Attachment 1618 Details for Bug 3854 – dmesg от пропатченного 2.6.16

dmesg от пропатченного 2.6.16

dmesg-2.6.16-wks26-up-alt3.patched (text/plain), 9.76 KB, created by Yury Aliaev on 2006-09-11 11:53:08 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Yury Aliaev

Created: 2006-09-11 11:53:08 MSD

Size: 9.76 KB

patch

obsolete

>Linux version 2.6.16-wks26-up-alt3 (mutabor@Digitalina) (gcc version 3.4.5 20051201 (ALT Linux, build 3.4.5-alt4)) #2 PREEMPT Sat Sep 9 21:42:23 MSD 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>128MB LOWMEM available.
>On node 0 totalpages: 32768
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 28672 pages, LIFO batch:7
>  HighMem zone: 0 pages, LIFO batch:0
>DMI 2.2 present.
>ACPI: Unable to locate RSDP
>Allocating PCI resources starting at 10000000 (gap: 08000000:f7ff0000)
>Built 1 zonelists
>Kernel command line: BOOT_IMAGE=2616-wks26-up-3 ro root=309
>No local APIC present or hardware disabled
>mapped APIC to ffffd000 (01101000)
>Initializing CPU#0
>PID hash table entries: 1024 (order: 10, 16384 bytes)
>Detected 523.910 MHz processor.
>Using tsc for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 126248k/131072k available (1470k kernel code, 4288k reserved, 594k data, 172k init, 0k highmem, 0k BadRAM)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1049.40 BogoMIPS (lpj=524701)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
>CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002 00000000 00000000 00000000
>CPU: AMD-K6(tm) 3D processor stepping 0c
>Checking 'hlt' instruction... OK.
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 487k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfb220, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>PnPBIOS: Scanning system for PnP BIOS support...
>PnPBIOS: Found PnP BIOS installation structure at 0xc00fbeb0
>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbed8, dseg 0xf0000
>PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>PCI: Using ALI M1533 IRQ Router
>PCI: Using IRQ router ALI M1533 [10b9/1533] at 0000:00:07.0
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:0a: ioport range 0x40b-0x40b has been reserved
>pnp: 00:0a: ioport range 0x4d6-0x4d6 has been reserved
>pnp: 00:0a: ioport range 0x5000-0x501f has been reserved
>pnp: 00:0a: ioport range 0x4000-0x403f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: d8000000-d9ffffff
>  PREFETCH window: d4000000-d7ffffff
>audit: initializing netlink socket (disabled)
>audit(1157892890.545:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Activating ISA DMA hang workarounds.
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
>00:0c: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
>00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>TCP bic registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>Suspend2 Core.
>Suspend2 Compression Driver loading.
>Suspend2 Encryption Driver loading.
>Suspend2 Swap Writer loading.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>RAMDISK: Compressed image found at block 0
>VFS: Mounted root (romfs filesystem) readonly.
>input: AT Translated Set 2 keyboard as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ALI15X3: IDE controller at PCI slot 0000:00:0f.0
>ALI15X3: chipset revision 194
>ALI15X3: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: WDC WD400PB-00EPA0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: DV-516D, ATAPI CD/DVD-ROM drive
>hdd: CD-W540E, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 78165360 sectors (40020 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(66)
>hda: cache flushes supported
> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
>SCSI subsystem initialized
>PCI: Found IRQ 10 for device 0000:00:0b.0
>sym0: <810> rev 0x2 at pci 0000:00:0b.0 irq 10
>sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
>sym0: SCSI BUS has been reset.
>scsi0 : sym-2.2.2
>  Vendor: QUANTUM   Model: VP32210           Rev: 81H8
>  Type:   Direct-Access                      ANSI SCSI revision: 02
> target0:0:1: tagged command queuing enabled, command queue depth 16.
> target0:0:1: Beginning Domain Validation
> target0:0:1: asynchronous
> target0:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8)
> target0:0:1: Domain Validation skipping write tests
> target0:0:1: Ending Domain Validation
>SCSI device sda: 4308352 512-byte hdwr sectors (2206 MB)
>sda: Write Protect is off
>sda: Mode Sense: c8 00 10 08
>SCSI device sda: drive cache: write back w/ FUA
>SCSI device sda: 4308352 512-byte hdwr sectors (2206 MB)
>sda: Write Protect is off
>sda: Mode Sense: c8 00 10 08
>SCSI device sda: drive cache: write back w/ FUA
> sda: sda1 sda2 < sda5 > sda3 sda4
>sd 0:0:1:0: Attached scsi disk sda
>SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>Suspend2 2.2.4: You need to use a resume2= command line parameter to tell Suspend2 where to look for an image.
>Suspend2 2.2.4: Resume2 parameter is empty. Suspending will be disabled.
>Suspend2 2.2.4: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending.
>XFS mounting filesystem hda9
>Ending clean XFS mount for filesystem: hda9
>VFS: Mounted root (xfs filesystem) readonly.
>Trying to move old root to /initrd ... /initrd does not exist. Ignored.
>Unmounting old root
>Trying to free ramdisk memory ... okay
>Freeing unused kernel memory: 172k freed
>Executing init=/sbin/init
>Adding 184736k swap on /dev/sda4.  Priority:-1 extents:1 across:184736k
>Adding 1333352k swap on /dev/sda5.  Priority:-2 extents:1 across:1333352k
>Real Time Clock Driver v1.12ac
>hdc: ATAPI 16X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ide-cd: ignoring drive hdd
>Linux agpgart interface v0.101 (c) Dave Jones
>ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
>scsi1 : SCSI host adapter emulation for IDE ATAPI devices
>  Vendor: TEAC      Model: CD-W540E          Rev: 1.0C
>  Type:   CD-ROM                             ANSI SCSI revision: 00
>sr0: scsi-1 drive
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:1:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>aty128fb: Found Intel x86 BIOS ROM Image
>aty128fb: Rage128 BIOS located
>aty128fb: Rage128 PF PRO AGP [chip rev 0x1] 16M 128-bit SDR SGRAM (1:1)
>Console: switching to colour frame buffer device 80x30
>fb0: ATY Rage128 frame buffer device on Rage128 PF PRO AGP
>aty128fb: Rage128 MTRR set to ON
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>Supermount version 2.0.4 for kernel 2.6
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>cs4281: version v1.13.32 time 10:58:53 Sep 10 2006
>PCI: Found IRQ 11 for device 0000:00:0a.0
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>PCI: Found IRQ 5 for device 0000:00:02.0
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 5, io mem 0xda011000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: PC Speaker as /class/input/input1
>Floppy drive(s): fd0 is 1.44M, fd1 is 360K PC
>FDC 0 is a post-1991 82077
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>input: GenPS/2 Genius Mouse as /class/input/input2
>ts: Compaq touchscreen protocol output
>agpgart: Detected ALi M1541 chipset
>agpgart: AGP aperture is 64M @ 0xd0000000
>usb 1-2: new full speed USB device using ohci_hcd and address 2
>ohci_hcd 0000:00:02.0: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.

Actions: View

Attachments on bug 3854: 361 | 367 | 368 | 369 | 370 | 374 | 375 | 378 | 379 | 383 | 384 | 385 | 397 | 408 | 409 | 417 | 418 | 419 | 420 | 1469 | 1618 | 1633