Attachment 1993 Details for Bug 11881 – dmesg GForce 2 MX 4000, нормальная загрузка без splash

dmesg GForce 2 MX 4000, нормальная загрузка без splash

dmesg.log (text/plain), 23.89 KB, created by Roman Savochenko on 2007-05-25 10:03:47 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Roman Savochenko

Created: 2007-05-25 10:03:47 MSD

Size: 23.89 KB

patch

obsolete

>Linux version 2.6.18-wks-smp-alt2 (builder@mash.office.altlinux.ru) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Sun Feb 25 18:43:34 MSK 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
> BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>255MB LOWMEM available.
>found SMP MP-table at 000f50a0
>On node 0 totalpages: 65520
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 61424 pages, LIFO batch:15
>DMI 2.3 present.
>ACPI: RSDP (v000 Nvidia                                ) @ 0x000f6a30
>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x0fff3000
>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x0fff3040
>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x0fff7dc0
>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
>Detected 2009.122 MHz processor.
>Built 1 zonelists.  Total pages: 65520
>Kernel command line: BOOT_IMAGE=ALTLinux ro root=UUID=939391df-7972-4c82-b425-206706909f0f panic=30
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>spurious 8259A interrupt: IRQ7.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 255440k/262080k available (1621k kernel code, 5912k reserved, 626k data, 192k init, 0k highmem, 0k BadRAM)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4019.53 BogoMIPS (lpj=2009766)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 16k freed
>checking if image is initramfs... it is
>Freeing initrd memory: 469k freed
>ACPI: Core revision 20060707
>ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist.
>CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 08
>Total of 1 processors activated (4019.53 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Brought up 1 CPUs
>migration_cost=0
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfac40, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:02:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: Power Resource [ISAV] (on)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:00: ioport range 0x1400-0x147f has been reserved
>pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
>pnp: 00:00: ioport range 0x1800-0x187f has been reserved
>pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
>PCI: Bridge: 0000:00:0a.0
>  IO window: c000-cfff
>  MEM window: c0000000-dfffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: ec000000-eeffffff
>  PREFETCH window: e8000000-ebffffff
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
>TCP: Hash tables configured (established 8192 bind 4096)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1180005449.551:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>vesafb: framebuffer at 0xe8000000, mapped to 0xc0880000, using 3072k, total 65536k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at c000:f360
>vesafb: pmi: set display start = b00cf396, set palette = b00cf400
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>Suspend2 Core.
>Time: tsc clocksource has been installed.
>Suspend2 Userspace UI Support module loaded.
>Suspend2 Checksumming module loaded.
>Suspend2 Userspace Storage Manager module loaded.
>Suspend2 Compressor module loaded.
>Suspend2 Encryptor module loaded.
>Suspend2 Block I/O module loaded.
>Suspend2 Swap Allocator module loaded.
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 192k freed
>Executing init=/init
>input: AT Translated Set 2 keyboard as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
>NFORCE3-150: chipset revision 165
>NFORCE3-150: not 100% native mode: will probe irqs later
>NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: SAMSUNG SP1213N, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 512KiB
>hda: Host Protected Area detected.
>	current capacity is 234490943 sectors (120059 MB)
>	native  capacity is 234493056 sectors (120060 MB)
>hda: Host Protected Area disabled.
>hda: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 hda16 hda17 >
>Probing IDE interface ide1...
>hdc: Optiarc DVD RW AD-5170A, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ReiserFS: hda6: found reiserfs format "3.6" with standard journal
>ReiserFS: hda6: using ordered data mode
>ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda6: checking transaction log (hda6)
>ReiserFS: hda6: Using r5 hash to sort names
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected AGP bridge 0
>agpgart: Setting up Nforce3 AGP.
>agpgart: AGP aperture is 128M @ 0xe0000000
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>Intel 810 + AC97 Audio, version 1.01, 19:12:09 Feb 25 2007
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>i810: NVIDIA nForce Audio found at IO 0xdc00 and 0xd800, MEM 0x0000 and 0x0000, IRQ 177
>input: PC Speaker as /class/input/input1
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
>Uniform CD-ROM driver Revision: 3.20
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>Real Time Clock Driver v1.12ac
>ieee1394: Initialized config rom entry `ip1394'
>arcnet loaded.
>arcnet: COM20020 chipset support (by David Woodhouse et al.)
>arcnet: COM20020 PCI support
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>i810_audio: Audio Controller supports 6 channels.
>i810_audio: Defaulting to base 2 channel mode.
>i810_audio: Resetting connection 0
>ac97_codec: AC97 Audio codec, id: ALG128 (Unknown)
>i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 185, io mem 0xef003000
>input: GenPS/2 Genius Mouse as /class/input/input2
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ts: Compaq touchscreen protocol output
>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.1: irq 193, io mem 0xef004000
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:02.2 to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:02.2: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.2
>ehci_hcd 0000:00:02.2: irq 177, io mem 0xef005000
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>8139cp 0000:01:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:01:0b.0: Try the "8139too" driver instead.
>ACPI: Unable to derive IRQ for device 0000:02:00.1
>ACPI: PCI Interrupt 0000:02:00.1[B]: no GSI - using IRQ 9
>8139too Fast Ethernet driver 0.9.27
>ohci1394: fw-host0: Get PHY Reg timeout [0x00008400/0x00000000/100]
>ohci1394: fw-host0: Set PHY Reg timeout [0x000044c0/0x00004000/100]
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9]  MMIO=[ee000000-ee0007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>ohci1394: fw-host0: Get PHY Reg timeout [0x00008200/0x00000000/100]
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 201
> arc%d: SOHARD
>com20020: probe of 0000:01:07.0 failed with error -16
>ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 201
>eth0: RealTek RTL8139 at 0xc0d4a000, 00:0d:61:43:75:d2, IRQ 201
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>Adding 514008k swap on /dev/hda5.  Priority:-1 extents:1 across:514008k
>ohci1394: fw-host0: Get PHY Reg timeout [0x00008500/0x00000000/100]
>ohci1394: fw-host0: Set PHY Reg timeout [0x00004540/0x00004000/100]
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>ReiserFS: hda7: found reiserfs format "3.6" with standard journal
>ReiserFS: hda7: using ordered data mode
>ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda7: checking transaction log (hda7)
>ReiserFS: hda7: Using r5 hash to sort names
>ReiserFS: hda8: found reiserfs format "3.6" with standard journal
>ReiserFS: hda8: using ordered data mode
>ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda8: checking transaction log (hda8)
>ReiserFS: hda8: Using r5 hash to sort names
>Zapata Telephony Interface Registered on major 196
>Zaptel Version:  Echo Canceller: MG2
>ztdummy: RTC rate is 1024
>Registered tone zone 0 (United States / North America)
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 209
>NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9631  Thu Nov  9 17:38:10 PST 2006
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
>QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
>KQEMU installed, max_locked_mem=128228kB.
>NET: Registered protocol family 4
>NET: Registered protocol family 5
>ohci_hcd 0000:00:02.0: wakeup
>usb 1-1: new full speed USB device using ohci_hcd and address 2
>usb 1-1: configuration #1 chosen from 1 choice
>cdc_acm 1-1:1.1: ttyACM0: USB ACM device
>cdc_acm 1-1:1.3: ttyACM1: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
>usbcore: registered new driver libusual
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>  Vendor: Sony Eri  Model: Memory Stick      Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sda: 991232 512-byte hdwr sectors (508 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 6a 00 00
>sda: assuming drive cache: write through
>SCSI device sda: 991232 512-byte hdwr sectors (508 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 6a 00 00
>sda: assuming drive cache: write through
> sda: sda1
>sd 0:0:0:0: Attached scsi removable disk sda
>usb-storage: device scan complete
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>usb 1-1: USB disconnect, address 2
>usb 3-1: new high speed USB device using ehci_hcd and address 3
>usb 3-1: configuration #1 chosen from 1 choice
>scsi1 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>  Vendor:           Model: USB FLASH DRIVE   Rev: 34CH
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sda: 2015232 512-byte hdwr sectors (1032 MB)
>sda: Write Protect is off
>sda: Mode Sense: 23 00 00 00
>sda: assuming drive cache: write through
>SCSI device sda: 2015232 512-byte hdwr sectors (1032 MB)
>sda: Write Protect is off
>sda: Mode Sense: 23 00 00 00
>sda: assuming drive cache: write through
> sda: sda1
>sd 1:0:0:0: Attached scsi removable disk sda
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>usb-storage: device scan complete
>floppy0: data CRC error: track 0, head 0, sector 8, size 2
>floppy0: data CRC error: track 0, head 0, sector 8, size 2
>end_request: I/O error, dev fd0, sector 7
>floppy0: data CRC error: track 2, head 0, sector 15, size 2
>floppy0: data CRC error: track 2, head 0, sector 15, size 2
>end_request: I/O error, dev fd0, sector 86
>Buffer I/O error on device fd0, logical block 10
>floppy0: data CRC error: track 3, head 0, sector 6, size 2
>floppy0: data CRC error: track 3, head 0, sector 6, size 2
>end_request: I/O error, dev fd0, sector 113
>Buffer I/O error on device fd0, logical block 14
>floppy0: data CRC error: track 0, head 0, sector 8, size 2
>floppy0: data CRC error: track 0, head 0, sector 8, size 2
>end_request: I/O error, dev fd0, sector 7
>Buffer I/O error on device fd0, logical block 0
>floppy0: data CRC error: track 0, head 0, sector 15, size 2
>floppy0: data CRC error: track 0, head 0, sector 15, size 2
>end_request: I/O error, dev fd0, sector 14
>Buffer I/O error on device fd0, logical block 1
>floppy0: data CRC error: track 1, head 0, sector 6, size 2
>floppy0: data CRC error: track 1, head 0, sector 6, size 2
>end_request: I/O error, dev fd0, sector 41
>Buffer I/O error on device fd0, logical block 5
>floppy0: data CRC error: track 0, head 0, sector 8, size 2
>floppy0: data CRC error: track 0, head 0, sector 8, size 2
>end_request: I/O error, dev fd0, sector 7
>Buffer I/O error on device fd0, logical block 0
>floppy0: sector not found: track 0, head 1, sector 1, size 2
>floppy0: sector not found: track 0, head 1, sector 1, size 2
>end_request: I/O error, dev fd0, sector 18
>Buffer I/O error on device fd0, logical block 2
>floppy0: sector not found: track 0, head 1, sector 7, size 2
>floppy0: sector not found: track 0, head 1, sector 7, size 2
>end_request: I/O error, dev fd0, sector 24
>Buffer I/O error on device fd0, logical block 3
>floppy0: sector not found: track 0, head 1, sector 15, size 2
>floppy0: sector not found: track 0, head 1, sector 15, size 2
>end_request: I/O error, dev fd0, sector 32
>Buffer I/O error on device fd0, logical block 4
>floppy0: sector not found: track 0, head 1, sector 1, size 2
>floppy0: sector not found: track 0, head 1, sector 1, size 2
>end_request: I/O error, dev fd0, sector 18
>Buffer I/O error on device fd0, logical block 2
>floppy0: sector not found: track 0, head 1, sector 1, size 2
>floppy0: sector not found: track 0, head 1, sector 1, size 2
>end_request: I/O error, dev fd0, sector 18
>Buffer I/O error on device fd0, logical block 2
>floppy0: sector not found: track 0, head 1, sector 7, size 2
>floppy0: sector not found: track 0, head 1, sector 7, size 2
>end_request: I/O error, dev fd0, sector 24
>Buffer I/O error on device fd0, logical block 3
>floppy0: sector not found: track 0, head 1, sector 15, size 2
>floppy0: sector not found: track 0, head 1, sector 15, size 2
>end_request: I/O error, dev fd0, sector 32
>Buffer I/O error on device fd0, logical block 4
>floppy0: sector not found: track 0, head 1, sector 1, size 2
>floppy0: sector not found: track 0, head 1, sector 1, size 2
>end_request: I/O error, dev fd0, sector 18
>Buffer I/O error on device fd0, logical block 2
>floppy0: data CRC error: track 2, head 0, sector 10, size 2
>floppy0: data CRC error: track 2, head 0, sector 10, size 2
>end_request: I/O error, dev fd0, sector 81
>Buffer I/O error on device fd0, logical block 10
>floppy0: data CRC error: track 3, head 0, sector 1, size 2
>floppy0: data CRC error: track 3, head 0, sector 1, size 2
>end_request: I/O error, dev fd0, sector 108
>Buffer I/O error on device fd0, logical block 13
>floppy0: data CRC error: track 0, head 0, sector 10, size 2
>floppy0: data CRC error: track 0, head 0, sector 10, size 2
>end_request: I/O error, dev fd0, sector 9
>Buffer I/O error on device fd0, logical block 1
>floppy0: data CRC error: track 1, head 0, sector 1, size 2
>floppy0: data CRC error: track 1, head 0, sector 1, size 2
>end_request: I/O error, dev fd0, sector 36
>Buffer I/O error on device fd0, logical block 4
>floppy0: data CRC error: track 0, head 0, sector 10, size 2
>floppy0: data CRC error: track 0, head 0, sector 10, size 2
>end_request: I/O error, dev fd0, sector 9
>Buffer I/O error on device fd0, logical block 1
>usb 3-1: USB disconnect, address 3
>sda : READ CAPACITY failed.
>sda : status=0, message=00, host=1, driver=00 
>sda : sense not available. 
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: assuming drive cache: write through

Actions: View

Attachments on bug 11881: 1993