi 1f04d110.axi_ehb: Baikal Interconnect Error handler
>[    0.290670] be-axi 1f04d110.axi_ehb: Version 1.02
>[    0.290868] be-emc 1f042000.emc: Baikal Extended Memory controller
>[    0.290891] be-emc 1f042000.emc: Version 1.01
>[    0.290917] be-emc 1f042000.emc: DDR3 ranks:1 ecc:off burst:16 bus:DQ/1 timing:1T bchop:0 bmode:0
>[    0.291068] be-wdt axi:gic_wdt: Baikal Electronics GIC Watchdog Driver
>[    0.291092] be-wdt axi:gic_wdt: Version 1.01
>[    0.291113] be-wdt axi:gic_wdt: Mode: Programm Interval Timer
>[    0.391048] be-bc 1f040000.bc: Baikal Electronics Boot Controller Driver
>[    0.391074] be-bc 1f040000.bc: VID: 0x0000abf0, DRID: 0x00100013
>[    0.391096] be-bc 1f040000.bc: Version 1.02
>[    0.391711] audit: initializing netlink subsys (disabled)
>[    0.391777] audit: type=2000 audit(0.379:1): initialized
>[    0.392735] NFS: Registering the id_resolver key type
>[    0.392787] Key type id_resolver registered
>[    0.392808] Key type id_legacy registered
>[    0.392838] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
>[    0.392921] jffs2: version 2.2. (NAND) (SUMMARY)  \xffffffc2\xffffffa9\xffffffa9 2001-2006 Red Hat, Inc.
>[    0.393972] bounce: pool size: 64 pages
>[    0.394039] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.394081] io scheduler noop registered
>[    0.394106] io scheduler deadline registered
>[    0.394153] io scheduler cfq registered (default)
>[    0.394419] gpiochip_find_base: found new base at 0
>[    0.394493] gpiochip_add: registered GPIOs 0 to 31 on device: 1f044000.gpio
>[    0.397001] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
>[    0.399498] console [ttyS0] disabled
>[    0.399549] 1f04a000.serial0: ttyS0 at MMIO 0x1f04a000 (irq = 55, base_baud = 459558) is a 16550A
>[    1.168815] console [ttyS0] enabled
>[    1.172712] 1f04b000.serial1: ttyS1 at MMIO 0x1f04b000 (irq = 56, base_baud = 459558) is a 16550A
>[    1.181893] [drm] Initialized drm 1.1.0 20060810
>[    1.188384] brd: module loaded
>[    1.193326] loop: module loaded
>[    1.198936] nbd: registered device at major 43
>[    1.207447] at24 1-0070: 256 byte 24c02 EEPROM, writable, 8 bytes/write
>[    1.214532] ahci 1f050000.sata: SSS flag set, parallel bus scan disabled
>[    1.221313] ahci 1f050000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
>[    1.229904] ahci 1f050000.sata: flags: ncq sntf stag pm led clo only pmp fbs pio slum part ccc apst 
>[    1.239102] ahci 1f050000.sata: port 0 is not capable of FBS
>[    1.246319] ahci 1f050000.sata: port 1 is not capable of FBS
>[    1.254212] scsi host0: ahci
>[    1.257416] scsi host1: ahci
>[    1.260505] ata1: SATA max UDMA/133 mmio [mem 0x1f050000-0x1f051fff] port 0x100 irq 71
>[    1.268474] ata2: FORCE: PHY spd limit set to 1.5Gbps
>[    1.273565] ata2: SATA max UDMA/133 mmio [mem 0x1f050000-0x1f051fff] port 0x180 irq 71
>[    1.282098] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/apb/spi0@1F04E000[0]' - status (-517)
>[    1.282150] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/apb/spi1@1F04F000[0]'
>[    1.282156] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/apb/spi1@1F04F000[1]'
>[    1.282162] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/apb/spi1@1F04F000[2]'
>[    1.282168] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/apb/spi1@1F04F000[3]'
>[    1.282992] of_get_named_gpiod_flags: parsed 'mdc-pin' property of node '/axi/be-mdio[0]' - status (0)
>[    1.283005] of_get_named_gpiod_flags: parsed 'mdio-pin' property of node '/axi/be-mdio[0]' - status (0)
>[    1.283012] of_get_named_gpiod_flags: can't parse 'mdo-pin' property of node '/axi/be-mdio[0]'
>[    1.283021] of_get_named_gpiod_flags: parsed 'rst-pin' property of node '/axi/be-mdio[0]' - status (0)
>[    1.283100] libphy: Baikal GPIO MDIO bus: probed
>[    1.376915] be-mdio axi:be-mdio: MDIO ptr=871ac400
>[    1.381770] be-mdio axi:be-mdio: Baikal Electronics mezzanine card MDIO bus driver
>[    1.389389] be-mdio axi:be-mdio: Version: 1.04a
>[    1.394092] CAN device driver interface
>[    1.398820] be-xgbe 1f054000.eth0 eth0: net device enabled
>[    1.404421] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.411516] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.417345] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>[    1.423217] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>[    1.429213] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
>[    1.436926] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
>[    1.442753] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
>[    1.452212] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
>[    1.458380] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
>[    1.465558] ixgb: Copyright (c) 1999-2008 Intel Corporation.
>[    1.471376] baikal-dwmac 1f05e000.eth1: Baikal Electronics DWMAC glue driver
>[    1.478496] baikal-dwmac 1f05e000.eth1: no reset control found
>[    1.484372] stmmac - user ID: 0x10, Synopsys ID: 0x37
>[    1.489450]  Ring mode enabled
>[    1.492531]  DMA HW capability register supported
>[    1.497077]  Enhanced/Alternate descriptors
>[    1.501487] 	Enabled extended descriptors
>[    1.505520]  RX Checksum Offload Engine supported (type 2)
>[    1.511039]  TX Checksum insertion supported
>[    1.515333]  Wake-Up On Lan supported
>[    1.519047]  Enable RX Mitigation via HW Watchdog Timer
>[    1.524375] of_get_named_gpiod_flags: can't parse 'snps,reset-gpio' property of node '/axi/eth1@1F05E000[0]'
>[    1.536562] libphy: stmmac: probed
>[    1.540012] eth%d: PHY ID 00221622 at 3 IRQ POLL (stmmac-0:03) active
>[    1.546944] baikal-dwmac 1f060000.eth2: Baikal Electronics DWMAC glue driver
>[    1.554080] baikal-dwmac 1f060000.eth2: no reset control found
>[    1.559954] stmmac - user ID: 0x10, Synopsys ID: 0x37
>[    1.565033]  Ring mode enabled
>[    1.568108]  DMA HW capability register supported
>[    1.572659]  Enhanced/Alternate descriptors
>[    1.577063] 	Enabled extended descriptors
>[    1.581102]  RX Checksum Offload Engine supported (type 2)
>[    1.586616]  TX Checksum insertion supported
>[    1.590916]  Wake-Up On Lan supported
>[    1.594628]  Enable RX Mitigation via HW Watchdog Timer
>[    1.599947] of_get_named_gpiod_flags: can't parse 'snps,reset-gpio' property of node '/axi/eth2@1F060000[0]'
>[    1.612069] libphy: stmmac: probed
>[    1.615509] eth%d: PHY ID 00221622 at 3 IRQ POLL (stmmac-1:03) active
>[    1.622597] usbcore: registered new interface driver asix
>[    1.628071] usbcore: registered new interface driver ax88179_178a
>[    1.634243] usbcore: registered new interface driver cdc_ether
>[    1.640174] usbcore: registered new interface driver cdc_ncm
>[    1.829820] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.836173] ata1.00: ATA-9: nanoSSD 3SE, S141002C, max UDMA/133
>[    1.842148] ata1.00: 15649200 sectors, multi 16: LBA48 NCQ (depth 31/32)
>[    1.848083] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.848090] ohci-pci: OHCI PCI platform driver
>[    1.848143] ohci-platform: OHCI generic platform driver
>[    1.848353] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
>[    1.848450] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
>[    1.848828] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x00010010
>[    1.848865] xhci-hcd xhci-hcd.0.auto: irq 75, io mem 0x1f100000
>[    1.848999] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.849004] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.849008] usb usb1: Product: xHCI Host Controller
>[    1.849013] usb usb1: Manufacturer: Linux 4.4.135-cpc313 xhci-hcd
>[    1.849016] usb usb1: SerialNumber: xhci-hcd.0.auto
>[    1.849402] hub 1-0:1.0: USB hub found
>[    1.849432] hub 1-0:1.0: 1 port detected
>[    1.849653] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
>[    1.849738] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
>[    1.849806] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
>[    1.849889] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.849894] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.849898] usb usb2: Product: xHCI Host Controller
>[    1.849902] usb usb2: Manufacturer: Linux 4.4.135-cpc313 xhci-hcd
>[    1.849906] usb usb2: SerialNumber: xhci-hcd.0.auto
>[    1.850233] hub 2-0:1.0: USB hub found
>[    1.850255] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
>[    1.850443] usbcore: registered new interface driver uas
>[    1.850522] usbcore: registered new interface driver usb-storage
>[    1.850592] usbcore: registered new interface driver usbserial
>[    1.850616] usbcore: registered new interface driver usbserial_generic
>[    1.850642] usbserial: USB Serial support registered for generic
>[    2.023400] ata1.00: configured for UDMA/133
>[    2.351114] i8042: i8042 controller selftest timeout
>[    2.356704] mousedev: PS/2 mouse device common for all mice
>[    2.356804] scsi 0:0:0:0: Direct-Access     ATA      nanoSSD 3SE      002C PQ: 0 ANSI: 5
>[    2.357488] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
>[    2.357630] sd 0:0:0:0: [sda] Write Protect is off
>[    2.357637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.357700] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.358293] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.358602]  sda: sda1
>[    2.359277] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.404639] abeoa9s3 : 
>[    2.407112] 		mode = 0
>[    2.409490] 		bits_per_word = 8
>[    2.412667] 		max_speed_hz = 200000
>[    2.416179] 		chip_select = 0
>[    2.419167] 		cs_gpio = -2
>[    2.422253] rtc-ab-eoa9-s3 spi1.0: abeoa9s3_spi_validate: register=00, value=0xff
>[    2.429787] rtc-ab-eoa9-s3 spi1.0: abeoa9s3_spi_validate: register=01, mask=0xe0, value=0xff
>[    2.438359] i2c /dev entries driver
>[    2.442609] md: linear personality registered for level -1
>[    2.448135] md: raid0 personality registered for level 0
>[    2.453502] md: raid1 personality registered for level 1
>[    2.458967] usbcore: registered new interface driver usbhid
>[    2.464579] usbhid: USB HID core driver
>[    2.469056] dw_pci 1f052000.pci: DW PCIe driver successfully loaded.
>[    2.475482] dw_pci 1f052000.pci: MSI IRQ:95   AER IRQ:96
>[    2.480939] Netfilter messages via NETLINK v0.30.
>[    2.485712] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[    2.492105] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
>[    2.499154] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    2.504655] arp_tables: (C) 2002 David S. Miller
>[    2.509370] Initializing XFRM netlink socket
>[    2.513772] NET: Registered protocol family 10
>[    2.518948] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[    2.524555] sit: IPv6 over IPv4 tunneling driver
>[    2.529661] NET: Registered protocol family 17
>[    2.534167] NET: Registered protocol family 15
>[    2.538640] can: controller area network core (rev 20120528 abi 9)
>[    2.544911] NET: Registered protocol family 29
>[    2.549386] can: raw protocol (rev 20120528)
>[    2.553693] can: broadcast manager protocol (rev 20120528 t)
>[    2.559438] Key type dns_resolver registered
>[    2.564328] dw_pcie_init: DEV_ID_VEND_ID=0x80601d39 CLASS_CODE_REV_ID=0x1
>[    2.571190] dw_pcie_init: PCIe error code = 0x0
>[    2.575747] dw_pcie_init: PCIe link speed GEN1
>[    2.579823] usb 1-1: new high-speed USB device number 2 using xhci-hcd
>[    2.587325] PCI host bridge to bus 0000:01
>[    2.591470] pci_bus 0000:01: root bus resource [mem 0x08000000-0x17ffffff]
>[    2.598382] pci_bus 0000:01: root bus resource [io  0x18020000-0x1bdaffff]
>[    2.605306] pci_bus 0000:01: root bus resource [bus 01-ff]
>[    2.610829] pci_bus 0000:01: scanning bus
>[    2.610886] pci 0000:01:00.0: [10b5:8725] type 01 class 0x060400
>[    2.610981] pci 0000:01:00.0: reg 0x10: [mem 0x04000000-0x0403ffff]
>[    2.611245] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>[    2.611260] pci 0000:01:00.0: PME# disabled
>[    2.611543] pci 0000:01:00.1: [10b5:87d0] type 00 class 0x088000
>[    2.611620] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x00001fff]
>[    2.612032] pci 0000:01:00.2: [10b5:87d0] type 00 class 0x088000
>[    2.612109] pci 0000:01:00.2: reg 0x10: [mem 0x00000000-0x00001fff]
>[    2.612520] pci 0000:01:00.3: [10b5:87d0] type 00 class 0x088000
>[    2.612596] pci 0000:01:00.3: reg 0x10: [mem 0x00000000-0x00001fff]
>[    2.613013] pci 0000:01:00.4: [10b5:87d0] type 00 class 0x088000
>[    2.613089] pci 0000:01:00.4: reg 0x10: [mem 0x00000000-0x00001fff]
>[    2.613494] pci_bus 0000:01: fixups for bus
>[    2.613506] pci 0000:01:00.0: scanning [bus 02-ff] behind bridge, pass 0
>[    2.613532] pci 0000:01:00.0: scanning [bus 00-00] behind bridge, pass 1
>[    2.613677] pci_bus 0000:02: scanning bus
>[    2.613728] pci 0000:02:01.0: [10b5:8725] type 01 class 0x060400
>[    2.614051] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
>[    2.614064] pci 0000:02:01.0: PME# disabled
>[    2.614324] pci 0000:02:02.0: [10b5:8725] type 01 class 0x060400
>[    2.614646] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
>[    2.614659] pci 0000:02:02.0: PME# disabled
>[    2.614926] pci 0000:02:03.0: [10b5:8725] type 01 class 0x060400
>[    2.615247] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
>[    2.615260] pci 0000:02:03.0: PME# disabled
>[    2.615525] pci 0000:02:04.0: [10b5:8725] type 01 class 0x060400
>[    2.615847] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
>[    2.615860] pci 0000:02:04.0: PME# disabled
>[    2.616133] pci 0000:02:05.0: [10b5:8725] type 01 class 0x060400
>[    2.616454] pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
>[    2.616467] pci 0000:02:05.0: PME# disabled
>[    2.616745] pci 0000:02:08.0: [10b5:8725] type 01 class 0x060400
>[    2.617066] pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
>[    2.617080] pci 0000:02:08.0: PME# disabled
>[    2.617358] pci 0000:02:0a.0: [10b5:8725] type 01 class 0x060400
>[    2.617679] pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
>[    2.617693] pci 0000:02:0a.0: PME# disabled
>[    2.617971] pci 0000:02:0b.0: [10b5:8725] type 01 class 0x060400
>[    2.618316] pci 0000:02:0b.0: PME# supported from D0 D3hot D3cold
>[    2.618329] pci 0000:02:0b.0: PME# disabled
>[    2.618610] pci 0000:02:0c.0: [10b5:8725] type 01 class 0x060400
>[    2.618932] pci 0000:02:0c.0: PME# supported from D0 D3hot D3cold
>[    2.618945] pci 0000:02:0c.0: PME# disabled
>[    2.619234] pci 0000:02:0d.0: [10b5:8725] type 01 class 0x060400
>[    2.619556] pci 0000:02:0d.0: PME# supported from D0 D3hot D3cold
>[    2.619569] pci 0000:02:0d.0: PME# disabled
>[    2.619900] pci_bus 0000:02: fixups for bus
>[    2.619911] pci 0000:02:01.0: scanning [bus 00-00] behind bridge, pass 0
>[    2.619918] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>[    2.627996] pci 0000:02:02.0: scanning [bus 00-00] behind bridge, pass 0
>[    2.628003] pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>[    2.636083] pci 0000:02:03.0: scanning [bus 00-00] behind bridge, pass 0
>[    2.636089] pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>[    2.644180] pci 0000:02:04.0: scanning [bus 00-00] behind bridge, pass 0
>[    2.644187] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>[    2.652265] pci 0000:02:05.0: scanning [bus 00-00] behind bridge, pass 0
>[    2.652272] pci 0000:02:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>[    2.660349] pci 0000:02:08.0: scanning [bus 00-00] behind bridge, pass 0
>[    2.660356] pci 0000:02:08.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>[    2.668427] pci 0000:02:0a.0: scanning [bus 00-00] behind bridge, pass 0
>[    2.668433] pci 0000:02:0a.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>[    2.676510] pci 0000:02:0b.0: scanning [bus 0b-0b] behind bridge, pass 0
>[    2.676534] pci 0000:02:0c.0: scanning [bus 00-00] behind bridge, pass 0
>[    2.676541] pci 0000:02:0c.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>[    2.684618] pci 0000:02:0d.0: scanning [bus 00-00] behind bridge, pass 0
>[    2.684625] pci 0000:02:0d.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>[    2.692702] pci 0000:02:01.0: scanning [bus 00-00] behind bridge, pass 1
>[    2.692854] pci_bus 0000:03: scanning bus
>[    2.692866] pci_bus 0000:03: fixups for bus
>[    2.692873] pci_bus 0000:03: bus scan returning with max=03
>[    2.692883] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
>[    2.692903] pci 0000:02:02.0: scanning [bus 00-00] behind bridge, pass 1
>[    2.693044] pci_bus 0000:04: scanning bus
>[    2.693055] pci_bus 0000:04: fixups for bus
>[    2.693061] pci_bus 0000:04: bus scan returning with max=04
>[    2.693069] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
>[    2.693087] pci 0000:02:03.0: scanning [bus 00-00] behind bridge, pass 1
>[    2.693227] pci_bus 0000:05: scanning bus
>[    2.693238] pci_bus 0000:05: fixups for bus
>[    2.693244] pci_bus 0000:05: bus scan returning with max=05
>[    2.693251] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
>[    2.693270] pci 0000:02:04.0: scanning [bus 00-00] behind bridge, pass 1
>[    2.693409] pci_bus 0000:06: scanning bus
>[    2.693420] pci_bus 0000:06: fixups for bus
>[    2.693426] pci_bus 0000:06: bus scan returning with max=06
>[    2.693433] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
>[    2.693452] pci 0000:02:05.0: scanning [bus 00-00] behind bridge, pass 1
>[    2.693592] pci_bus 0000:07: scanning bus
>[    2.693603] pci_bus 0000:07: fixups for bus
>[    2.693609] pci_bus 0000:07: bus scan returning with max=07
>[    2.693617] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
>[    2.693635] pci 0000:02:08.0: scanning [bus 00-00] behind bridge, pass 1
>[    2.693775] pci_bus 0000:08: scanning bus
>[    2.693786] pci_bus 0000:08: fixups for bus
>[    2.693792] pci_bus 0000:08: bus scan returning with max=08
>[    2.693799] pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08
>[    2.693818] pci 0000:02:0a.0: scanning [bus 00-00] behind bridge, pass 1
>[    2.693965] pci_bus 0000:09: scanning bus
>[    2.694024] pci 0000:09:00.0: [12d8:e113] type 01 class 0x060400
>[    2.694324] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
>[    2.694339] pci 0000:09:00.0: PME# disabled
>[    2.709846] pci_bus 0000:09: fixups for bus
>[    2.709860] pci 0000:09:00.0: scanning [bus 00-00] behind bridge, pass 0
>[    2.709867] pci 0000:09:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>[    2.717945] pci 0000:09:00.0: scanning [bus 00-00] behind bridge, pass 1
>[    2.718108] pci_bus 0000:0a: scanning bus
>[    2.718260] pci_bus 0000:0a: fixups for bus
>[    2.718267] pci_bus 0000:0a: bus scan returning with max=0a
>[    2.718275] pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 0a
>[    2.718290] pci_bus 0000:09: bus scan returning with max=0a
>[    2.718298] pci_bus 0000:09: busn_res: [bus 09-ff] end is updated to 0a
>[    2.718316] pci 0000:02:0b.0: scanning [bus 00-00] behind bridge, pass 1
>[    2.718459] pci_bus 0000:0b: scanning bus
>[    2.718512] pci 0000:0b:00.0: [126f:0750] type 00 class 0x030000
>[    2.718627] pci 0000:0b:00.0: reg 0x10: [mem 0x08000000-0x0bffffff]
>[    2.718662] pci 0000:0b:00.0: reg 0x14: [mem 0x0c000000-0x0c1fffff]
>[    2.718814] pci 0000:0b:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
>[    2.718964] pci 0000:0b:00.0: supports D1
>[    2.718971] pci 0000:0b:00.0: PME# supported from D0 D1 D3hot
>[    2.718985] pci 0000:0b:00.0: PME# disabled
>[    2.719180] vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=none,locks=none
>[    2.727336] usb 1-1: New USB device found, idVendor=0424, idProduct=2422
>[    2.734104] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.739852] pci_bus 0000:0b: fixups for bus
>[    2.739856] pci_bus 0000:0b: bus scan returning with max=0b
>[    2.739862] pci_bus 0000:0b: busn_res: [bus 0b-ff] end is updated to 0b
>[    2.739880] pci 0000:02:0c.0: scanning [bus 00-00] behind bridge, pass 1
>[    2.740029] pci_bus 0000:0c: scanning bus
>[    2.740083] pci 0000:0c:00.0: [9710:9990] type 00 class 0x0c0310
>[    2.740173] pci 0000:0c:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
>[    2.740442] pci 0000:0c:00.0: supports D1 D2
>[    2.740446] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    2.740459] pci 0000:0c:00.0: PME# disabled
>[    2.740711] pci 0000:0c:00.1: [9710:9990] type 00 class 0x0c0320
>[    2.740799] pci 0000:0c:00.1: reg 0x10: [mem 0x00000000-0x00000fff]
>[    2.741044] pci 0000:0c:00.1: supports D1 D2
>[    2.741049] pci 0000:0c:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    2.741061] pci 0000:0c:00.1: PME# disabled
>[    2.741278] pci 0000:0c:00.2: [9710:9990] type 00 class 0x0c0310
>[    2.741366] pci 0000:0c:00.2: reg 0x10: [mem 0x00000000-0x00000fff]
>[    2.741614] pci 0000:0c:00.2: supports D1 D2
>[    2.741621] pci 0000:0c:00.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    2.741636] pci 0000:0c:00.2: PME# disabled
>[    2.741728] ata2: SATA link down (SStatus 0 SControl 310)
>[    2.741865] pci 0000:0c:00.3: [9710:9990] type 00 class 0x0c0320
>[    2.741954] pci 0000:0c:00.3: reg 0x10: [mem 0x00000000-0x00000fff]
>[    2.742199] pci 0000:0c:00.3: supports D1 D2
>[    2.742204] pci 0000:0c:00.3: PME# supported from D0 D1 D2 D3hot D3cold
>[    2.742216] pci 0000:0c:00.3: PME# disabled
>[    2.742437] pci 0000:0c:00.4: [9710:9990] type 00 class 0x0c0310
>[    2.742525] pci 0000:0c:00.4: reg 0x10: [mem 0x00000000-0x00000fff]
>[    2.742770] pci 0000:0c:00.4: supports D1 D2
>[    2.742775] pci 0000:0c:00.4: PME# supported from D0 D1 D2 D3hot D3cold
>[    2.742787] pci 0000:0c:00.4: PME# disabled
>[    2.743004] pci 0000:0c:00.5: [9710:9990] type 00 class 0x0c0320
>[    2.743092] pci 0000:0c:00.5: reg 0x10: [mem 0x00000000-0x00000fff]
>[    2.743338] pci 0000:0c:00.5: supports D1 D2
>[    2.743343] pci 0000:0c:00.5: PME# supported from D0 D1 D2 D3hot D3cold
>[    2.743355] pci 0000:0c:00.5: PME# disabled
>[    2.743573] pci 0000:0c:00.6: [9710:9990] type 00 class 0x0c0310
>[    2.743662] pci 0000:0c:00.6: reg 0x10: [mem 0x00000000-0x00000fff]
>[    2.743907] pci 0000:0c:00.6: supports D1 D2
>[    2.743911] pci 0000:0c:00.6: PME# supported from D0 D1 D2 D3hot D3cold
>[    2.743923] pci 0000:0c:00.6: PME# disabled
>[    2.744141] pci 0000:0c:00.7: [9710:9990] type 00 class 0x0c0320
>[    2.744228] pci 0000:0c:00.7: reg 0x10: [mem 0x00000000-0x00000fff]
>[    2.744473] pci 0000:0c:00.7: supports D1 D2
>[    2.744477] pci 0000:0c:00.7: PME# supported from D0 D1 D2 D3hot D3cold
>[    2.744489] pci 0000:0c:00.7: PME# disabled
>[    2.759948] pci_bus 0000:0c: fixups for bus
>[    2.759958] pci_bus 0000:0c: bus scan returning with max=0c
>[    2.759968] pci_bus 0000:0c: busn_res: [bus 0c-ff] end is updated to 0c
>[    2.759989] pci 0000:02:0d.0: scanning [bus 00-00] behind bridge, pass 1
>[    2.760153] pci_bus 0000:0d: scanning bus
>[    2.760166] pci_bus 0000:0d: fixups for bus
>[    2.760172] pci_bus 0000:0d: bus scan returning with max=0d
>[    2.760180] pci_bus 0000:0d: busn_res: [bus 0d-ff] end is updated to 0d
>[    2.760194] pci_bus 0000:02: bus scan returning with max=0d
>[    2.760202] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 0d
>[    2.760217] pci_bus 0000:01: bus scan returning with max=0d
>[    2.760520] pci 0000:01:00.0: BAR 14: assigned [mem 0x08000000-0x0effffff]
>[    2.767442] pci 0000:01:00.0: BAR 15: assigned [mem 0x0f000000-0x0f3fffff 64bit pref]
>[    2.775347] pci 0000:01:00.0: BAR 0: assigned [mem 0x0f400000-0x0f43ffff]
>[    2.782202] pci 0000:01:00.1: BAR 0: assigned [mem 0x0f440000-0x0f441fff]
>[    2.789056] pci 0000:01:00.2: BAR 0: assigned [mem 0x0f442000-0x0f443fff]
>[    2.789178] hub 1-1:1.0: USB hub found
>[    2.795909] hub 1-1:1.0: 2 ports detected
>[    2.803748] pci 0000:01:00.3: BAR 0: assigned [mem 0x0f444000-0x0f445fff]
>[    2.810596] pci 0000:01:00.4: BAR 0: assigned [mem 0x0f446000-0x0f447fff]
>[    2.817441] pci 0000:01:00.0: BAR 13: assigned [io  0x18020000-0x18021fff]
>[    2.824379] pci 0000:02:0b.0: BAR 14: assigned [mem 0x08000000-0x0dffffff]
>[    2.831299] pci 0000:02:01.0: BAR 14: assigned [mem 0x0e000000-0x0e1fffff]
>[    2.838212] pci 0000:02:01.0: BAR 15: assigned [mem 0x0f000000-0x0f1fffff 64bit pref]
>[    2.846100] pci 0000:02:02.0: BAR 14: assigned [mem 0x0e200000-0x0e3fffff]
>[    2.853018] pci 0000:02:02.0: BAR 15: assigned [mem 0x0f200000-0x0f3fffff 64bit pref]
>[    2.860905] pci 0000:02:0c.0: BAR 14: assigned [mem 0x0e400000-0x0e4fffff]
>[    2.867817] pci 0000:02:01.0: BAR 13: assigned [io  0x18020000-0x18020fff]
>[    2.874734] pci 0000:02:02.0: BAR 13: assigned [io  0x18021000-0x18021fff]
>[    2.881652] pci 0000:02:01.0: PCI bridge to [bus 03]
>[    2.886651] pci 0000:02:01.0:   bridge window [io  0x18020000-0x18020fff]
>[    2.893495] pci 0000:02:01.0:   bridge window [mem 0x0e000000-0x0e1fffff]
>[    2.900330] pci 0000:02:01.0:   bridge window [mem 0x0f000000-0x0f1fffff 64bit pref]
>[    2.908136] pci 0000:02:02.0: PCI bridge to [bus 04]
>[    2.913140] pci 0000:02:02.0:   bridge window [io  0x18021000-0x18021fff]
>[    2.919990] pci 0000:02:02.0:   bridge window [mem 0x0e200000-0x0e3fffff]
>[    2.926831] pci 0000:02:02.0:   bridge window [mem 0x0f200000-0x0f3fffff 64bit pref]
>[    2.934644] pci 0000:02:03.0: PCI bridge to [bus 05]
>[    2.939667] pci 0000:02:04.0: PCI bridge to [bus 06]
>[    2.944697] pci 0000:02:05.0: PCI bridge to [bus 07]
>[    2.949721] pci 0000:02:08.0: PCI bridge to [bus 08]
>[    2.954750] pci 0000:09:00.0: PCI bridge to [bus 0a]
>[    2.959777] pci 0000:02:0a.0: PCI bridge to [bus 09-0a]
>[    2.965071] pci 0000:0b:00.0: BAR 0: assigned [mem 0x08000000-0x0bffffff]
>[    2.971909] pci 0000:0b:00.0: BAR 1: assigned [mem 0x0c000000-0x0c1fffff]
>[    2.978741] pci 0000:0b:00.0: BAR 6: assigned [mem 0x0c200000-0x0c20ffff pref]
>[    2.986017] pci 0000:02:0b.0: PCI bridge to [bus 0b]
>[    2.991026] pci 0000:02:0b.0:   bridge window [mem 0x08000000-0x0dffffff]
>[    2.997873] pci 0000:0c:00.0: BAR 0: assigned [mem 0x0e400000-0x0e400fff]
>[    3.004712] pci 0000:0c:00.1: BAR 0: assigned [mem 0x0e401000-0x0e401fff]
>[    3.011550] pci 0000:0c:00.2: BAR 0: assigned [mem 0x0e402000-0x0e402fff]
>[    3.018382] pci 0000:0c:00.3: BAR 0: assigned [mem 0x0e403000-0x0e403fff]
>[    3.025225] pci 0000:0c:00.4: BAR 0: assigned [mem 0x0e404000-0x0e404fff]
>[    3.032064] pci 0000:0c:00.5: BAR 0: assigned [mem 0x0e405000-0x0e405fff]
>[    3.038896] pci 0000:0c:00.6: BAR 0: assigned [mem 0x0e406000-0x0e406fff]
>[    3.045735] pci 0000:0c:00.7: BAR 0: assigned [mem 0x0e407000-0x0e407fff]
>[    3.052575] pci 0000:02:0c.0: PCI bridge to [bus 0c]
>[    3.057578] pci 0000:02:0c.0:   bridge window [mem 0x0e400000-0x0e4fffff]
>[    3.064425] pci 0000:02:0d.0: PCI bridge to [bus 0d]
>[    3.069448] pci 0000:01:00.0: PCI bridge to [bus 02-0d]
>[    3.074712] pci 0000:01:00.0:   bridge window [io  0x18020000-0x18021fff]
>[    3.081542] pci 0000:01:00.0:   bridge window [mem 0x08000000-0x0effffff]
>[    3.088369] pci 0000:01:00.0:   bridge window [mem 0x0f000000-0x0f3fffff 64bit pref]
>[    3.096198] pci 0000:01:00.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.096209] pci 0000:01:00.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.096220] pci 0000:01:00.0: Link Capability is GEN3, x4
>[    3.101657] pci 0000:01:00.0: Link Status is     GEN1, x4
>[    3.107086] pci 0000:01:00.0: retrain link to GEN3
>[    3.114817] pci 0000:01:00.0: Link Status is     GEN3, x4
>[    3.120410] PCI MSI: setup hwirq:0  virq:51
>[    3.125014] pci 0000:01:00.1: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.125025] pci 0000:01:00.1: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.125036] pci 0000:01:00.1: Link Capability is GEN3, x4
>[    3.130476] pci 0000:01:00.1: Link Status is     GEN3, x4
>[    3.135949] pci 0000:01:00.2: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.135959] pci 0000:01:00.2: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.135969] pci 0000:01:00.2: Link Capability is GEN3, x4
>[    3.141409] pci 0000:01:00.2: Link Status is     GEN3, x4
>[    3.146858] pci 0000:01:00.3: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.146867] pci 0000:01:00.3: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.146877] pci 0000:01:00.3: Link Capability is GEN3, x4
>[    3.152320] pci 0000:01:00.3: Link Status is     GEN3, x4
>[    3.157769] pci 0000:01:00.4: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.157778] pci 0000:01:00.4: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.157788] pci 0000:01:00.4: Link Capability is GEN3, x4
>[    3.163226] pci 0000:01:00.4: Link Status is     GEN3, x4
>[    3.168675] pci 0000:02:01.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.168684] pci 0000:02:01.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.168694] pci 0000:02:01.0: Link Capability is GEN3, x4
>[    3.174132] pci 0000:02:01.0: Link Status is     GEN3, x4
>[    3.179588] PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
>[    3.185383] pcieport 0000:02:01.0: enabling bus mastering
>[    3.185413] PCI MSI: setup hwirq:1  virq:52
>[    3.190054] pci 0000:02:02.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.190065] pci 0000:02:02.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.190076] pci 0000:02:02.0: Link Capability is GEN3, x2
>[    3.195507] pci 0000:02:02.0: Link Status is     GEN3, x4
>[    3.200967] PCI: Enabling device 0000:02:02.0 (0000 -> 0003)
>[    3.206756] pcieport 0000:02:02.0: enabling bus mastering
>[    3.206784] PCI MSI: setup hwirq:2  virq:53
>[    3.211369] pci 0000:02:03.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.211379] pci 0000:02:03.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.211390] pci 0000:02:03.0: Link Capability is GEN3, x2
>[    3.216821] pci 0000:02:03.0: Link Status is     GEN3, x4
>[    3.222371] pcieport 0000:02:03.0: enabling bus mastering
>[    3.222400] PCI MSI: setup hwirq:3  virq:54
>[    3.226926] pci 0000:02:04.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.226936] pci 0000:02:04.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.226947] pci 0000:02:04.0: Link Capability is GEN3, x2
>[    3.232387] pci 0000:02:04.0: Link Status is     GEN3, x4
>[    3.237919] pcieport 0000:02:04.0: enabling bus mastering
>[    3.237947] PCI MSI: setup hwirq:4  virq:57
>[    3.242486] pci 0000:02:05.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.242496] pci 0000:02:05.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.242507] pci 0000:02:05.0: Link Capability is GEN3, x2
>[    3.247937] pci 0000:02:05.0: Link Status is     GEN3, x4
>[    3.253486] pcieport 0000:02:05.0: enabling bus mastering
>[    3.253515] PCI MSI: setup hwirq:5  virq:58
>[    3.258041] pci 0000:02:08.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.258051] pci 0000:02:08.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.258061] pci 0000:02:08.0: Link Capability is GEN3, x4
>[    3.263502] pci 0000:02:08.0: Link Status is     GEN3, x4
>[    3.269041] pcieport 0000:02:08.0: enabling bus mastering
>[    3.269069] PCI MSI: setup hwirq:6  virq:59
>[    3.273660] pci 0000:02:0a.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.273670] pci 0000:02:0a.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.273680] pci 0000:02:0a.0: Link Capability is GEN3, x2
>[    3.279111] pci 0000:02:0a.0: Link Status is     GEN3, x4
>[    3.284665] pcieport 0000:02:0a.0: enabling bus mastering
>[    3.284694] PCI MSI: setup hwirq:7  virq:60
>[    3.289227] pci 0000:02:0b.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.289237] pci 0000:02:0b.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.289248] pci 0000:02:0b.0: Link Capability is GEN3, x2
>[    3.294689] pci 0000:02:0b.0: Link Status is     GEN3, x4
>[    3.300257] PCI MSI: setup hwirq:8  virq:61
>[    3.304784] pci 0000:02:0c.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.304794] pci 0000:02:0c.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.304805] pci 0000:02:0c.0: Link Capability is GEN3, x2
>[    3.310245] pci 0000:02:0c.0: Link Status is     GEN3, x4
>[    3.315687] PCI: Enabling device 0000:02:0c.0 (0000 -> 0002)
>[    3.321476] pcieport 0000:02:0c.0: enabling bus mastering
>[    3.321505] PCI MSI: setup hwirq:9  virq:62
>[    3.326033] pci 0000:02:0d.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.326043] pci 0000:02:0d.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.326054] pci 0000:02:0d.0: Link Capability is GEN3, x2
>[    3.331493] pci 0000:02:0d.0: Link Status is     GEN3, x4
>[    3.337032] pcieport 0000:02:0d.0: enabling bus mastering
>[    3.337060] PCI MSI: setup hwirq:10  virq:64
>[    3.341689] pci 0000:09:00.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.341700] pci 0000:09:00.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.341711] pci 0000:09:00.0: Link Capability is GEN1, x1
>[    3.347189] pci 0000:0b:00.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.347199] pci 0000:0b:00.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.347210] pci 0000:0b:00.0: Link Capability is GEN1, x1
>[    3.352678] pci 0000:0c:00.0: calling quirk_usb_early_handoff+0x0/0x748
>[    3.352695] PCI: Enabling device 0000:0c:00.0 (0000 -> 0002)
>[    3.409833] pci 0000:0c:00.0: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.409845] pci 0000:0c:00.0: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.409857] pci 0000:0c:00.0: Link Capability is GEN1, x1
>[    3.415402] ohci-pci 0000:0c:00.0: Found HC with no IRQ. Check BIOS/PCI 0000:0c:00.0 setup!
>[    3.423832] ohci-pci 0000:0c:00.0: init 0000:0c:00.0 fail, -19
>[    3.429711] pci 0000:0c:00.1: calling quirk_usb_early_handoff+0x0/0x748
>[    3.429726] PCI: Enabling device 0000:0c:00.1 (0000 -> 0002)
>[    3.435516] pci 0000:0c:00.1: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.435526] pci 0000:0c:00.1: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.435537] pci 0000:0c:00.1: Link Capability is GEN1, x1
>[    3.440995] pci 0000:0c:00.2: calling quirk_usb_early_handoff+0x0/0x748
>[    3.441010] PCI: Enabling device 0000:0c:00.2 (0000 -> 0002)
>[    3.499826] pci 0000:0c:00.2: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.499837] pci 0000:0c:00.2: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.499849] pci 0000:0c:00.2: Link Capability is GEN1, x1
>[    3.505382] ohci-pci 0000:0c:00.2: Found HC with no IRQ. Check BIOS/PCI 0000:0c:00.2 setup!
>[    3.513805] ohci-pci 0000:0c:00.2: init 0000:0c:00.2 fail, -19
>[    3.519681] pci 0000:0c:00.3: calling quirk_usb_early_handoff+0x0/0x748
>[    3.519696] PCI: Enabling device 0000:0c:00.3 (0000 -> 0002)
>[    3.525488] pci 0000:0c:00.3: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.525498] pci 0000:0c:00.3: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.525509] pci 0000:0c:00.3: Link Capability is GEN1, x1
>[    3.530969] pci 0000:0c:00.4: calling quirk_usb_early_handoff+0x0/0x748
>[    3.530984] PCI: Enabling device 0000:0c:00.4 (0000 -> 0002)
>[    3.589840] pci 0000:0c:00.4: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.589867] pci 0000:0c:00.4: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.589879] pci 0000:0c:00.4: Link Capability is GEN1, x1
>[    3.595414] ohci-pci 0000:0c:00.4: Found HC with no IRQ. Check BIOS/PCI 0000:0c:00.4 setup!
>[    3.603839] ohci-pci 0000:0c:00.4: init 0000:0c:00.4 fail, -19
>[    3.609716] pci 0000:0c:00.5: calling quirk_usb_early_handoff+0x0/0x748
>[    3.609731] PCI: Enabling device 0000:0c:00.5 (0000 -> 0002)
>[    3.615520] pci 0000:0c:00.5: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.615529] pci 0000:0c:00.5: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.615540] pci 0000:0c:00.5: Link Capability is GEN1, x1
>[    3.621000] pci 0000:0c:00.6: calling quirk_usb_early_handoff+0x0/0x748
>[    3.621015] PCI: Enabling device 0000:0c:00.6 (0000 -> 0002)
>[    3.679819] usb 1-1.2: new high-speed USB device number 3 using xhci-hcd
>[    3.686597] pci 0000:0c:00.6: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.686607] pci 0000:0c:00.6: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.686618] pci 0000:0c:00.6: Link Capability is GEN1, x1
>[    3.692164] ohci-pci 0000:0c:00.6: Found HC with no IRQ. Check BIOS/PCI 0000:0c:00.6 setup!
>[    3.700585] ohci-pci 0000:0c:00.6: init 0000:0c:00.6 fail, -19
>[    3.706461] pci 0000:0c:00.7: calling quirk_usb_early_handoff+0x0/0x748
>[    3.706476] PCI: Enabling device 0000:0c:00.7 (0000 -> 0002)
>[    3.712264] pci 0000:0c:00.7: calling baikal_t1_pcie_dmac_fixup+0x0/0x50
>[    3.712273] pci 0000:0c:00.7: calling baikal_t1_pcie_link_speed_fixup+0x0/0x1f4
>[    3.712285] pci 0000:0c:00.7: Link Capability is GEN1, x1
>[    3.717741] CMP IOCU detected
>[    3.720742] Hardware DMA cache coherency disabled
>[    3.726968] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/apb/spi0@1F04E000[0]' - status (-517)
>[    3.727043] hctosys: unable to open rtc device (rtc0)
>[    3.732309] ALSA device list:
>[    3.735302]   No soundcards found.
>[    3.738934] Freeing unused kernel memory: 304K
>[    3.779275] systemd-udevd[869]: starting version 215
>[    3.785288] random: systemd-udevd: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
>[    3.825501] usb 1-1.2: New USB device found, idVendor=0951, idProduct=1666
>[    3.832461] usb 1-1.2: New USB device strings: Mfr=3, Product=4, SerialNumber=5
>[    3.839836] usb 1-1.2: Product: DataTraveler 3.0
>[    3.844486] usb 1-1.2: Manufacturer: Kingston
>[    3.848877] usb 1-1.2: SerialNumber: 0018F30BFF7D0G11D131001E
>[    3.889482] usb-storage 1-1.2:1.0: USB Mass Storage device detected
>[    3.898896] scsi host2: usb-storage 1-1.2:1.0
>[    3.903904] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/apb/spi0@1F04E000[0]' - status (-517)
>[    4.901249] scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 3.0 1530 PQ: 0 ANSI: 6
>[    4.910476] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/apb/spi0@1F04E000[0]' - status (-517)
>[    4.910684] sd 2:0:0:0: Attached scsi generic sg1 type 0
>[    5.085233] sd 2:0:0:0: [sdb] 30277630 512-byte logical blocks: (15.5 GB/14.4 GiB)
>[    5.093571] sd 2:0:0:0: [sdb] Write Protect is off
>[    5.098398] sd 2:0:0:0: [sdb] Mode Sense: 21 00 00 00
>[    5.099096] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[    5.121011]  sdb: sdb1
>[    5.125914] sd 2:0:0:0: [sdb] Attached SCSI removable disk
>[    9.086434] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
>[    9.097496] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
>[    9.106815] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
>[    9.229681] random: systemd: uninitialized urandom read (4 bytes read, 59 bits of entropy available)
>[    9.239243] random: systemd: uninitialized urandom read (4 bytes read, 59 bits of entropy available)
>[    9.250868] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    9.273406] systemd[1]: Set hostname to <cpc516>.
>[    9.280070] random: systemd: uninitialized urandom read (4 bytes read, 60 bits of entropy available)
>[    9.289287] random: systemd: uninitialized urandom read (4 bytes read, 60 bits of entropy available)
>[    9.298566] random: systemd: uninitialized urandom read (4 bytes read, 60 bits of entropy available)
>[    9.307813] random: systemd: uninitialized urandom read (4 bytes read, 60 bits of entropy available)
>[    9.317056] random: systemd: uninitialized urandom read (4 bytes read, 60 bits of entropy available)
>[    9.326298] random: systemd: uninitialized urandom read (4 bytes read, 60 bits of entropy available)
>[    9.350506] random: systemd: uninitialized urandom read (4 bytes read, 60 bits of entropy available)
>[    9.377280] ttyS0 - failed to request DMA
>[    9.476773] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
>[    9.492964] systemd[1]: Starting Network is Online.
>[    9.498090] systemd[1]: Reached target Network is Online.
>[    9.503670] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    9.511634] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    9.519291] systemd[1]: Expecting device dev-ttyS0.device...
>[    9.525165] systemd[1]: Starting Remote File Systems (Pre).
>[    9.530956] systemd[1]: Reached target Remote File Systems (Pre).
>[    9.537124] systemd[1]: Starting Delayed Shutdown Socket.
>[    9.542792] systemd[1]: Listening on Delayed Shutdown Socket.
>[    9.548605] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    9.555478] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    9.562560] systemd[1]: Starting Encrypted Volumes.
>[    9.567607] systemd[1]: Reached target Encrypted Volumes.
>[    9.573187] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    9.582723] systemd[1]: Starting Journal Socket.
>[    9.587627] systemd[1]: Listening on Journal Socket.
>[    9.593305] systemd[1]: Started Set Up Additional Binary Formats.
>[    9.599747] systemd[1]: Mounted Debug File System.
>[    9.604694] systemd[1]: Mounting POSIX Message Queue File System...
>[    9.640203] systemd[1]: Starting Journal Service...
>[    9.647305] systemd[1]: Started Journal Service.
>[    9.938810] systemd-udevd[951]: starting version 208
>[   10.364659] sm750/718 fb:Frame buffer driver for smi(R) Lynx sm750/sm718 chipsets
>[   10.371514] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[   10.371516] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>[   10.372207] ehci-pci: EHCI PCI platform driver
>[   10.372294] PCI MSI: setup hwirq:11  virq:65
>[   10.372462] ehci-pci 0000:0c:00.1: enabling bus mastering
>[   10.372497] ehci-pci 0000:0c:00.1: EHCI Host Controller
>[   10.372651] ehci-pci 0000:0c:00.1: new USB bus registered, assigned bus number 3
>[   10.372663] ehci-pci 0000:0c:00.1: applying MosChip frame-index workaround
>[   10.372830] ehci-pci 0000:0c:00.1: enabling Mem-Wr-Inval
>[   10.372870] ehci-pci 0000:0c:00.1: irq 65, io mem 0x0e401000
>[   10.400262] ehci-pci 0000:0c:00.1: USB 2.0 started, EHCI 1.00
>[   10.400422] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[   10.400428] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   10.400432] usb usb3: Product: EHCI Host Controller
>[   10.400436] usb usb3: Manufacturer: Linux 4.4.135-cpc313 ehci_hcd
>[   10.400440] usb usb3: SerialNumber: 0000:0c:00.1
>[   10.400847] hub 3-0:1.0: USB hub found
>[   10.400871] hub 3-0:1.0: 1 port detected
>[   10.401219] PCI MSI: setup hwirq:12  virq:66
>[   10.401366] ehci-pci 0000:0c:00.3: enabling bus mastering
>[   10.401390] ehci-pci 0000:0c:00.3: EHCI Host Controller
>[   10.401594] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/apb/spi0@1F04E000[0]' - status (-517)
>[   10.401693] ehci-pci 0000:0c:00.3: new USB bus registered, assigned bus number 4
>[   10.401702] ehci-pci 0000:0c:00.3: applying MosChip frame-index workaround
>[   10.401870] ehci-pci 0000:0c:00.3: enabling Mem-Wr-Inval
>[   10.401910] ehci-pci 0000:0c:00.3: irq 66, io mem 0x0e403000
>[   10.429854] ehci-pci 0000:0c:00.3: USB 2.0 started, EHCI 1.00
>[   10.430033] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
>[   10.430039] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   10.430043] usb usb4: Product: EHCI Host Controller
>[   10.430047] usb usb4: Manufacturer: Linux 4.4.135-cpc313 ehci_hcd
>[   10.430051] usb usb4: SerialNumber: 0000:0c:00.3
>[   10.430479] hub 4-0:1.0: USB hub found
>[   10.430505] hub 4-0:1.0: 1 port detected
>[   10.430826] PCI MSI: setup hwirq:13  virq:67
>[   10.430976] ehci-pci 0000:0c:00.5: enabling bus mastering
>[   10.431000] ehci-pci 0000:0c:00.5: EHCI Host Controller
>[   10.431202] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/apb/spi0@1F04E000[0]' - status (-517)
>[   10.433213] ehci-pci 0000:0c:00.5: new USB bus registered, assigned bus number 5
>[   10.433225] ehci-pci 0000:0c:00.5: applying MosChip frame-index workaround
>[   10.433394] ehci-pci 0000:0c:00.5: enabling Mem-Wr-Inval
>[   10.433438] ehci-pci 0000:0c:00.5: irq 67, io mem 0x0e405000
>[   10.450111] ehci-pci 0000:0c:00.5: USB 2.0 started, EHCI 1.00
>[   10.450262] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>[   10.450267] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   10.450272] usb usb5: Product: EHCI Host Controller
>[   10.450276] usb usb5: Manufacturer: Linux 4.4.135-cpc313 ehci_hcd
>[   10.450280] usb usb5: SerialNumber: 0000:0c:00.5
>[   10.450700] hub 5-0:1.0: USB hub found
>[   10.450725] hub 5-0:1.0: 1 port detected
>[   10.451048] PCI MSI: setup hwirq:14  virq:68
>[   10.451196] ehci-pci 0000:0c:00.7: enabling bus mastering
>[   10.451219] ehci-pci 0000:0c:00.7: EHCI Host Controller
>[   10.451406] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/apb/spi0@1F04E000[0]' - status (-517)
>[   10.451504] ehci-pci 0000:0c:00.7: new USB bus registered, assigned bus number 6
>[   10.451514] ehci-pci 0000:0c:00.7: applying MosChip frame-index workaround
>[   10.451689] ehci-pci 0000:0c:00.7: enabling Mem-Wr-Inval
>[   10.451730] ehci-pci 0000:0c:00.7: irq 68, io mem 0x0e407000
>[   10.469855] ehci-pci 0000:0c:00.7: USB 2.0 started, EHCI 1.00
>[   10.470000] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>[   10.470005] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   10.470009] usb usb6: Product: EHCI Host Controller
>[   10.470013] usb usb6: Manufacturer: Linux 4.4.135-cpc313 ehci_hcd
>[   10.470017] usb usb6: SerialNumber: 0000:0c:00.7
>[   10.470409] hub 6-0:1.0: USB hub found
>[   10.470434] hub 6-0:1.0: 1 port detected
>[   10.471210] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/apb/spi0@1F04E000[0]' - status (-517)
>[   10.473033] m25p80 spi2.0: n25q128a11 (16384 Kbytes)
>[   10.661052] 5 ofpart partitions found on MTD device spi2.0
>[   10.661056] Creating 5 MTD partitions on "spi2.0":
>[   10.661063] 0x000000000000-0x000000080000 : "UBOOT"
>[   10.663226] 0x000000080000-0x000000090000 : "ENVSET"
>[   10.684152] 0x000000090000-0x0000000a0000 : "FIRMWARE"
>[   10.709990] 0x0000000a0000-0x0000000b0000 : "FDT"
>[   10.718686] sm750/718 fb:Driver Version: 1.0.7 
>[   10.718688] sm750/718 fb:Configuration 1:
>[   10.718692] sm750/718 fb:Reg offset 0x0 : value 0xA00000
>[   10.718696] sm750/718 fb:Reg offset 0x4 : value 0x100F07E
>[   10.718699] sm750/718 fb:Reg offset 0x8 : value 0x1F00000
>[   10.718702] sm750/718 fb:Reg offset 0xC : value 0x1765324
>[   10.718705] sm750/718 fb:Reg offset 0x10 : value 0x1765324
>[   10.718708] sm750/718 fb:Reg offset 0x14 : value 0x0
>[   10.718711] sm750/718 fb:Reg offset 0x18 : value 0x0
>[   10.718715] sm750/718 fb:Reg offset 0x1C : value 0x0
>[   10.718718] sm750/718 fb:Reg offset 0x20 : value 0x8
>[   10.718720] sm750/718 fb:Reg offset 0x24 : value 0x0
>[   10.718723] sm750/718 fb:Reg offset 0x28 : value 0x0
>[   10.718727] sm750/718 fb:Reg offset 0x2C : value 0x0
>[   10.718735] sm750/718 fb:PWM:
>[   10.718738] sm750/718 fb:Reg offset 0x40 : value 0x5FFF
>[   10.718742] sm750/718 fb:Reg offset 0x44 : value 0x5FFF
>[   10.718746] sm750/718 fb:Reg offset 0x48 : value 0x5FFF
>[   10.718749] sm750/718 fb:Reg offset 0x4C : value 0x8
>[   10.718750] sm750/718 fb:Configuration 2:
>[   10.718753] sm750/718 fb:Reg offset 0x50 : value 0x0
>[   10.718757] sm750/718 fb:Reg offset 0x54 : value 0x75000A1
>[   10.718760] sm750/718 fb:Reg offset 0x58 : value 0x0
>[   10.718763] sm750/718 fb:Reg offset 0x5C : value 0x20407
>[   10.718766] sm750/718 fb:Reg offset 0x60 : value 0x20407
>[   10.718770] sm750/718 fb:Reg offset 0x64 : value 0x20407
>[   10.718773] sm750/718 fb:Reg offset 0x68 : value 0x20408
>[   10.718776] sm750/718 fb:Reg offset 0x6C : value 0x0
>[   10.718779] sm750/718 fb:Reg offset 0x70 : value 0x2045C
>[   10.718783] sm750/718 fb:no options
>[   10.718785] sm750/718 fb:--+ output driver configuration information +--
>[   10.718787] sm750/718 fb:screen mode : default mode 
>[   10.718789] sm750/718 fb:2d accel : on 
>[   10.718791] sm750/718 fb:output : simul,crt1 + crt2
>[   10.718792] sm750/718 fb:--+ end +--
>[   10.718930] sm750/718 fb:pci_enable_device
>[   10.718933] sm750/718 fb:MMIO base is 0xAC000000
>[   10.773815] 0x0000000b0000-0x000001000000 : "MULTIIMAGE"
>[   10.781261] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/apb/spi0@1F04E000[0]' - status (-517)
>[   11.277441] sm750/718 fb:sm750fb_create_share
>[   11.277445] sm750/718 fb:framebuffer_alloc
>[   11.277482] sm750/718 fb:hw_init_chip
>[   11.468523] random: nonblocking pool is initialized
>[   11.561247] ddk750_setLogicalDispOutput output 0
>[   11.561273] sm750/718 fb:After tried 0 times,Read 0x80000 == 00010000
>[   11.561301] ddk750_setLogicalDispOutput output 3
>[   11.761508] sm750/718 fb:After tried 0 times,Read 0x80000 == 02017905
>[   11.761591] Console: switching to colour frame buffer device 80x30
>[   11.792120] sm750/718 fb:Register_framebuffer done.
>[   11.800343] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/apb/spi0@1F04E000[0]' - status (-517)
>[   11.859468] EXT4-fs (sda1): re-mounted. Opts: (null)
>[   12.005311] EXT4-fs error (device sda1): ext4_mb_generate_buddy:758: group 5, block bitmap and bg descriptor inconsistent: 18504 vs 18507 free clusters
>[   12.020142] systemd-journald[938]: Received request to flush runtime journal from PID 1
>[   12.125577] EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsystem
>[   12.143800] EXT4-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
>[   12.365919] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
>[   12.886913] EXT4-fs error (device sda1): ext4_mb_generate_buddy:758: group 8, block bitmap and bg descriptor inconsistent: 28595 vs 28592 free clusters
>root@cpc516:~#

Actions: View

Attachments on bug 36012: 7982 | 7983 | 7984 | 7985