Attachment 2510 Details for Bug 15006 – вывод dmesg

вывод dmesg

dmesg.txt (text/plain), 19.13 KB, created by Slava Dubrovskiy on 2008-03-19 19:48:01 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Slava Dubrovskiy

Created: 2008-03-19 19:48:01 MSK

Size: 19.13 KB

patch

obsolete

>Bootdata ok (command line is BOOT_IMAGE=alt0/vmlinuz initrd=alt0/full.cz changedisk splash=silent vga=0x314 lang=ru_RU automatic=method:cdrom)
>Linux version 2.6.18-std-smp-alt12 (builder@apiary.armor.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt12)) #1 SMP Mon Feb 11 00:44:57 MSK 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000097800 (usable)
> BIOS-e820: 0000000000097800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
> BIOS-e820: 00000000cff70000 - 00000000cff78000 (ACPI data)
> BIOS-e820: 00000000cff78000 - 00000000cff80000 (ACPI NVS)
> BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f68a0
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x00000000cff73121
>ACPI: FADT (v001 INTEL  LINDHRST 0x06040000 PTL  0x00000003) @ 0x00000000cff77e38
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x00000000cff77eac
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x00000000cff77f48
>ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @ 0x00000000cff77f70
>ACPI: MCFG (v001 PTLTD  	 MCFG   0x06040000  LTP 0x00000000) @ 0x00000000cff77fc0
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030224) @ 0x00000000cff7315d
>ACPI: DSDT (v001  Intel LINDHRST 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000130000000
>Bootmem setup node 0 0000000000000000-0000000130000000
>On node 0 totalpages: 1030314
>  DMA zone: 2946 pages, LIFO batch:0
>  DMA32 zone: 833448 pages, LIFO batch:31
>  Normal zone: 193920 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x06] enabled)
>Processor #6 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
>Processor #7 15:4 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
>ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
>IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 0000000000097000 - 0000000000098000
>Nosave address range: 0000000000098000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e4000
>Nosave address range: 00000000000e4000 - 0000000000100000
>Nosave address range: 00000000cff70000 - 00000000cff78000
>Nosave address range: 00000000cff78000 - 00000000cff80000
>Nosave address range: 00000000cff80000 - 00000000d0000000
>Nosave address range: 00000000d0000000 - 00000000e0000000
>Nosave address range: 00000000e0000000 - 00000000f0000000
>Nosave address range: 00000000f0000000 - 00000000fec00000
>Nosave address range: 00000000fec00000 - 00000000fec10000
>Nosave address range: 00000000fec10000 - 00000000fee00000
>Nosave address range: 00000000fee00000 - 00000000fee01000
>Nosave address range: 00000000fee01000 - 00000000ff800000
>Nosave address range: 00000000ff800000 - 00000000ffc00000
>Nosave address range: 00000000ffc00000 - 0000000100000000
>Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>Built 1 zonelists.  Total pages: 1030314
>Kernel command line: BOOT_IMAGE=alt0/vmlinuz initrd=alt0/full.cz changedisk splash=silent vga=0x314 lang=ru_RU automatic=method:cdrom
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 3200.202 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Checking aperture...
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x58cc000 - 0x98cc000
>Memory: 4044840k/4980736k available (1860k kernel code, 148468k reserved, 1212k data, 196k init)
>Calibrating delay using timer specific routine.. 6404.96 BogoMIPS (lpj=12809920)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>using mwait in idle threads.
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>checking if image is initramfs... it is
>Freeing initrd memory: 4003k freed
>ACPI: Core revision 20060707
>ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist.
>Using local APIC timer interrupts.
>result 12500711
>Detected 12.500 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/4 APIC 0x0
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6400.80 BogoMIPS (lpj=12801612)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU1: Thermal monitoring enabled (TM1)
>                  Intel(R) Xeon(TM) CPU 3.20GHz stepping 0a
>SMP alternatives: switching to SMP code
>Booting processor 2/4 APIC 0x1
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 6400.70 BogoMIPS (lpj=12801418)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU2: Thermal monitoring enabled (TM1)
>                  Intel(R) Xeon(TM) CPU 3.20GHz stepping 0a
>SMP alternatives: switching to SMP code
>Booting processor 3/4 APIC 0x7
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 6400.90 BogoMIPS (lpj=12801816)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>CPU3: Thermal monitoring enabled (TM1)
>                  Intel(R) Xeon(TM) CPU 3.20GHz stepping 03
>Brought up 4 CPUs
>testing NMI watchdog ... OK.
>migration_cost=15,1624
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>PCI: No mmconfig possible on device 6:1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>Boot video device is 0000:06:01.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
>ACPI: Device [PRT] status [0000000c]: functional but not present; setting present
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>PCI: Bridge: 0000:01:00.0
>  IO window: 2000-2fff
>  MEM window: dd200000-dd2fffff
>  PREFETCH window: df200000-df2fffff
>PCI: Bridge: 0000:01:00.2
>  IO window: 3000-3fff
>  MEM window: dd300000-dd3fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: 2000-3fff
>  MEM window: dd100000-dd3fffff
>  PREFETCH window: df200000-df2fffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-4fff
>  MEM window: dd400000-deffffff
>  PREFETCH window: d1000000-d10fffff
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>PCI: Setting latency timer of device 0000:01:00.2 to 64
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x39 set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1205737527.196:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie01]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie01]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>Allocate Port Service[0000:00:06.0:pcie00]
>Allocate Port Service[0000:00:06.0:pcie01]
>vesafb: framebuffer at 0xde000000, mapped to 0xffffc20010100000, using 3750k, total 8128k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 146854 bytes,<6>...found (800x600, 27802 bytes, v3).
>Console: switching to colour frame buffer device 97x34
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>NET: Registered protocol family 1
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 196k freed
>Executing init=/init
>input: AT Translated Set 2 keyboard as /class/input/input0
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 177, io mem 0xdd001000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 185, io base 0x00001420
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 193, io base 0x00001440
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001460
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>irq 169: nobody cared (try booting with the "irqpoll" option)
>
>Call Trace:
> [<ffffffff802662bb>] dump_stack+0x12/0x17
> [<ffffffff802a9ab2>] __report_bad_irq+0x30/0x7d
> [<ffffffff802a9ce2>] note_interrupt+0x1e3/0x224
> [<ffffffff802a9206>] __do_IRQ+0xc7/0x105
> [<ffffffff802672c0>] do_IRQ+0xe7/0xf5
> [<ffffffff80259891>] ret_from_intr+0x0/0xa
>DWARF2 unwinder stuck at ret_from_intr+0x0/0xa
>Leftover inexact backtrace:
> <IRQ> <EOI> [<ffffffff88007417>] :usbcore:hcd_submit_urb+0x0/0x74f
> [<ffffffff80253f45>] mwait_idle+0x36/0x4a
> [<ffffffff80246276>] cpu_idle+0x95/0xb8
> [<ffffffff805997a6>] start_kernel+0x220/0x225
> [<ffffffff80599288>] _sinittext+0x288/0x28c
>
>handlers:
>[<ffffffff8800701c>] (usb_hcd_irq+0x0/0x55 [usbcore])
>[<ffffffff8800701c>] (usb_hcd_irq+0x0/0x55 [usbcore])
>Disabling IRQ #169
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-2: new low speed USB device using uhci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>usbcore: registered new driver hiddev
>input: A4Tech USB Optical Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.0-2
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0x14a8-0x14af, BIOS settings: hdc:pio, hdd:DMA
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>hdd: MATSHITADVD-ROM SR-8178, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hdd: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>usbcore: registered new driver libusual
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>  Vendor: Generic   Model: Flash Disk        Rev: 7.77
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>usb-storage: device scan complete
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>loop: loaded (max 8 devices)
>squashfs: version 3.3 (2007/10/31) Phillip Lougher
>Registering unionfs 1.4
>unionfs: debugging is not enabled
>input: PC Speaker as /class/input/input2
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>ts: Compaq touchscreen protocol output
>GSI 20 sharing vector 0xC9 and IRQ 20
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 201
>Intel(R) PRO/1000 Network Driver - version 7.2.7-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>GSI 21 sharing vector 0xD1 and IRQ 21
>ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 54 (level, low) -> IRQ 209
>SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
>e1000: 0000:03:02.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2f:0b:e0
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>GSI 22 sharing vector 0xD9 and IRQ 22
>ACPI: PCI Interrupt 0000:03:02.1[B] -> GSI 55 (level, low) -> IRQ 217
>e1000: 0000:03:02.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2f:0b:e1
>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 00
>sda: assuming drive cache: write through
>SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 00
>sda: assuming drive cache: write through
> sda: sda1
>sd 0:0:0:0: Attached scsi removable disk sda
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>mtrr: type mismatch for de7e0000,10000 old: uncachable new: write-combining
>mtrr: type mismatch for de7c0000,20000 old: uncachable new: write-combining
>mtrr: type mismatch for de780000,40000 old: uncachable new: write-combining
>mtrr: type mismatch for de700000,80000 old: uncachable new: write-combining
>mtrr: type mismatch for de600000,100000 old: uncachable new: write-combining
>mtrr: type mismatch for de400000,200000 old: uncachable new: write-combining
>mtrr: type mismatch for de000000,400000 old: uncachable new: write-combining
>aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.2 loaded

Actions: View

Attachments on bug 15006: 2510 | 2511