Спящий режим запускаю через меню KLaptop из трея. ---------------------------------- Конец dmesg: PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -done (0 pages freed) PM: Freed 0 kbytes in 0.05 seconds (0.00 MB/s) Suspending console(s) sd 2:0:0:0: [sda] Synchronizing SCSI cache nsc-ircc 00:0a: disabled ACPI handle has no context! ACPI handle has no context! ACPI: PCI interrupt for device 0000:0f:06.3 disabled ACPI handle has no context! ACPI handle has no context! ACPI: PCI interrupt for device 0000:0f:06.2 disabled ACPI handle has no context! ACPI handle has no context! ACPI: PCI interrupt for device 0000:04:00.0 disabled [fglrx] firegl_gps_setpowerdown . ACPI: PCI interrupt for device 0000:01:00.0 disabled ACPI: PCI interrupt for device 0000:00:1f.2 disabled ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled usb_hcd_pci_suspend(): ehci_pci_suspend+0x0/0xb0 [ehci_hcd]() returns -22 pci_device_suspend(): usb_hcd_pci_suspend+0x0/0x160 [usbcore]() returns -22 suspend_device(): pci_device_suspend+0x0/0x60() returns -22 Could not suspend device 0000:00:1a.7: error -22 PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10b) PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing fc400004) PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10) PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2880001, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.1 to 64 PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007) ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 [fglrx:KCL_enable_pat] *ERROR* Pat entry 2 is already configured ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 [fglrx] firegl_gps_setpowerup . PCI: Enabling device 0000:04:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10b) PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, writing f8000000) PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100002, writing 100106) Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX PM: Writing back config space on device 0000:0f:06.1 at offset f (was 4020100, writing 402010b) PM: Writing back config space on device 0000:0f:06.1 at offset 5 (was 0, writing fc104000) PM: Writing back config space on device 0000:0f:06.1 at offset 4 (was 0, writing fc102000) PM: Writing back config space on device 0000:0f:06.1 at offset 3 (was 800000, writing 802010) PM: Writing back config space on device 0000:0f:06.1 at offset 1 (was 2100000, writing 2100116) ata4: SATA link down (SStatus 0 SControl 0) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fc102000-fc1027ff] Max Packet=[2048] IR/IT contexts=[4/8] PM: Writing back config space on device 0000:0f:06.2 at offset f (was 40701ff, writing 407010b) PM: Writing back config space on device 0000:0f:06.2 at offset 4 (was 0, writing fc101000) PM: Writing back config space on device 0000:0f:06.2 at offset 3 (was 800000, writing 803910) PM: Writing back config space on device 0000:0f:06.2 at offset 1 (was 2100000, writing 2100106) ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22 ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out PM: Writing back config space on device 0000:0f:06.3 at offset f (was 40701ff, writing 407010b) PM: Writing back config space on device 0000:0f:06.3 at offset 4 (was 0, writing fc102800) PM: Writing back config space on device 0000:0f:06.3 at offset 3 (was 800000, writing 803910) PM: Writing back config space on device 0000:0f:06.3 at offset 1 (was 2100000, writing 2100106) ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22 nsc-ircc 00:0a: activated ata1.00: configured for UDMA/33 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata3.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out ata3.00: configured for UDMA/133 sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] Starting disk Restarting tasks ... done. ----------------------------- [user@localhost ~]$ free -m total used free shared buffers cached Mem: 2025 537 1488 0 68 215 -/+ buffers/cache: 253 1772 Swap: 4047 0 4047 -----------------------------
RC-20080930 - ошибка повторяется, но иногда всё-таки можно перевести комп в спящий режим после Kaffeine, но только если Kaffeine предварительно закрыть.
В дистрибутиве ALT Linux 4.1 Desktop ошибка сохраняется :-((((((( Ещё могу добавить, что вероятность возникновения ошибки сильно повышается после работы kaffeine в полноэкранном режиме.
Снова комп не смог перейти в спящий режим. Теперь уже без kaffeine :-( Из серьезных приложений работала VirtualBox Вот конец dmesg : ------------------------------------------------- PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... done (101693 pages freed) PM: Freed 406772 kbytes in 0.67 seconds (607.12 MB/s) Suspending console(s) sd 2:0:0:0: [sda] Synchronizing SCSI cache nsc-ircc 00:0a: disabled ACPI handle has no context! ACPI handle has no context! ACPI: PCI interrupt for device 0000:0f:06.3 disabled ACPI handle has no context! ACPI handle has no context! ACPI: PCI interrupt for device 0000:0f:06.2 disabled ACPI handle has no context! ACPI handle has no context! ACPI: PCI interrupt for device 0000:04:00.0 disabled [fglrx] firegl_gps_setpowerdown . ACPI: PCI interrupt for device 0000:01:00.0 disabled ACPI: PCI interrupt for device 0000:00:1f.2 disabled ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI interrupt for device 0000:00:1a.7 disabled ACPI: PCI interrupt for device 0000:00:1a.1 disabled ACPI: PCI interrupt for device 0000:00:1a.0 disabled ACPI: Preparing to enter system sleep state S4 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching sched-domain: domain 0: span 00000001 groups: 00000001 CPU1 is down PM: Creating hibernation image: PM: Need to copy 125852 pages Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling non-boot CPUs ... CPU0 attaching NULL sched-domain. SMP alternatives: switching to SMP code Booting processor 1/1 ip 4000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.25 BogoMIPS (lpj=7980503) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a CPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002 CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001 CPU1 is up Switched to high resolution mode on CPU 1 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 usb usb1: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.7 to 64 PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20100f00, writing 20130f00) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2880001, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.1 to 64 PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007) ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 [fglrx] firegl_gps_setpowerup . PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing c0960000) PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100106, writing 40100506) ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:0f:06.0 at offset f (was 3c4010b, writing 5c0010b) PM: Writing back config space on device 0000:0f:06.0 at offset 3 (was 825110, writing 82a820) PM: Writing back config space on device 0000:0f:06.0 at offset 1 (was 2100107, writing 2100007) Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fc102000-fc1027ff] Max Packet=[2048] IR/IT contexts=[4/8] PM: Writing back config space on device 0000:0f:06.2 at offset f (was 40701ff, writing 407010b) PM: Writing back config space on device 0000:0f:06.2 at offset 4 (was 0, writing fc101000) PM: Writing back config space on device 0000:0f:06.2 at offset 3 (was 800000, writing 803910) PM: Writing back config space on device 0000:0f:06.2 at offset 1 (was 2100000, writing 2100106) ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22 ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22 nsc-ircc 00:0a: activated ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4: SATA link down (SStatus 0 SControl 0) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/33 ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata3.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out ata3.00: configured for UDMA/133 sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] Starting disk uvcvideo: Failed to query (1) UVC control 2 (unit 0) : -71 (exp. 26). uvcvideo 6-1:1.1: resume error -5 ehci_hcd 0000:00:1a.7: HC died; cleaning up Restarting tasks ... done. usb 6-1: USB disconnect, address 2 wlan0: RX deauthentication from 00:1e:58:81:a9:fd (reason=6) wlan0: deauthenticated wlan0: authenticate with AP 00:1e:58:81:a9:fd wlan0: RX authentication from 00:1e:58:81:a9:fd (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:1e:58:81:a9:fd wlan0: RX ReassocResp from 00:1e:58:81:a9:fd (capab=0x431 status=0 aid=1) wlan0: associated wlan0: switched to short barker preamble (BSSID=00:1e:58:81:a9:fd) atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... done (258326 pages freed) PM: Freed 1033304 kbytes in 8.92 seconds (115.84 MB/s) Suspending console(s) sd 2:0:0:0: [sda] Synchronizing SCSI cache nsc-ircc 00:0a: disabled ACPI handle has no context! ACPI handle has no context! ACPI: PCI interrupt for device 0000:0f:06.3 disabled ACPI handle has no context! ACPI handle has no context! ACPI: PCI interrupt for device 0000:0f:06.2 disabled ACPI handle has no context! ACPI handle has no context! ACPI: PCI interrupt for device 0000:04:00.0 disabled [fglrx] firegl_gps_setpowerdown . ACPI: PCI interrupt for device 0000:01:00.0 disabled ACPI: PCI interrupt for device 0000:00:1f.2 disabled ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled usb_hcd_pci_suspend(): ehci_pci_suspend+0x0/0xb0 [ehci_hcd]() returns -22 pci_device_suspend(): usb_hcd_pci_suspend+0x0/0x160 [usbcore]() returns -22 suspend_device(): pci_device_suspend+0x0/0x60() returns -22 Could not suspend device 0000:00:1a.7: error -22 PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10b) PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing fc400004) PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10) PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2880001, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.1 to 64 PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007) ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 [fglrx:KCL_enable_pat] *ERROR* Pat entry 2 is already configured ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 [fglrx] firegl_gps_setpowerup . PCI: Enabling device 0000:04:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10b) PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, writing f8000000) PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100002, writing 100106) Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX PM: Writing back config space on device 0000:0f:06.1 at offset f (was 4020100, writing 402010b) PM: Writing back config space on device 0000:0f:06.1 at offset 5 (was 0, writing fc104000) PM: Writing back config space on device 0000:0f:06.1 at offset 4 (was 0, writing fc102000) PM: Writing back config space on device 0000:0f:06.1 at offset 3 (was 800000, writing 802010) PM: Writing back config space on device 0000:0f:06.1 at offset 1 (was 2100000, writing 2100116) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fc102000-fc1027ff] Max Packet=[2048] IR/IT contexts=[4/8] ata4: SATA link down (SStatus 0 SControl 0) PM: Writing back config space on device 0000:0f:06.2 at offset f (was 40701ff, writing 407010b) PM: Writing back config space on device 0000:0f:06.2 at offset 4 (was 0, writing fc101000) PM: Writing back config space on device 0000:0f:06.2 at offset 3 (was 800000, writing 803910) PM: Writing back config space on device 0000:0f:06.2 at offset 1 (was 2100000, writing 2100106) ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22 PM: Writing back config space on device 0000:0f:06.3 at offset f (was 40701ff, writing 407010b) PM: Writing back config space on device 0000:0f:06.3 at offset 4 (was 0, writing fc102800) PM: Writing back config space on device 0000:0f:06.3 at offset 3 (was 800000, writing 803910) PM: Writing back config space on device 0000:0f:06.3 at offset 1 (was 2100000, writing 2100106) ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22 nsc-ircc 00:0a: activated ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata3.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out ata1.00: configured for UDMA/33 ata3.00: configured for UDMA/133 sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] Starting disk Restarting tasks ... done. -------------------------------------------------------- Рецидивы прогрессируют, однако :-(
Хм. У меня переходит без проблем.
попробуте в /etc/powersave/sleep UNLOAD_MODULES_BEFORE_SUSPEND2DISK и UNLOAD_MODULES_BEFORE_SUSPEND2RAM добавить ehci_hcd ohci_hcd uhci_hcd. после изменения конфига надо сделать service powersaved restart
(In reply to comment #5) 1. Пакет powersave у меня не стоял. 2. Для проверки Вашей рекомендации я его установил. 3. НЕ ПОМОГЛО :-( Лог в конце сообщения. 4. Оставлять ли мне powersave или удалить ? Вот лог: [root@localhost hibermate]# hibernate -v3 > 2.txt [root@localhost hibermate]# cat 2.txt hibernate: Trying method in suspend2.conf... hibernate: Trying method in disk.conf... hibernate: Trying method in ususpend-disk.conf... hibernate: Including configuration from common.conf hibernate: Trying method in sysfs-disk.conf... hibernate: Including configuration from common.conf hibernate: [01] Executing CheckLastResume ... hibernate: [01] Executing CheckRunlevel ... hibernate: [01] Executing LockFileGet ... hibernate: [01] Executing NewKernelFileCheck ... hibernate: [10] Executing EnsureSysfsPowerStateCapable ... hibernate: [11] Executing XHacksSuspendHook1 ... hibernate: [59] Executing RemountXFSBootRO ... hibernate: [89] Executing SaveKernelModprobe ... Saved /proc/sys/kernel/modprobe is /sbin/modprobe hibernate: [91] Executing ModulesUnloadBlacklist ... Unloading blacklisted modules listed /etc/hibernate/blacklisted-modules Module version for ipw2100 is 66050 Module version for ipw2200 is 66050 Module version for snd_bt_sco is Module version for ndiswrapper is 79104 Unloading blacklisted module iwl3945 (and dependencies) Unloading iwl3945 ... Removing modules with rmmod. Unloading blacklisted module mac80211 (and dependencies) Unloading mac80211 ... Unloading blacklisted module nsc_ircc (and dependencies) Unloading nsc_ircc ... Unloading blacklisted module irda (and dependencies) Unloading irda ... Unloading blacklisted module crc_ccitt (and dependencies) Unloading irda ... Unloading crc_ccitt ... Some modules failed to unload: irda irda crc_ccitt hibernate: Aborting suspend due to errors in ModulesUnloadBlacklist (use --force to override). hibernate: [90] Executing ModulesLoad ... Loading module iwl3945 (from auto)... Loading module mac80211 (from auto)... Loading module nsc_ircc (from auto)... Loading module iwl3945 (from auto)... Loading module mac80211 (from auto)... Loading module nsc_ircc (from auto)... hibernate: [89] Executing RestoreKernelModprobe ... hibernate: [85] Executing XHacksResumeHook2 ... hibernate: [70] Executing ClockRestore ... hibernate: [70] Executing ClockRestore ... hibernate: [59] Executing RemountXFSBootRW ... hibernate: [11] Executing XHacksResumeHook1 ... hibernate: [01] Executing NoteLastResume ... hibernate: [01] Executing LockFilePut ... PS: "hibermate" - смешно же я директорию назвал :-)
Поддержка дистрибутива завершена. Используйте новые версии.
