Attachment 4072 Details for Bug 22356 – Xorg log

Xorg log

Xorg.0.log.old (text/plain), 159.30 KB, created by ildar on 2009-11-21 21:49:24 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: ildar

Created: 2009-11-21 21:49:24 MSK

Size: 159.30 KB

patch

obsolete

>
>X.Org X Server 1.6.5
>Release Date: 2009-10-11
>X Protocol Version 11, Revision 0
>Build Operating System: ALT Linux Sisyphus (20081222) i686
>Current Operating System: Linux ildar.innovations.kz 2.6.30-std-def-alt14 #1 SMP Wed Oct 7 06:44:21 UTC 2009 i686
>Build Date: 05 November 2009  01:48:11PM
> 
>	Before reporting problems, check https://bugzilla.altlinux.org/
>	to make sure that you have the latest version.
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 17 11:04:55 2009
>(II) Loader magic: 0x3fac0
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.4
>	X.Org Video Driver: 5.0
>	X.Org XInput driver : 4.0
>	X.Org Server Extension : 2.0
>(II) Loader running on linux
>(--) using VT number 7
>
>(--) PCI:*(0:0:2:0) 8086:2a02:1025:011b Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
>(--) PCI: (0:0:2:1) 8086:2a03:1025:011b Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0100000/1048576
>(==) Using default built-in configuration (21 lines)
>(==) --- Start of built-in configuration ---
>	Section "Device"
>		Identifier	"Builtin Default intel Device 0"
>		Driver	"intel"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default intel Screen 0"
>		Device	"Builtin Default intel Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default vesa Device 0"
>		Driver	"vesa"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default vesa Screen 0"
>		Device	"Builtin Default vesa Device 0"
>	EndSection
>	Section "ServerLayout"
>		Identifier	"Builtin Default Layout"
>		Screen	"Builtin Default intel Screen 0"
>		Screen	"Builtin Default vesa Screen 0"
>	EndSection
>(==) --- End of built-in configuration ---
>(==) ServerLayout "Builtin Default Layout"
>(**) |-->Screen "Builtin Default intel Screen 0" (0)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default intel Device 0"
>(==) No monitor specified for screen "Builtin Default intel Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default vesa Screen 0" (1)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default vesa Device 0"
>(==) No monitor specified for screen "Builtin Default vesa Screen 0".
>	Using a default monitor configuration.
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(==) FontPath set to:
>	catalogue:/etc/X11/fontpath.d
>(==) ModulePath set to "/usr/lib/X11/modules"
>(II) Cannot locate a core pointer device.
>(II) Cannot locate a core keyboard device.
>(II) The server relies on HAL to provide the list of input devices.
>	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) Executed /usr/libexec/X11/drv.d/x11
>(II) LoadModule: "extmod"
>(II) Loading /usr/lib/X11/modules/extensions/libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.6.5, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>(II) Loading /usr/lib/X11/modules/extensions/libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.6.5, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>(II) Loading /usr/lib/X11/modules/extensions/libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.6.5, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(==) AIGLX enabled
>(II) Loading extension GLX
>(II) LoadModule: "dri"
>(II) Loading /usr/lib/X11/modules/extensions/libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.6.5, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "dri2"
>(II) Loading /usr/lib/X11/modules/extensions/libdri2.so
>(II) Module dri2: vendor="X.Org Foundation"
>	compiled for 1.6.5, module version = 1.1.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DRI2
>(II) LoadModule: "intel"
>(II) Loading /usr/lib/X11/modules/drivers/intel_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.6.5, module version = 2.9.1
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 5.0
>(II) LoadModule: "vesa"
>(II) Loading /usr/lib/X11/modules/drivers/vesa_drv.so
>(II) Module vesa: vendor="X.Org Foundation"
>	compiled for 1.6.0, module version = 2.2.0
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 5.0
>(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
>	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
>	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
>(II) VESA: driver for VESA chipsets: vesa
>(II) Primary Device is: PCI 00@00:02:0
>(WW) Falling back to old probe method for vesa
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/lib/X11/modules/libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.6.5, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 5.0
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 6, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 6, (OK)
>drmOpenByBusid: drmOpenMinor returns 6
>drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>(II) intel(0): Creating default Display subsection in Screen section
>	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
>(==) intel(0): Depth 24, (--) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
>(--) intel(0): Chipset: "965GM"
>(--) intel(0): Linear framebuffer at 0xD0000000
>(--) intel(0): IO registers at addr 0xF0000000 size 1048576
>(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
>(II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port
>(II) intel(0): 2 display pipes available.
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) intel(0): Output VGA has no monitor section
>(II) intel(0): Output LVDS has no monitor section
>(II) intel(0): I2C bus "LVDSDDC_C" initialized.
>(II) intel(0): Attempting to determine panel fixed mode.
>(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
>(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
>(II) intel(0): Output TMDS-1 has no monitor section
>(II) intel(0): SDVOB: device VID/DID: 02:3C.06, clock range 25.0MHz - 200.0MHz
>(II) intel(0): SDVOB: 1 input channel
>(II) intel(0): SDVOB: TMDS0 output reported
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
>(II) intel(0): No SDVO device found on SDVOC
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
>(II) intel(0): Output TV has no monitor section
>(II) intel(0): Current clock rate multiplier: 1
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): Using EDID range info for horizontal sync
>(II) intel(0): Using EDID range info for vertical refresh
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1440x900"x0.0   89.00  1440 1488 1520 1600  900 903 909 926 +hsync +vsync (55.6 kHz)
>(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
>(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1400x1050"x0.0  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
>(II) intel(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1280x800"x0.0  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz)
>(II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
>(II) intel(0): Modeline "1152x921"x76.0  113.47  1152 1224 1352 1552  921 922 925 962 -hsync +vsync (73.1 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Output VGA connected
>(II) intel(0): Output LVDS connected
>(II) intel(0): Output TMDS-1 disconnected
>(II) intel(0): Output TV disconnected
>(II) intel(0): Using exact sizes for initial modes
>(II) intel(0): Output VGA using initial mode 1280x800
>(II) intel(0): Output LVDS using initial mode 1280x800
>(II) intel(0): detected 512 kB GTT.
>(II) intel(0): detected 7676 kB stolen memory.
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>(**) intel(0): Display dimensions: (410, 260) mm
>(**) intel(0): DPI set to (79, 78)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/lib/X11/modules/libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.6.5, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.4
>(II) intel(0): Comparing regs from server start up to After PreInit
>(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
>(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
>(WW) intel(0): PP_STATUS after: on, ready, sequencing on
>(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000207 to 0x80000237
>(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
>(WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS OFIELD_INT_STATUS EFIELD_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
>(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000246 to 0x80000246
>(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
>(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
>(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000c0 to 0x000c00c0
>(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
>(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
>(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
>(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
>(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
>(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
>(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
>(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
>(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
>(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
>(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
>(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
>(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
>(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
>(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
>(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
>(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
>(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087
>(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140
>(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
>(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
>(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
>(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
>(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
>(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
>(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
>(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
>(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
>(II) UnloadModule: "vesa"
>(II) Unloading /usr/lib/X11/modules/drivers/vesa_drv.so
>(==) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) intel(0): Kernel reported 488960 total, 1 used
>(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
>(II) intel(0): [DRI2] Setup complete
>(**) intel(0): Framebuffer compression disabled
>(**) intel(0): Tiling enabled
>(**) intel(0): SwapBuffers wait enabled
>(==) intel(0): VideoRam: 262144 KB
>(II) intel(0): Attempting memory allocation with tiled buffers.
>(II) intel(0): Tiled allocation successful.
>(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(II) UXA(0): Driver registered support for the following operations:
>(II)         solid
>(II)         copy
>(II)         composite (RENDER acceleration)
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(II) intel(0): Current clock rate multiplier: 1
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe A
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(II) intel(0): DPMS enabled
>(==) intel(0): Intel XvMC decoder disabled
>(II) intel(0): Set up textured video
>(II) intel(0): Set up overlay video
>(II) intel(0): direct rendering: DRI2 Enabled
>(--) RandR disabled
>(II) Initializing built-in extension Generic Event Extension
>(II) Initializing built-in extension SHAPE
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension BIG-REQUESTS
>(II) Initializing built-in extension SYNC
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-MISC
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
>(II) AIGLX: Loaded and initialized /usr/lib/X11/modules/dri/i965_dri.so
>(II) GLX: Initialized DRI2 GL provider for screen 0
>(II) intel(0): Setting screen physical size to 261 x 163
>(II) config/hal: Adding input device AT Translated Set 2 keyboard
>(II) LoadModule: "evdev"
>(II) Loading /usr/lib/X11/modules/input/evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 1.6.5, module version = 2.2.6
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 4.0
>(**) AT Translated Set 2 keyboard: always reports core events
>(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
>(II) AT Translated Set 2 keyboard: Found keys
>(II) AT Translated Set 2 keyboard: Configuring as keyboard
>(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) config/hal: Adding input device Macintosh mouse button emulation
>(**) Macintosh mouse button emulation: always reports core events
>(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
>(II) Macintosh mouse button emulation: Found 3 mouse buttons
>(II) Macintosh mouse button emulation: Found x and y relative axes
>(II) Macintosh mouse button emulation: Configuring as mouse
>(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
>(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
>(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
>(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
>(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
>(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
>(II) Macintosh mouse button emulation: initialized for relative axes.
>(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
>(II) LoadModule: "synaptics"
>(II) Loading /usr/lib/X11/modules/input/synaptics_drv.so
>(II) Module synaptics: vendor="X.Org Foundation"
>	compiled for 1.6.3, module version = 1.1.3
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 4.0
>(II) Synaptics touchpad driver version 1.1.3
>(**) Option "Device" "/dev/input/event7"
>(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
>(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
>(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
>(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
>(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
>(**) Option "SHMConfig" "on"
>(**) Option "LeftEdge" "1700"
>(**) Option "RightEdge" "5300"
>(**) Option "TopEdge" "1700"
>(**) Option "BottomEdge" "4200"
>(**) Option "FingerLow" "25"
>(**) Option "FingerHigh" "30"
>(**) Option "MaxTapTime" "180"
>(**) Option "MaxTapMove" "220"
>(**) Option "VertScrollDelta" "100"
>(**) Option "VertEdgeScroll" "true"
>(**) Option "HorizEdgeScroll" "true"
>(**) Option "TouchpadOff" "0"
>(**) Option "RTCornerButton" "2"
>(**) Option "RBCornerButton" "3"
>(**) Option "TapButton1" "1"
>(**) Option "TapButton2" "2"
>(**) Option "TapButton3" "3"
>(**) Option "MinSpeed" "0.25"
>(**) Option "MaxSpeed" "0.7"
>(**) Option "AccelFactor" "0.0010"
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(**) SynPS/2 Synaptics TouchPad: always reports core events
>(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
>(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
>(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
>(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
>(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) config/hal: Adding input device USB-compliant keyboard
>(**) USB-compliant keyboard: always reports core events
>(**) USB-compliant keyboard: Device: "/dev/input/event12"
>(II) USB-compliant keyboard: Found 14 mouse buttons
>(II) USB-compliant keyboard: Found x and y relative axes
>(II) USB-compliant keyboard: Found scroll wheel(s)
>(II) USB-compliant keyboard: Found keys
>(II) USB-compliant keyboard: Configuring as mouse
>(II) USB-compliant keyboard: Configuring as keyboard
>(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
>(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(**) Option "AccelerationScheme" "lightweight"
>(**) USB-compliant keyboard: (accel) selected scheme lightweight/2
>(II) USB-compliant keyboard: initialized for relative axes.
>(II) config/hal: Adding input device USB-compliant keyboard
>(**) USB-compliant keyboard: always reports core events
>(**) USB-compliant keyboard: Device: "/dev/input/event11"
>(II) USB-compliant keyboard: Found keys
>(II) USB-compliant keyboard: Configuring as keyboard
>(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) config/hal: Adding input device Primax Electronics Apple Optical USB Mouse
>(**) Primax Electronics Apple Optical USB Mouse: always reports core events
>(**) Primax Electronics Apple Optical USB Mouse: Device: "/dev/input/event13"
>(II) Primax Electronics Apple Optical USB Mouse: Found 8 mouse buttons
>(II) Primax Electronics Apple Optical USB Mouse: Found x and y relative axes
>(II) Primax Electronics Apple Optical USB Mouse: Found scroll wheel(s)
>(II) Primax Electronics Apple Optical USB Mouse: Configuring as mouse
>(**) Primax Electronics Apple Optical USB Mouse: YAxisMapping: buttons 4 and 5
>(**) Primax Electronics Apple Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Primax Electronics Apple Optical USB Mouse" (type: MOUSE)
>(**) Option "AccelerationScheme" "lightweight"
>(**) Primax Electronics Apple Optical USB Mouse: (accel) selected scheme lightweight/2
>(II) Primax Electronics Apple Optical USB Mouse: initialized for relative axes.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 1280x1024 stride 1280
>(II) intel(0): New front buffer at 0x271b000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2560x1024 stride 2560
>(II) intel(0): New front buffer at 0x2f1b000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
>(II) intel(0): New front buffer at 0x3f1b000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
>(II) intel(0): New front buffer at 0xee88000
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) config/hal: removing device Primax Electronics Apple Optical USB Mouse
>(II) Primax Electronics Apple Optical USB Mouse: Close
>(II) UnloadModule: "evdev"
>(II) config/hal: removing device USB-compliant keyboard
>(II) USB-compliant keyboard: Close
>(II) UnloadModule: "evdev"
>(II) config/hal: removing device USB-compliant keyboard
>(II) USB-compliant keyboard: Close
>(II) UnloadModule: "evdev"
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) config/hal: Adding input device Primax Electronics Apple Optical USB Mouse
>(**) Primax Electronics Apple Optical USB Mouse: always reports core events
>(**) Primax Electronics Apple Optical USB Mouse: Device: "/dev/input/event11"
>(II) Primax Electronics Apple Optical USB Mouse: Found 8 mouse buttons
>(II) Primax Electronics Apple Optical USB Mouse: Found x and y relative axes
>(II) Primax Electronics Apple Optical USB Mouse: Found scroll wheel(s)
>(II) Primax Electronics Apple Optical USB Mouse: Configuring as mouse
>(**) Primax Electronics Apple Optical USB Mouse: YAxisMapping: buttons 4 and 5
>(**) Primax Electronics Apple Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Primax Electronics Apple Optical USB Mouse" (type: MOUSE)
>(**) Option "AccelerationScheme" "lightweight"
>(**) Primax Electronics Apple Optical USB Mouse: (accel) selected scheme lightweight/2
>(II) Primax Electronics Apple Optical USB Mouse: initialized for relative axes.
>(II) config/hal: Adding input device USB-compliant keyboard
>(**) USB-compliant keyboard: always reports core events
>(**) USB-compliant keyboard: Device: "/dev/input/event12"
>(II) USB-compliant keyboard: Found keys
>(II) USB-compliant keyboard: Configuring as keyboard
>(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) config/hal: Adding input device USB-compliant keyboard
>(**) USB-compliant keyboard: always reports core events
>(**) USB-compliant keyboard: Device: "/dev/input/event13"
>(II) USB-compliant keyboard: Found 14 mouse buttons
>(II) USB-compliant keyboard: Found x and y relative axes
>(II) USB-compliant keyboard: Found scroll wheel(s)
>(II) USB-compliant keyboard: Found keys
>(II) USB-compliant keyboard: Configuring as mouse
>(II) USB-compliant keyboard: Configuring as keyboard
>(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
>(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(**) Option "AccelerationScheme" "lightweight"
>(**) USB-compliant keyboard: (accel) selected scheme lightweight/2
>(II) USB-compliant keyboard: initialized for relative axes.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 1280x960 stride 1280
>(II) intel(0): New front buffer at 0x5500000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2560x960 stride 2560
>(II) intel(0): New front buffer at 0x6500000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
>(II) intel(0): New front buffer at 0x9e0e000
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
>(II) intel(0): New front buffer at 0xb55d000
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) config/hal: removing device Primax Electronics Apple Optical USB Mouse
>(II) Primax Electronics Apple Optical USB Mouse: Close
>(II) UnloadModule: "evdev"
>(II) config/hal: removing device USB-compliant keyboard
>(II) USB-compliant keyboard: Close
>(II) UnloadModule: "evdev"
>(II) config/hal: removing device USB-compliant keyboard
>(II) USB-compliant keyboard: Close
>(II) UnloadModule: "evdev"
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(WW) intel(0): ESR is 0x00000001
>(WW) intel(0): Existing errors found in hardware state.
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) config/hal: Adding input device USB-compliant keyboard
>(**) USB-compliant keyboard: always reports core events
>(**) USB-compliant keyboard: Device: "/dev/input/event11"
>(II) USB-compliant keyboard: Found keys
>(II) USB-compliant keyboard: Configuring as keyboard
>(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) config/hal: Adding input device USB-compliant keyboard
>(**) USB-compliant keyboard: always reports core events
>(**) USB-compliant keyboard: Device: "/dev/input/event12"
>(II) USB-compliant keyboard: Found 14 mouse buttons
>(II) USB-compliant keyboard: Found x and y relative axes
>(II) USB-compliant keyboard: Found scroll wheel(s)
>(II) USB-compliant keyboard: Found keys
>(II) USB-compliant keyboard: Configuring as mouse
>(II) USB-compliant keyboard: Configuring as keyboard
>(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
>(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(**) Option "AccelerationScheme" "lightweight"
>(**) USB-compliant keyboard: (accel) selected scheme lightweight/2
>(II) USB-compliant keyboard: initialized for relative axes.
>(II) config/hal: Adding input device Primax Electronics Apple Optical USB Mouse
>(**) Primax Electronics Apple Optical USB Mouse: always reports core events
>(**) Primax Electronics Apple Optical USB Mouse: Device: "/dev/input/event13"
>(II) Primax Electronics Apple Optical USB Mouse: Found 8 mouse buttons
>(II) Primax Electronics Apple Optical USB Mouse: Found x and y relative axes
>(II) Primax Electronics Apple Optical USB Mouse: Found scroll wheel(s)
>(II) Primax Electronics Apple Optical USB Mouse: Configuring as mouse
>(**) Primax Electronics Apple Optical USB Mouse: YAxisMapping: buttons 4 and 5
>(**) Primax Electronics Apple Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Primax Electronics Apple Optical USB Mouse" (type: MOUSE)
>(**) Option "AccelerationScheme" "lightweight"
>(**) Primax Electronics Apple Optical USB Mouse: (accel) selected scheme lightweight/2
>(II) Primax Electronics Apple Optical USB Mouse: initialized for relative axes.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 1280x960 stride 1280
>(II) intel(0): New front buffer at 0x6ff4000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2560x960 stride 2560
>(II) intel(0): New front buffer at 0x89f4000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
>(II) intel(0): New front buffer at 0xb114000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2560x1024 stride 2560
>(II) intel(0): New front buffer at 0xeb8a000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
>(II) intel(0): New front buffer at 0x4d61000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2560x960 stride 2560
>(II) intel(0): New front buffer at 0xa8c8000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
>(II) intel(0): New front buffer at 0xb8c8000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2560x960 stride 2560
>(II) intel(0): New front buffer at 0xeb88000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
>(II) intel(0): New front buffer at 0xb238000
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
>(II) intel(0): New front buffer at 0xc238000
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) config/hal: removing device USB-compliant keyboard
>(II) USB-compliant keyboard: Close
>(II) UnloadModule: "evdev"
>(II) config/hal: removing device USB-compliant keyboard
>(II) USB-compliant keyboard: Close
>(II) UnloadModule: "evdev"
>(II) config/hal: removing device Primax Electronics Apple Optical USB Mouse
>(II) Primax Electronics Apple Optical USB Mouse: Close
>(II) UnloadModule: "evdev"
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "SEC", prod id 41235
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "SEC", prod id 41235
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "SEC", prod id 41235
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "SEC", prod id 41235
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2304x800 stride 2304
>(II) intel(0): New front buffer at 0x446d000
>(II) config/hal: Adding input device Logitech USB wireless Mouse & Presenter
>(**) Logitech USB wireless Mouse & Presenter: always reports core events
>(**) Logitech USB wireless Mouse & Presenter: Device: "/dev/input/event12"
>(II) Logitech USB wireless Mouse & Presenter: Found 3 mouse buttons
>(II) Logitech USB wireless Mouse & Presenter: Found x and y relative axes
>(II) Logitech USB wireless Mouse & Presenter: Found scroll wheel(s)
>(II) Logitech USB wireless Mouse & Presenter: Configuring as mouse
>(**) Logitech USB wireless Mouse & Presenter: YAxisMapping: buttons 4 and 5
>(**) Logitech USB wireless Mouse & Presenter: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Logitech USB wireless Mouse & Presenter" (type: MOUSE)
>(**) Option "AccelerationScheme" "lightweight"
>(**) Logitech USB wireless Mouse & Presenter: (accel) selected scheme lightweight/2
>(II) Logitech USB wireless Mouse & Presenter: initialized for relative axes.
>(II) config/hal: Adding input device Logitech USB wireless Mouse & Presenter
>(**) Logitech USB wireless Mouse & Presenter: always reports core events
>(**) Logitech USB wireless Mouse & Presenter: Device: "/dev/input/event11"
>(II) Logitech USB wireless Mouse & Presenter: Found 1 mouse buttons
>(II) Logitech USB wireless Mouse & Presenter: Found scroll wheel(s)
>(II) Logitech USB wireless Mouse & Presenter: Found keys
>(II) Logitech USB wireless Mouse & Presenter: Configuring as keyboard
>(II) Logitech USB wireless Mouse & Presenter: Adding scrollwheel support
>(**) Logitech USB wireless Mouse & Presenter: YAxisMapping: buttons 4 and 5
>(**) Logitech USB wireless Mouse & Presenter: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Logitech USB wireless Mouse & Presenter" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(EE) Logitech USB wireless Mouse & Presenter: failed to initialize for relative axes.
>(II) config/hal: removing device Logitech USB wireless Mouse & Presenter
>(II) Logitech USB wireless Mouse & Presenter: Close
>(II) UnloadModule: "evdev"
>(II) config/hal: removing device Logitech USB wireless Mouse & Presenter
>(II) Logitech USB wireless Mouse & Presenter: Close
>(II) UnloadModule: "evdev"
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00ea6fff: front buffer (7200 kB) X tiled
>(II) intel(0): 0x00f9f000-0x00f9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00fa0000-0x00fa9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe A
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
>(II) intel(0): New front buffer at 0x34a5000
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) config/hal: Adding input device Primax Electronics Apple Optical USB Mouse
>(**) Primax Electronics Apple Optical USB Mouse: always reports core events
>(**) Primax Electronics Apple Optical USB Mouse: Device: "/dev/input/event11"
>(II) Primax Electronics Apple Optical USB Mouse: Found 8 mouse buttons
>(II) Primax Electronics Apple Optical USB Mouse: Found x and y relative axes
>(II) Primax Electronics Apple Optical USB Mouse: Found scroll wheel(s)
>(II) Primax Electronics Apple Optical USB Mouse: Configuring as mouse
>(**) Primax Electronics Apple Optical USB Mouse: YAxisMapping: buttons 4 and 5
>(**) Primax Electronics Apple Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Primax Electronics Apple Optical USB Mouse" (type: MOUSE)
>(**) Option "AccelerationScheme" "lightweight"
>(**) Primax Electronics Apple Optical USB Mouse: (accel) selected scheme lightweight/2
>(II) Primax Electronics Apple Optical USB Mouse: initialized for relative axes.
>(II) config/hal: Adding input device USB-compliant keyboard
>(**) USB-compliant keyboard: always reports core events
>(**) USB-compliant keyboard: Device: "/dev/input/event12"
>(II) USB-compliant keyboard: Found keys
>(II) USB-compliant keyboard: Configuring as keyboard
>(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) config/hal: Adding input device USB-compliant keyboard
>(**) USB-compliant keyboard: always reports core events
>(**) USB-compliant keyboard: Device: "/dev/input/event13"
>(II) USB-compliant keyboard: Found 14 mouse buttons
>(II) USB-compliant keyboard: Found x and y relative axes
>(II) USB-compliant keyboard: Found scroll wheel(s)
>(II) USB-compliant keyboard: Found keys
>(II) USB-compliant keyboard: Configuring as mouse
>(II) USB-compliant keyboard: Configuring as keyboard
>(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
>(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(**) Option "AccelerationScheme" "lightweight"
>(**) USB-compliant keyboard: (accel) selected scheme lightweight/2
>(II) USB-compliant keyboard: initialized for relative axes.
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 1280x1024 stride 1280
>(II) intel(0): New front buffer at 0x4a8f000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2560x1024 stride 2560
>(II) intel(0): New front buffer at 0x5e8f000
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
>(II) intel(0): New front buffer at 0x6e8f000
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
>(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
>(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe A
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(WW) config/hal: device AT Translated Set 2 keyboard already added. Ignoring.
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "ACR", prod id 44416
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
>(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
>(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(WW) intel(0): ESR is 0x00000001
>(WW) intel(0): Existing errors found in hardware state.
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe A
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
>(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
>(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(WW) intel(0): ESR is 0x00000001
>(WW) intel(0): Existing errors found in hardware state.
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe A
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
>(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
>(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(WW) intel(0): ESR is 0x00000001
>(WW) intel(0): Existing errors found in hardware state.
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe A
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
>(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
>(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(WW) intel(0): ESR is 0x00000001
>(WW) intel(0): Existing errors found in hardware state.
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe A
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
>(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
>(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(WW) intel(0): ESR is 0x00000001
>(WW) intel(0): Existing errors found in hardware state.
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe A
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
>(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
>(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(WW) intel(0): ESR is 0x00000001
>(WW) intel(0): Existing errors found in hardware state.
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe A
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) USB-compliant keyboard: Device reopened after 1 attempts.
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
>(II) intel(0): New front buffer at 0xf09f000
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) config/hal: removing device Primax Electronics Apple Optical USB Mouse
>(II) Primax Electronics Apple Optical USB Mouse: Close
>(II) UnloadModule: "evdev"
>(II) config/hal: removing device USB-compliant keyboard
>(II) USB-compliant keyboard: Close
>(II) UnloadModule: "evdev"
>(II) config/hal: removing device USB-compliant keyboard
>(II) USB-compliant keyboard: Close
>(II) UnloadModule: "evdev"
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) AIGLX: Suspending AIGLX clients for VT switch
>(II) AIGLX: Resuming AIGLX clients after VT switch
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
>(II) intel(0): 0x0077f000:            end of stolen memory
>(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x0077f000:            start of memory manager
>(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
>(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
>(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(II) intel(0): using SSC reference clock of 96 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(--) SynPS/2 Synaptics TouchPad: touchpad found
>(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
>(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
>(II) intel(0): EDID vendor "AUO", prod id 13588
>(WW) intel(0): i830_uxa_prepare_access: bo map failed
>
>Backtrace:
>0: /usr/bin/Xorg(xorg_backtrace+0x3b) [0x812c56b]
>1: /usr/bin/Xorg(xf86SigHandler+0x9e) [0x80ca32e]
>2: [0xb7f4c400]
>3: /usr/lib/X11/modules/libfb.so(fbCopyNtoN+0x24c) [0xb77c377c]
>4: /usr/lib/X11/modules/drivers/intel_drv.so(uxa_copy_n_to_n+0x73a) [0xb79b092a]
>5: /usr/lib/X11/modules/libfb.so(fbCopyRegion+0x213) [0xb77c2703]
>6: /usr/lib/X11/modules/libfb.so(fbDoCopy+0x44d) [0xb77c2c2d]
>7: /usr/lib/X11/modules/drivers/intel_drv.so(uxa_copy_area+0x98) [0xb79b0188]
>8: /usr/bin/Xorg [0x8179573]
>9: /usr/bin/Xorg(ProcCopyArea+0x165) [0x8084be5]
>10: /usr/bin/Xorg(Dispatch+0x35f) [0x808694f]
>11: /usr/bin/Xorg(main+0x395) [0x806bb05]
>12: /lib/libc.so.6(__libc_start_main+0xe6) [0xb7b3ab26]
>13: /usr/bin/Xorg [0x806afb1]
>
>Fatal server error:
>Caught signal 11.  Server aborting
>
>
>Please consult the The X.Org Foundation support 
>	 at https://bugzilla.altlinux.org/
> for help. 
>Please also check the log file at "/var/log/Xorg.0.log" for additional information.
>
>(II) AT Translated Set 2 keyboard: Close
>(II) UnloadModule: "evdev"
>(II) Macintosh mouse button emulation: Close
>(II) UnloadModule: "evdev"
>(II) UnloadModule: "synaptics"
>(II) AIGLX: Suspending AIGLX clients for VT switch

Actions: View

Attachments on bug 22356: 4072