Attachment 1558 Details for Bug 9859 – вывод dmesg на ядре 2.6.16

вывод dmesg на ядре 2.6.16

dmesg.2.6.16-wks26-up-alt8.txt (text/plain), 14.04 KB, created by Yury Aliaev on 2006-08-08 13:27:21 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Yury Aliaev

Created: 2006-08-08 13:27:21 MSD

Size: 14.04 KB

patch

obsolete

>Linux version 2.6.16-wks26-up-alt8 (builder@xeon.office.altlinux.ru) (gcc version 4.1.1 20060629 (ALT Linux, build 4.1.1-alt4)) #1 PREEMPT Tue Jul 11 02:45:48 MSD 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000007fd0000 (usable)
> BIOS-e820: 0000000007fd0000 - 0000000007fdf000 (ACPI data)
> BIOS-e820: 0000000007fdf000 - 0000000007fe0000 (ACPI NVS)
> BIOS-e820: 0000000007fe0000 - 0000000008000000 (reserved)
> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>127MB LOWMEM available.
>On node 0 totalpages: 32720
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 28624 pages, LIFO batch:7
>  HighMem zone: 0 pages, LIFO batch:0
>DMI 2.2 present.
>ACPI: RSDP (v000 IBM                                   ) @ 0x000fd6e0
>ACPI: RSDT (v001 IBM    TP600R   0x00000001  0x00000000) @ 0x07fd0000
>ACPI: FADT (v001 IBM    TP600R   0x00000001  0x00000000) @ 0x07fd0100
>ACPI: DSDT (v001 IBM    TP600R   0x00000100 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0xef08
>Allocating PCI resources starting at 10000000 (gap: 08000000:f7fe0000)
>Built 1 zonelists
>Kernel command line: BOOT_IMAGE=2616-wks26-up-8 ro root=305
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (01101000)
>Enabling fast FPU save and restore... done.
>Initializing CPU#0
>PID hash table entries: 512 (order: 9, 8192 bytes)
>Detected 397.173 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour VGA+ 80x50
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 126460k/130880k available (1439k kernel code, 3876k reserved, 566k data, 168k init, 0k highmem, 0k BadRAM)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 795.08 BogoMIPS (lpj=397543)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: Intel Mobile Pentium II stepping 0a
>Checking 'hlt' instruction... OK.
>ACPI: Looking for DSDT in initrd... not found.
>ACPI: setting ELCR to 0200 (from 0800)
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 146k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI quirk: region ef00-ef3f claimed by PIIX4 ACPI
>PCI quirk: region efa0-efaf claimed by PIIX4 SMB
>PIIX4 devres B PIO at 02f8-02ff
>PIIX4 devres C PIO at 15e8-15ef
>PIIX4 devres E PIO at 0538-053f
>PIIX4 devres G PIO at 0130-013f
>PIIX4 devres I PIO at 002e-002f
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
>ACPI: Power Resource [PSIO] (on)
>ACPI: Embedded Controller [EC0] (gpe 9) interrupt mode.
>ACPI: Power Resource [PFN0] (off)
>ACPI: Power Resource [PVID] (on)
>ACPI: Power Resource [PRSD] (on)
>ACPI: Power Resource [PDCK] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 18 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:0d: ioport range 0x15e0-0x15ef has been reserved
>pnp: 00:0d: ioport range 0xef00-0xef3f could not be reserved
>pnp: 00:0d: ioport range 0xefa0-0xefaf has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: 70000000-dfffffff
>  PREFETCH window: e0000000-f7ffffff
>PCI: Bus 2, cardbus bridge: 0000:00:02.0
>  IO window: 00001000-000010ff
>  IO window: 00001400-000014ff
>  PREFETCH window: 10000000-11ffffff
>  MEM window: 12000000-13ffffff
>PCI: Bus 6, cardbus bridge: 0000:00:02.1
>  IO window: 00001800-000018ff
>  IO window: 00001c00-00001cff
>  PREFETCH window: 14000000-15ffffff
>  MEM window: 16000000-17ffffff
>ACPI: PCI Interrupt Link [LNKA] disabled and referenced, BIOS bug.
>ACPI: PCI Interrupt Link [LNKA] BIOS reported IRQ 0, using IRQ 9
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
>ACPI: PCI Interrupt Link [LNKB] disabled and referenced, BIOS bug.
>ACPI: PCI Interrupt Link [LNKB] BIOS reported IRQ 0, using IRQ 9
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
>audit: initializing netlink socket (disabled)
>audit(1154733771.814:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>TCP bic registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>Suspend2 Core.
>Suspend2 Compression Driver loading.
>Suspend2 Encryption Driver loading.
>Suspend2 Swap Writer loading.
>ACPI wakeup devices: 
>LID0 SLPB PCI0 UAR1 MWV0 BAT0 USB0 
>ACPI: (supports S0 S1 S3 S4 S5)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>RAMDISK: Compressed image found at block 0
>VFS: Mounted root (romfs filesystem) readonly.
>input: AT Translated Set 2 keyboard as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:07.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: IBM-DCXA-210000, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: TOSHIBA DVD-ROM SD-C2102, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 19640880 sectors (10056 MB) w/420KiB Cache, CHS=19485/16/63, UDMA(33)
>hda: cache flushes not supported
> hda: hda1 hda2 < hda5 hda6 hda7 >
>Suspend2 2.2.5: You need to use a resume2= command line parameter to tell Suspend2 where to look for an image.
>Suspend2 2.2.5: Resume2 parameter is empty. Suspending will be disabled.
>Suspend2 2.2.5: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending.
>VFS: Mounted root (ext2 filesystem) readonly.
>Trying to move old root to /initrd ... /initrd does not exist. Ignored.
>Unmounting old root
>Trying to free ramdisk memory ... okay
>Freeing unused kernel memory: 168k freed
>Executing init=/sbin/init
>Adding 362840k swap on /dev/hda6.  Priority:-1 extents:1 across:362840k
>Real Time Clock Driver v1.12ac
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
>neofb: mapped io at c8980000
>Autodetected internal display
>Panel is a 1024x768 color TFT display
>neofb: mapped framebuffer at c8c00000
>neofb v0.4.2: 2560kB VRAM, using 1024x768, 48.364kHz, 60Hz
>Console: switching to colour frame buffer device 128x48
>fb0: MagicGraph 256AV frame buffer device
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>subfs 0.9
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
>Yenta: CardBus bridge found at 0000:00:02.0 [1014:00eb]
>Yenta: Enabling burst memory read transactions
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:02.0, mfunc 0xfba97543, devctl 0x62
>Yenta TI: socket 0000:00:02.0 probing PCI interrupt failed, trying to fix
>Yenta TI: socket 0000:00:02.0 no PCI interrupts. Fish. Please report.
>Yenta: no PCI IRQ, CardBus support disabled for this socket.
>Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
>Yenta: ISA IRQ mask 0x0498, PCI irq 0
>Socket status: 30000006
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
>Yenta: CardBus bridge found at 0000:00:02.1 [1014:00eb]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:02.1, mfunc 0xfba97543, devctl 0x62
>Yenta TI: socket 0000:00:02.1 probing PCI interrupt failed, trying to fix
>Yenta TI: socket 0000:00:02.1 no PCI interrupts. Fish. Please report.
>Yenta: no PCI IRQ, CardBus support disabled for this socket.
>Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
>Yenta: ISA IRQ mask 0x0498, PCI irq 0
>Socket status: 30000006
>pcmcia: Detected deprecated PCMCIA ioctl usage.
>pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
>pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
>NET: Registered protocol family 23
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt Link [LNKD] disabled and referenced, BIOS bug.
>ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 10
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>irq 10: nobody cared (try booting with the "irqpoll" option)
> [<c013a793>] __report_bad_irq+0x2b/0x69
> [<c013a98b>] note_interrupt+0x1ba/0x1e7
> [<c013a2c2>] handle_IRQ_event+0x17/0x4c
> [<c013a2ce>] handle_IRQ_event+0x23/0x4c
> [<c013a389>] __do_IRQ+0x92/0xd1
> [<c01050e2>] do_IRQ+0x46/0x53
> [<c0103a7a>] common_interrupt+0x1a/0x20
> [<c013007b>] suspend_mark_pages_for_pageset2+0x235/0x2c1
> [<c011ba27>] __do_softirq+0x2c/0x7f
> [<c011ba9c>] do_softirq+0x22/0x26
> [<c011bb5a>] irq_exit+0x25/0x30
> [<c01050e7>] do_IRQ+0x4b/0x53
> [<c0103a7a>] common_interrupt+0x1a/0x20
> [<c013a52a>] setup_irq+0xbb/0xfb
> [<c8be4451>] usb_hcd_irq+0x0/0x4f [usbcore]
> [<c013a5d9>] request_irq+0x6f/0x8b
> [<c8be40c7>] usb_add_hcd+0x1e7/0x50b [usbcore]
> [<c8beb6dc>] usb_hcd_pci_probe+0x1e5/0x279 [usbcore]
> [<c01fb438>] __driver_attach+0x0/0x59
> [<c01aadfb>] pci_device_probe+0x36/0x57
> [<c01fb39b>] driver_probe_device+0x3f/0x88
> [<c01fb46e>] __driver_attach+0x36/0x59
> [<c01faefc>] bus_for_each_dev+0x33/0x55
> [<c01fb308>] driver_attach+0x11/0x13
> [<c01fb438>] __driver_attach+0x0/0x59
> [<c01fac26>] bus_add_driver+0x64/0xfa
> [<c01aaf58>] __pci_register_driver+0x59/0x75
> [<c8804091>] uhci_hcd_init+0x91/0xce [uhci_hcd]
> [<c012cd4b>] sys_init_module+0x137b/0x1502
> [<c013d55d>] generic_file_read+0x98/0xac
> [<c01464d0>] unmap_vmas+0x438/0x492
> [<c0147adc>] free_pgtables+0x69/0x78
> [<c0126e43>] autoremove_wake_function+0x0/0x2d
> [<c0148869>] unmap_region+0xa5/0xed
> [<c01563d5>] vfs_read+0x9f/0x144
> [<c0156769>] sys_read+0x3c/0x63
> [<c0102b09>] syscall_call+0x7/0xb
>handlers:
>[<c8be4451>] (usb_hcd_irq+0x0/0x4f [usbcore])
>Disabling IRQ #10
>uhci_hcd 0000:00:07.2: irq 10, io base 0x00008400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>IBM TrackPoint firmware: 0x0b, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input1
>ts: Compaq touchscreen protocol output
>hdc: ATAPI 20X DVD-ROM drive, 128kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.20
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID0]
>ACPI: Sleep Button (CM) [SLPB]
>input: PC Speaker as /class/input/input2
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (58 C)
>ACPI: Thermal Zone [THM2] (35 C)
>ACPI: Thermal Zone [THM6] (31 C)
>ACPI: Thermal Zone [THM7] (27 C)
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: unable to find recovery directory /var/lib/nfs/v4recovery
>NFSD: starting 90-second grace period
>get_unused_fd: slot 65 not NULL!
>get_unused_fd: slot 65 not NULL!

Actions: View

Attachments on bug 9859: 1558 | 1559 | 1560 | 1561