Attachment 3091 Details for Bug 17971 – без acpi=off не грузится

без acpi=off не грузится

dmesg-2.6.27-std-def-alt2-acpi-off (text/plain), 21.63 KB, created by Sergey Y. Afonin on 2008-11-25 19:18:36 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Sergey Y. Afonin

Created: 2008-11-25 19:18:36 MSK

Size: 21.63 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-std-def-alt2 (builder@apiary.egro.altlinux.org) (gcc version 4.3.2 20081105 (ALT Linux 4.3.2-alt5) (GCC) ) #1 SMP Mon Nov 10 17:46:03 UTC 2008
>Command line: auto BOOT_IMAGE=2627-std-def-2 ro root=805 panic=30 nolapic noapic acpi=off
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fcf0000 (usable)
> BIOS-e820: 000000003fcf0000 - 000000003fd96000 (ACPI NVS)
> BIOS-e820: 000000003fd96000 - 000000003fdfd000 (usable)
> BIOS-e820: 000000003fdfd000 - 000000003fe5f000 (reserved)
> BIOS-e820: 000000003fe5f000 - 000000003fe6a000 (usable)
> BIOS-e820: 000000003fe6a000 - 000000003fedf000 (ACPI NVS)
> BIOS-e820: 000000003fedf000 - 000000003fee7000 (usable)
> BIOS-e820: 000000003fee7000 - 000000003feff000 (ACPI data)
> BIOS-e820: 000000003feff000 - 000000003ff00000 (usable)
> BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fff80000 - 00000000fff8c000 (reserved)
>last_pfn = 0x3ff00 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
> 0000000000 - 003fe00000 page 2M
> 003fe00000 - 003ff00000 page 4k
>kernel direct mapping tables up to 3ff00000 @ 8000-b000
>last_map_addr: 3ff00000 end: 3ff00000
>RAMDISK: 00e81000 - 00effc55
>DMI 2.5 present.
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003ff00000
>Bootmem setup node 0 0000000000000000-000000003ff00000
>  NODE_DATA [0000000000001000 - 0000000000005fff]
>  bootmap [0000000000009000 -  0000000000010fdf] pages 8
>(6 early reservations) ==> bootmem [0000000000 - 003ff00000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000815cec]    TEXT DATA BSS ==> [0000200000 - 0000815cec]
>  #3 [0000e81000 - 0000effc55]          RAMDISK ==> [0000e81000 - 0000effc55]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
>found SMP MP-table at [ffff8800000fd1e0] 000fd1e0
> [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[6] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0003fcf0
>    0: 0x0003fd96 -> 0x0003fdfd
>    0: 0x0003fe5f -> 0x0003fe6a
>    0: 0x0003fedf -> 0x0003fee7
>    0: 0x0003feff -> 0x0003ff00
>On node 0 totalpages: 261386
>  DMA zone: 2158 pages, LIFO batch:0
>  DMA32 zone: 253862 pages, LIFO batch:31
>Intel MultiProcessor Specification v1.4
>MPTABLE: OEM ID: INTEL   
>MPTABLE: Product ID: S3200SHC    
>MPTABLE: APIC at: 0xFEE00000
>Processor #0 (Bootup-CPU)
>I/O APIC #5 Version 32 at 0xFEC00000.
>Setting APIC routing to flat
>Processors: 1
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>PM: Registered nosave memory: 000000003fcf0000 - 000000003fd96000
>PM: Registered nosave memory: 000000003fdfd000 - 000000003fe5f000
>PM: Registered nosave memory: 000000003fe6a000 - 000000003fedf000
>PM: Registered nosave memory: 000000003fee7000 - 000000003feff000
>Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
>PERCPU: Allocating 52256 bytes of per cpu data
>NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 256020
>Policy zone: DMA32
>Kernel command line: auto BOOT_IMAGE=2627-std-def-2 ro root=805 panic=30 nolapic noapic acpi=off
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC: Using PIT calibration value
>Detected 1994.977 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 1024212k/1047552k available (2962k kernel code, 21332k reserved, 1590k data, 488k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.95 BogoMIPS (lpj=7979908)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 23k freed
>BIOS bug, local APIC #0 not detected!...
>... forcing use of dummy APIC emulation.(tell your hw vendor)
>SMP disabled
>Brought up 1 CPUs
>Total of 1 processors activated (3989.95 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0 level CPU
>  groups: 0
>net_namespace: 1552 bytes
>NET: Registered protocol family 16
>PCI: Using configuration type 1 for base access
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI: 0000:00:19.0 reg 10 32bit mmio: [41a00000, 41a1ffff]
>PCI: 0000:00:19.0 reg 14 32bit mmio: [41a20000, 41a20fff]
>PCI: 0000:00:19.0 reg 18 io port: [20e0, 20ff]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>PCI: 0000:00:1a.0 reg 20 io port: [20c0, 20df]
>PCI: 0000:00:1a.1 reg 20 io port: [20a0, 20bf]
>PCI: 0000:00:1a.2 reg 20 io port: [2080, 209f]
>PCI: 0000:00:1a.7 reg 10 32bit mmio: [41a21400, 41a217ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>PCI: 0000:00:1d.0 reg 20 io port: [2060, 207f]
>PCI: 0000:00:1d.1 reg 20 io port: [2040, 205f]
>PCI: 0000:00:1d.2 reg 20 io port: [2020, 203f]
>PCI: 0000:00:1d.7 reg 10 32bit mmio: [41a21000, 41a213ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: 0000:00:1f.2 reg 10 io port: [2458, 245f]
>PCI: 0000:00:1f.2 reg 14 io port: [246c, 246f]
>PCI: 0000:00:1f.2 reg 18 io port: [2450, 2457]
>PCI: 0000:00:1f.2 reg 1c io port: [2468, 246b]
>PCI: 0000:00:1f.2 reg 20 io port: [2430, 243f]
>PCI: 0000:00:1f.2 reg 24 io port: [2420, 242f]
>PCI: 0000:00:1f.3 reg 10 64bit mmio: [41a21800, 41a218ff]
>PCI: 0000:00:1f.3 reg 20 io port: [2000, 201f]
>PCI: 0000:00:1f.5 reg 10 io port: [2448, 244f]
>PCI: 0000:00:1f.5 reg 14 io port: [2464, 2467]
>PCI: 0000:00:1f.5 reg 18 io port: [2440, 2447]
>PCI: 0000:00:1f.5 reg 1c io port: [2460, 2463]
>PCI: 0000:00:1f.5 reg 20 io port: [2410, 241f]
>PCI: 0000:00:1f.5 reg 24 io port: [2400, 240f]
>PCI: 0000:02:00.0 reg 10 32bit mmio: [40000000, 40ffffff]
>PCI: 0000:02:00.0 reg 14 32bit mmio: [41800000, 41803fff]
>PCI: 0000:02:00.0 reg 18 32bit mmio: [41000000, 417fffff]
>PCI: 0000:02:00.0 reg 30 32bit mmio: [ffff0000, ffffffff]
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.4. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:1c.4 32bit mmio: [41000000, 418fffff]
>PCI: bridge 0000:00:1c.4 64bit mmio pref: [40000000, 40ffffff]
>PCI: 0000:03:00.0 reg 10 32bit mmio: [41981000, 41981fff]
>PCI: 0000:03:00.0 reg 14 io port: [1080, 10bf]
>PCI: 0000:03:00.0 reg 18 32bit mmio: [41960000, 4197ffff]
>PCI: 0000:03:00.0 reg 30 32bit mmio: [0, ffff]
>pci 0000:03:00.0: supports D1
>pci 0000:03:00.0: supports D2
>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>PCI: 0000:03:01.0 reg 10 32bit mmio: [41980000, 41980fff]
>PCI: 0000:03:01.0 reg 14 io port: [1040, 107f]
>PCI: 0000:03:01.0 reg 18 32bit mmio: [41940000, 4195ffff]
>PCI: 0000:03:01.0 reg 30 32bit mmio: [ffff0000, ffffffff]
>pci 0000:03:01.0: supports D1
>pci 0000:03:01.0: supports D2
>pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.0: PME# disabled
>PCI: 0000:03:02.0 reg 10 32bit mmio: [41920000, 4193ffff]
>PCI: 0000:03:02.0 reg 14 32bit mmio: [41900000, 4191ffff]
>PCI: 0000:03:02.0 reg 18 io port: [1000, 103f]
>PCI: 0000:03:02.0 reg 30 32bit mmio: [fffe0000, ffffffff]
>pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:02.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>PCI: bridge 0000:00:1e.0 io port: [1000, 1fff]
>PCI: bridge 0000:00:1e.0 32bit mmio: [41900000, 419fffff]
>PCI: Discovered primary peer bus ff [IRQ]
>pci 0000:00:1f.0: PIIX/ICH IRQ router [8086/2916]
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:parse DMAR table failure.
>PCI-GART: No AMD northbridge found.
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread FFFF88003F9C4040 could not acquire Mutex [1] [20080609]
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: disabled
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.4:   IO window: disabled
>pci 0000:00:1c.4:   MEM window: 0x41000000-0x418fffff
>pci 0000:00:1c.4:   PREFETCH window: 0x00000040000000-0x00000040ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: 0x1000-0x1fff
>pci 0000:00:1e.0:   MEM window: 0x41900000-0x419fffff
>pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x000000500fffff
>PCI: setting IRQ 11 as level-triggered
>pci 0000:00:1c.0: found PCI INT A -> IRQ 11
>pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1c.4
>pci 0000:00:1c.0: sharing IRQ 11 with 0000:02:00.0
>pci 0000:00:1c.0: sharing IRQ 11 with 0000:03:00.0
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.4: found PCI INT A -> IRQ 11
>pci 0000:00:1c.4: sharing IRQ 11 with 0000:00:1c.0
>pci 0000:00:1c.4: sharing IRQ 11 with 0000:02:00.0
>pci 0000:00:1c.4: sharing IRQ 11 with 0000:03:00.0
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 mmio: [0, 0]
>bus: 01 index 1 mmio: [0, 0]
>bus: 01 index 2 mmio: [0, 0]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 mmio: [0, 0]
>bus: 02 index 1 mmio: [41000000, 418fffff]
>bus: 02 index 2 mmio: [40000000, 40ffffff]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 io port: [1000, 1fff]
>bus: 03 index 1 mmio: [41900000, 419fffff]
>bus: 03 index 2 mmio: [50000000, 500fffff]
>bus: 03 index 3 io port: [0, ffff]
>bus: 03 index 4 mmio: [0, ffffffffffffffff]
>bus: ff index 0 io port: [0, ffff]
>bus: ff index 1 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 507k freed
>platform rtc_cmos: registered platform RTC device (no PNP device found)
>audit: initializing netlink socket (disabled)
>type=2000 audit(1227646982.131:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 2001
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:02:00.0: Boot video device
>pci 0000:03:00.0: Firmware left e100 interrupts enabled; disabling
>pci 0000:03:01.0: Firmware left e100 interrupts enabled; disabling
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pcieport-driver 0000:00:1c.4: setting latency timer to 64
>pcieport-driver 0000:00:1c.4: found MSI capability
>pci_express 0000:00:1c.4:pcie00: allocate port service
>pci_express 0000:00:1c.4:pcie02: allocate port service
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Switched to high resolution mode on CPU 0
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Driver for HIFN 795x crypto accelerator chip has been successfully registered.
>TCP bic registered
>registered taskstats version 1
>Freeing unused kernel memory: 488k freed
>Executing init=/init
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>PCI: setting IRQ 10 as level-triggered
>ata_piix 0000:00:1f.2: found PCI INT A -> IRQ 10
>ata_piix 0000:00:1f.2: sharing IRQ 10 with 0000:00:1a.1
>ata_piix 0000:00:1f.2: sharing IRQ 10 with 0000:00:1f.5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2430 irq 14
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2438 irq 15
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133
>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 300)
>isa bounce pool size: 16 pages
>scsi 0:0:0:0: Direct-Access     ATA      ST380815AS       4.AA PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata_piix 0000:00:1f.5: found PCI INT A -> IRQ 10
>ata_piix 0000:00:1f.5: sharing IRQ 10 with 0000:00:1a.1
>ata_piix 0000:00:1f.5: sharing IRQ 10 with 0000:00:1f.2
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>ata_piix 0000:00:1f.5: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x2448 ctl 0x2464 bmdma 0x2410 irq 10
>ata4: SATA max UDMA/133 cmd 0x2440 ctl 0x2460 bmdma 0x2418 irq 10
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>PCI: setting IRQ 9 as level-triggered
>uhci_hcd 0000:00:1a.0: found PCI INT A -> IRQ 9
>uhci_hcd 0000:00:1a.0: sharing IRQ 9 with 0000:00:1d.2
>uhci_hcd 0000:00:1a.0: sharing IRQ 9 with 0000:00:1f.3
>uhci_hcd 0000:00:1a.0: sharing IRQ 9 with 0000:03:02.0
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 9, io base 0x000020c0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>uhci_hcd 0000:00:1a.1: found PCI INT B -> IRQ 10
>uhci_hcd 0000:00:1a.1: sharing IRQ 10 with 0000:00:1f.2
>uhci_hcd 0000:00:1a.1: sharing IRQ 10 with 0000:00:1f.5
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 10, io base 0x000020a0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>uhci_hcd 0000:00:1a.2: found PCI INT C -> IRQ 10
>uhci_hcd 0000:00:1a.2: sharing IRQ 10 with 0000:00:1a.7
>uhci_hcd 0000:00:1a.2: sharing IRQ 10 with 0000:03:01.0
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 10, io base 0x00002080
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1a.7: found PCI INT C -> IRQ 10
>ehci_hcd 0000:00:1a.7: sharing IRQ 10 with 0000:00:1a.2
>ehci_hcd 0000:00:1a.7: sharing IRQ 10 with 0000:03:01.0
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 10, io mem 0x41a21400
>input: PC Speaker as /class/input/input1
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day, hpet irqs
>uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11
>uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:00:1d.7
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00002060
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 11
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002040
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 9
>uhci_hcd 0000:00:1d.2: sharing IRQ 9 with 0000:00:1a.0
>uhci_hcd 0000:00:1d.2: sharing IRQ 9 with 0000:00:1f.3
>uhci_hcd 0000:00:1d.2: sharing IRQ 9 with 0000:03:02.0
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 9, io base 0x00002020
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1d.7: found PCI INT A -> IRQ 11
>ehci_hcd 0000:00:1d.7: sharing IRQ 11 with 0000:00:1d.0
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0x41a21000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 6 ports detected
>i801_smbus 0000:00:1f.3: found PCI INT B -> IRQ 9
>i801_smbus 0000:00:1f.3: sharing IRQ 9 with 0000:00:1a.0
>i801_smbus 0000:00:1f.3: sharing IRQ 9 with 0000:00:1d.2
>i801_smbus 0000:00:1f.3: sharing IRQ 9 with 0000:03:02.0
>Adding 2048248k swap on /dev/sda7.  Priority:-1 extents:1 across:2048248k
>EXT3 FS on sda5, internal journal
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda10, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

Actions: View

Attachments on bug 17971: 3089 | 3090 | 3091 | 3092