Attachment 8652 Details for Bug 37737 – dmesg успешной загрузки

dmesg успешной загрузки

dmesg-mtpsas.log (text/x-log), 9.88 KB, created by Vitaly Lipatov on 2020-03-06 14:27:14 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Vitaly Lipatov

Created: 2020-03-06 14:27:14 MSK

Size: 9.88 KB

patch

obsolete

>[    0.721450] Run /init as init process
>[    1.006988] udevd[491]: Starting version v243.7-alt1
>[    1.007505] udevd[493]: /etc/udev/rules.d/50-udev-default.rules:24 The line takes no effect, ignoring.
>[    1.007509] udevd[493]: /etc/udev/rules.d/50-udev-default.rules:25 The line takes no effect, ignoring.
>[    1.007515] udevd[493]: /etc/udev/rules.d/50-udev-default.rules:29 The line takes no effect, ignoring.
>[    1.007519] udevd[493]: /etc/udev/rules.d/50-udev-default.rules:32 The line takes no effect, ignoring.
>[    1.007522] udevd[493]: /etc/udev/rules.d/50-udev-default.rules:33 The line takes no effect, ignoring.
>[    1.007524] udevd[493]: /etc/udev/rules.d/50-udev-default.rules:34 The line takes no effect, ignoring.
>[    1.007526] udevd[493]: /etc/udev/rules.d/50-udev-default.rules:35 The line takes no effect, ignoring.
>[    1.007529] udevd[493]: /etc/udev/rules.d/50-udev-default.rules:36 The line takes no effect, ignoring.
>[    1.007531] udevd[493]: /etc/udev/rules.d/50-udev-default.rules:37 The line takes no effect, ignoring.
>[    1.068815] SCSI subsystem initialized
>[    1.071269] Fusion MPT base driver 3.04.20
>[    1.071271] Copyright (c) 1999-2008 LSI Corporation
>[    1.075030] libata version 3.00 loaded.
>[    1.076543] Fusion MPT SAS Host driver 3.04.20
>[    1.077499] ahci 0000:03:00.1: version 3.0
>[    1.077620] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
>[    1.077652] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
>[    1.077653] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
>[    1.078101] mptbase: ioc0: Initiating bringup
>[    1.078113] scsi host0: ahci
>[    1.078240] scsi host1: ahci
>[    1.078326] scsi host2: ahci
>[    1.078408] scsi host3: ahci
>[    1.078489] scsi host4: ahci
>[    1.078588] scsi host5: ahci
>[    1.078675] scsi host6: ahci
>[    1.078773] scsi host7: ahci
>[    1.078807] ata1: SATA max UDMA/133 abar m131072@0xfc980000 port 0xfc980100 irq 57
>[    1.078808] ata2: SATA max UDMA/133 abar m131072@0xfc980000 port 0xfc980180 irq 57
>[    1.078809] ata3: DUMMY
>[    1.078809] ata4: DUMMY
>[    1.078811] ata5: SATA max UDMA/133 abar m131072@0xfc980000 port 0xfc980300 irq 57
>[    1.078812] ata6: SATA max UDMA/133 abar m131072@0xfc980000 port 0xfc980380 irq 57
>[    1.078812] ata7: DUMMY
>[    1.078812] ata8: DUMMY
>[    1.078927] ahci 0000:25:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
>[    1.078929] ahci 0000:25:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
>[    1.079051] scsi host8: ahci
>[    1.079092] ata9: SATA max UDMA/133 abar m4096@0xfcd08000 port 0xfcd08100 irq 59
>[    1.164040] NET: Registered protocol family 10
>[    1.164199] Segment Routing with IPv6
>[    1.388475] ata9: SATA link down (SStatus 0 SControl 300)
>[    1.425222] ioc0: LSISAS1068E B3: Capabilities={Initiator}
>[    1.495871] tsc: Refined TSC clocksource calibration: 3693.062 MHz
>[    1.495879] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a7777116fa, max_idle_ns: 881590883556 ns
>[    1.495930] clocksource: Switched to clocksource tsc
>[    1.543249] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.544321] ata1.00: ATA-11: WDC WDS500G2B0A-00SM50, X61190WD, max UDMA/133
>[    1.544322] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
>[    1.545870] ata1.00: configured for UDMA/133
>[    1.545989] scsi 0:0:0:0: Direct-Access     ATA      WDC WDS500G2B0A- 90WD PQ: 0 ANSI: 5
>[    1.548654] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    1.548660] sd 0:0:0:0: [sda] Write Protect is off
>[    1.548661] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.548671] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.548917]  sda: sda1 sda2 sda3
>[    1.549069] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.007252] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.008326] ata2.00: ATA-11: WDC WDS500G2B0A-00SM50, X61190WD, max UDMA/133
>[    2.008328] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
>[    2.009914] ata2.00: configured for UDMA/133
>[    2.010016] scsi 1:0:0:0: Direct-Access     ATA      WDC WDS500G2B0A- 90WD PQ: 0 ANSI: 5
>[    2.010200] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    2.010206] sd 1:0:0:0: [sdb] Write Protect is off
>[    2.010207] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.010233] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.010520]  sdb: sdb1
>[    2.010668] sd 1:0:0:0: [sdb] Attached SCSI disk
>[    2.021026] random: fast init done
>[    2.471238] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.471963] ata5.00: ATA-10: TS512GSSD230S, 2200S8LI, max UDMA/133
>[    2.471965] ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA
>[    2.472118] ata5.00: READ LOG DMA EXT failed, trying PIO
>[    2.472119] ata5.00: failed to get Identify Device Data, Emask 0x40
>[    2.472121] ata5.00: failed to set xfermode (err_mask=0x40)
>[    8.103236] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    8.104374] ata5.00: configured for UDMA/133
>[    8.104485] scsi 4:0:0:0: Direct-Access     ATA      TS512GSSD230S    S8LI PQ: 0 ANSI: 5
>[    8.105371] sd 4:0:0:0: [sdc] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
>[    8.105380] sd 4:0:0:0: [sdc] Write Protect is off
>[    8.105381] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    8.105396] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    8.105688]  sdc: sdc1
>[    8.105843] sd 4:0:0:0: [sdc] Attached SCSI disk
>[    8.125946] md/raid1:md10: active with 2 out of 2 mirrors
>[    8.128912] md10: detected capacity change from 0 to 500106723328
>[    8.567249] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    8.569556] ata6.00: ATA-8: WDC WD1001FALS-00E3A0, 05.01D05, max UDMA/133
>[    8.569557] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
>[    8.571350] ata6.00: configured for UDMA/133
>[    8.571478] scsi 5:0:0:0: Direct-Access     ATA      WDC WD1001FALS-0 1D05 PQ: 0 ANSI: 5
>[    8.571650] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[    8.571658] sd 5:0:0:0: [sdd] Write Protect is off
>[    8.571659] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>[    8.571672] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    8.598135]  sdd: sdd1 sdd2 sdd3
>[    8.598494] sd 5:0:0:0: [sdd] Attached SCSI disk
>[   13.240888] scsi host9: ioc0: LSISAS1068E B3, FwRev=01210000h, Ports=1, MaxQ=483, IRQ=34
>[   13.281021] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 6, phy 0, sas_addr 0x857f3322a091938d
>[   13.285664] scsi 9:0:0:0: Direct-Access     ATA      WDC WD1001FALS-0 1D05 PQ: 0 ANSI: 5
>[   13.286008] scsi 9:0:0:0: Power-on or device reset occurred
>[   13.295953] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 4, phy 1, sas_addr 0x73853822a4a69892
>[   13.301292] scsi 9:0:1:0: Direct-Access     ATA      WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
>[   13.302634] scsi 9:0:1:0: Power-on or device reset occurred
>[   13.304213] sd 9:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[   13.311598] sd 9:0:0:0: [sde] Write Protect is off
>[   13.311599] sd 9:0:0:0: [sde] Mode Sense: 73 00 00 08
>[   13.313544] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 5, phy 2, sas_addr 0x98913631baadc289
>[   13.317857] sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   13.320605] scsi 9:0:2:0: Direct-Access     ATA      WDC WD3000HLFS-0 5G04 PQ: 0 ANSI: 5
>[   13.321372] scsi 9:0:2:0: Power-on or device reset occurred
>[   13.322893] sd 9:0:1:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[   13.329090] sd 9:0:1:0: [sdf] Write Protect is off
>[   13.329091] sd 9:0:1:0: [sdf] Mode Sense: 73 00 00 08
>[   13.334510] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 7, phy 3, sas_addr 0x99853f23a38e878e
>[   13.335806] sd 9:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   13.339666] scsi 9:0:3:0: Direct-Access     ATA      WDC WD5002ABYS-0 3B03 PQ: 0 ANSI: 5
>[   13.340457] scsi 9:0:3:0: Power-on or device reset occurred
>[   13.346070] sd 9:0:2:0: [sdg] 586072368 512-byte logical blocks: (300 GB/279 GiB)
>[   13.352011]  sde: sde1 sde2 sde3
>[   13.353294] sd 9:0:2:0: [sdg] Write Protect is off
>[   13.353295] sd 9:0:2:0: [sdg] Mode Sense: 73 00 00 08
>[   13.354735] sd 9:0:3:0: [sdh] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[   13.359135] sd 9:0:2:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   13.361289] sd 9:0:3:0: [sdh] Write Protect is off
>[   13.361291] sd 9:0:3:0: [sdh] Mode Sense: 73 00 00 08
>[   13.364319] sd 9:0:3:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   13.375422] sd 9:0:0:0: [sde] Attached SCSI disk
>[   13.378015]  sdf: sdf1 sdf2 sdf3 sdf4
>[   13.391838]  sdg: sdg1
>[   13.397881] sd 9:0:1:0: [sdf] Attached SCSI disk
>[   13.410019] sd 9:0:3:0: [sdh] Attached SCSI disk
>[   13.417674] sd 9:0:2:0: [sdg] Attached SCSI disk
>[   13.444186] random: crng init done
>[   13.571074] md/raid1:md4: active with 2 out of 2 mirrors
>[   13.584058] md/raid1:md1: active with 3 out of 3 mirrors
>[   13.584070] md1: detected capacity change from 0 to 10001842176
>[   13.651999] md4: detected capacity change from 0 to 119965941760
>[   13.655505] md/raid1:md5: active with 2 out of 2 mirrors
>[   13.657517] md/raid1:md3: active with 2 out of 2 mirrors
>[   13.671951] md/raid1:md2: active with 2 out of 2 mirrors
>[   13.699337] md5: detected capacity change from 0 to 239922118656
>[   13.714068] md3: detected capacity change from 0 to 399330967552
>[   13.717199] md/raid1:md6: active with 2 out of 2 mirrors
>[   13.734410] md2: detected capacity change from 0 to 980198293504
>[   13.754421] md6: detected capacity change from 0 to 139752112128
>[   13.815458] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)

Actions: View

Attachments on bug 37737: 8510 | 8652 | 8825