Attachment 8510 Details for Bug 37737 – dmesg log

dmesg log

dmesg-mdadm-mptsas-order.log (text/x-log), 8.73 KB, created by Vitaly Lipatov on 2020-01-08 21:56:07 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Vitaly Lipatov

Created: 2020-01-08 21:56:07 MSK

Size: 8.73 KB

patch

obsolete

>[    0.569182] Run /init as init process
>[    0.815831] udevd[419]: Starting version v242-alt12
>[    0.871778] SCSI subsystem initialized
>[    0.873314] Fusion MPT base driver 3.04.20
>[    0.873314] Copyright (c) 1999-2008 LSI Corporation
>[    0.876307] libata version 3.00 loaded.
>[    0.877337] Fusion MPT SAS Host driver 3.04.20
>[    0.877494] mptbase: ioc0: Initiating bringup
>[    0.877744] ahci 0000:03:00.1: version 3.0
>[    0.877863] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
>[    0.877894] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
>[    0.877896] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst.
>[    0.879446] scsi host0: ahci
>[    0.879520] scsi host1: ahci
>[    0.879590] scsi host2: ahci
>[    0.879668] scsi host3: ahci
>[    0.879728] scsi host4: ahci
>[    0.879782] scsi host5: ahci
>[    0.880503] scsi host6: ahci
>[    0.880561] scsi host7: ahci
>[    0.880580] ata1: SATA max UDMA/133 abar m131072@0xfc980000 port 0xfc980100 irq 57
>[    0.880581] ata2: SATA max UDMA/133 abar m131072@0xfc980000 port 0xfc980180 irq 57
>[    0.880582] ata3: DUMMY
>[    0.880582] ata4: DUMMY
>[    0.880583] ata5: SATA max UDMA/133 abar m131072@0xfc980000 port 0xfc980300 irq 57
>[    0.880584] ata6: SATA max UDMA/133 abar m131072@0xfc980000 port 0xfc980380 irq 57
>[    0.880585] ata7: DUMMY
>[    0.880585] ata8: DUMMY
>[    0.880688] ahci 0000:25:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
>[    0.880689] ahci 0000:25:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part.
>[    0.880789] scsi host8: ahci
>[    0.880810] ata9: SATA max UDMA/133 abar m4096@0xfcd08000 port 0xfcd08100 irq 59
>[    1.186677] ata9: SATA link down (SStatus 0 SControl 300)
>[    1.225243] ioc0: LSISAS1068E B3: Capabilities={Initiator}
>[    1.300258] tsc: Refined TSC clocksource calibration: 3693.062 MHz
>[    1.300270] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a7777116fa, max_idle_ns: 881590883556 ns
>[    1.300464] clocksource: Switched to clocksource tsc
>[    1.340256] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.341237] ata1.00: ATA-11: WDC WDS500G2B0A-00SM50, X61190WD, max UDMA/133
>[    1.341238] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
>[    1.342713] ata1.00: configured for UDMA/133
>[    1.342836] scsi 0:0:0:0: Direct-Access     ATA      WDC WDS500G2B0A- 90WD PQ: 0 ANSI: 5
>[    1.804258] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.805262] ata2.00: ATA-11: WDC WDS500G2B0A-00SM50, X61190WD, max UDMA/133
>[    1.805262] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
>[    1.806734] ata2.00: configured for UDMA/133
>[    1.806846] scsi 1:0:0:0: Direct-Access     ATA      WDC WDS500G2B0A- 90WD PQ: 0 ANSI: 5
>[    2.268242] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.268983] ata5.00: ATA-10: TS512GSSD230S, 2200S8LI, max UDMA/133
>[    2.268985] ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA
>[    2.269138] ata5.00: READ LOG DMA EXT failed, trying PIO
>[    2.269139] ata5.00: failed to get Identify Device Data, Emask 0x40
>[    2.269141] ata5.00: failed to set xfermode (err_mask=0x40)
>[    8.100241] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    8.101375] ata5.00: configured for UDMA/133
>[    8.102133] scsi 4:0:0:0: Direct-Access     ATA      TS512GSSD230S    S8LI PQ: 0 ANSI: 5
>[    8.564250] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    8.566158] ata6.00: ATA-8: WDC WD1001FALS-00E3A0, 05.01D05, max UDMA/133
>[    8.566159] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
>[    8.567926] ata6.00: configured for UDMA/133
>[    8.568518] scsi 5:0:0:0: Direct-Access     ATA      WDC WD1001FALS-0 1D05 PQ: 0 ANSI: 5
>[    8.570999] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    8.571007] sd 0:0:0:0: [sda] Write Protect is off
>[    8.571008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    8.571010] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    8.571016] sd 1:0:0:0: [sdb] Write Protect is off
>[    8.571017] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    8.571019] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    8.571019] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[    8.571025] sd 5:0:0:0: [sdd] Write Protect is off
>[    8.571026] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>[    8.571027] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    8.571035] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    8.571036] sd 4:0:0:0: [sdc] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
>[    8.571041] sd 4:0:0:0: [sdc] Write Protect is off
>[    8.571042] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    8.571051] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    8.572231] sd 4:0:0:0: [sdc] Attached SCSI disk
>[    8.575629]  sdb: sdb1
>[    8.575668]  sda: sda1 sda2 sda3
>[    8.575753] sd 1:0:0:0: [sdb] Attached SCSI disk
>[    8.575838] sd 0:0:0:0: [sda] Attached SCSI disk
>[    8.598999]  sdd: sdd1 sdd2 sdd3
>[    8.599404] sd 5:0:0:0: [sdd] Attached SCSI disk
>[    8.603400] random: fast init done
>[    8.812807] md/raid1:md10: active with 1 out of 2 mirrors
>[    8.813668] md10: detected capacity change from 0 to 500106723328
>[    8.814505] md/raid1:md4: active with 1 out of 2 mirrors
>[    8.815395] md4: detected capacity change from 0 to 119965941760
>[    8.816158] md/raid1:md5: active with 1 out of 2 mirrors
>[    8.817207] md5: detected capacity change from 0 to 239922118656
>[    8.817910] md/raid1:md6: active with 1 out of 2 mirrors
>[    8.819218] md6: detected capacity change from 0 to 139752112128
>[    8.819950] md/raid1:md1: active with 1 out of 2 mirrors
>[    8.819957] md1: detected capacity change from 0 to 10001842176
>[   10.002594] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
>[   10.005691] md/raid1:md2: active with 1 out of 2 mirrors
>[   10.047040] md2: detected capacity change from 0 to 980198293504
>[   13.040681] scsi host9: ioc0: LSISAS1068E B3, FwRev=01210000h, Ports=1, MaxQ=483, IRQ=34
>[   13.080163] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 6, phy 0, sas_addr 0x857f3322a091938d
>[   13.085145] scsi 9:0:0:0: Direct-Access     ATA      WDC WD1001FALS-0 1D05 PQ: 0 ANSI: 5
>[   13.085489] scsi 9:0:0:0: Power-on or device reset occurred
>[   13.095582] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 4, phy 1, sas_addr 0x73853822a4a69892
>[   13.100668] scsi 9:0:1:0: Direct-Access     ATA      WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
>[   13.101408] scsi 9:0:1:0: Power-on or device reset occurred
>[   13.103662] sd 9:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[   13.110271] sd 9:0:0:0: [sde] Write Protect is off
>[   13.110273] sd 9:0:0:0: [sde] Mode Sense: 73 00 00 08
>[   13.111726] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 5, phy 2, sas_addr 0x98913631baadc289
>[   13.116218] sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   13.118857] scsi 9:0:2:0: Direct-Access     ATA      WDC WD3000HLFS-0 5G04 PQ: 0 ANSI: 5
>[   13.119202] scsi 9:0:2:0: Power-on or device reset occurred
>[   13.120595] sd 9:0:1:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[   13.126597] sd 9:0:1:0: [sdf] Write Protect is off
>[   13.126598] sd 9:0:1:0: [sdf] Mode Sense: 73 00 00 08
>[   13.130515] sd 9:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   13.132557] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 7, phy 3, sas_addr 0x99853f23a38e878e
>[   13.137277] scsi 9:0:3:0: Direct-Access     ATA      WDC WD5002ABYS-0 3B03 PQ: 0 ANSI: 5
>[   13.137717] scsi 9:0:3:0: Power-on or device reset occurred
>[   13.145494] sd 9:0:2:0: [sdg] 586072368 512-byte logical blocks: (300 GB/279 GiB)
>[   13.150213] random: crng init done
>[   13.152003] sd 9:0:3:0: [sdh] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[   13.153015] sd 9:0:2:0: [sdg] Write Protect is off
>[   13.153015] sd 9:0:2:0: [sdg] Mode Sense: 73 00 00 08
>[   13.156803]  sde: sde1 sde2 sde3
>[   13.158587] sd 9:0:3:0: [sdh] Write Protect is off
>[   13.158588] sd 9:0:3:0: [sdh] Mode Sense: 73 00 00 08
>[   13.159070] sd 9:0:2:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   13.161628] sd 9:0:3:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   13.173033]  sdf: sdf1 sdf2 sdf3 sdf4
>[   13.181900] sd 9:0:0:0: [sde] Attached SCSI disk
>[   13.193268] sd 9:0:1:0: [sdf] Attached SCSI disk
>[   13.206836] sd 9:0:3:0: [sdh] Attached SCSI disk
>[   13.212860]  sdg: sdg1 sdg2 sdg3 sdg4 < sdg5 sdg6 >
>[   13.239065] sd 9:0:2:0: [sdg] Attached SCSI disk

Actions: View

Attachments on bug 37737: 8510 | 8652 | 8825